Texas Instruments

LM2904VQDR - Dual 30V 700kHz Op Amp | Texas Instruments

MPN: LM2904VQDR ✓ فعال
30 V Vdss 8-pin SOIC Package
حداقل سفارش: 1 |

LM2904VQDR نمای کلی

The Texas Instruments LM2904VQDR is a dual, general-purpose operational amplifier with a 30 V supply rating, 700 kHz gain-bandwidth product, and operation from -40 °C to 125 °C, supplied in an 8-pin SOIC package. The LM2904VQDR combines two amplifier channels in one package, making it suitable for signal conditioning, transducer amplification, and general analog control applications where a wide supply range and automotive-capable temperature operation are important.

An operational amplifier is an analog integrated circuit that amplifies the difference between two input voltages. Its place in the signal-chain hierarchy is amplifier IC → operational amplifier → analog signal-conditioning IC → semiconductor. A differential input stage, high open-loop gain, and internally compensated design allow the device to form stable closed-loop gain stages with external resistors or capacitors.

Key features include two amplifier circuits per package, a 700 kHz gain-bandwidth product, and a maximum supply rating of 30 V. The bipolar architecture supports conventional general-purpose applications using single or split supplies. An 8-pin SOIC body measures 0.154 inches wide and 3.90 mm in body width. The manufacturer identifies the LM2904V family as an enhanced alternative to the original LM2904, with operation extending to 125 °C.

The 700 kHz gain-bandwidth product makes the amplifier suitable for low-frequency instrumentation and feedback-control loops rather than high-speed signal chains. Because both channels share one package, grounding and supply-decoupling practices apply to the complete device, and unused channels should be configured according to the manufacturer's recommended stable-input circuit.

Typical uses include industrial sensor interfaces, audio preamplifier stages, current-to-voltage converters, active filters, and power-supply feedback loops. The wide operating range also supports automotive and rugged industrial equipment when the board design, external components, and qualification requirements meet the application specification.

A key design consideration is common-mode and output-swing headroom. Review the input common-mode range and output voltage limits in the manufacturer datasheet for the chosen supply voltage. Decouple each supply pin locally, route feedback connections away from high-current switching nodes, and verify stability with the exact source and load impedances used in production.

This page combines the LM2904VQDR family specifications, package information, pin-compatible alternatives, application guidance, and design notes to help engineers qualify the amplifier and plan a board-level replacement without relying on a single parameter listing.

جایگزین‌های drop-in برای LM2904VQDR — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای LM2904VQDR (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Operating Temperature Range, Maximum Supply Voltage, Amplifier Type, Slew Rate.

Texas Instruments
Package: 8-SOIC, 3.90 mm width
Slew Rate: 0.3 V/µs
مقایسه با LM2904VQDR →
Texas Instruments
Package: 8-pin SOIC
Operating Temperature Range: -40°C to +125°C
Maximum Supply Voltage: 36 V
مقایسه با LM2904VQDR →
Texas Instruments
Package: SOIC-8 (D)
Operating Temperature Range: -40 C to +125 C
Slew Rate: 0.5 V/us (typical)
مقایسه با LM2904VQDR →
Texas Instruments
Package: 8-pin SOIC
Operating Temperature Range: -40 °C to +85 °C
Maximum Supply Voltage: 26 V
Texas Instruments
Package: 8-pin SOIC, 3.90 mm width
Operating Temperature Range: -40°C to +125°C
Maximum Supply Voltage: 32 V
مقایسه با LM2904VQDR →
STMicroelectronics
Package: 8-SOIC
Slew Rate: 0.6 V/µs
مقایسه با LM2904VQDR →

LM2904VQD

✅ جایگزین مستقیم
📦 8-pin SOIC
Same LM2904V family and SOIC-8 footprint; orderable suffix and temperature-grade details differ by 0 to 5% depending on the ordering designation.

📋 جایگزین مرجع (خارج از کاتالوگ)

LM2904BIDR

✅ جایگزین مستقیم
Texas Instruments
📦 8-pin SOIC
Texas Instruments · Industry-standard dual operational amplifier · 2 (Dual) · 3 V to 36 V · +/-1.5 V to +/-18 V · 1.2 MHz · 0.5 V/us (typical) · 0.5 mV typical / 3 mV maximum

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LM2904BAIDR

✅ جایگزین مستقیم
Texas Instruments
📦 8-pin SOIC
Dual general-purpose operational amplifier · 2 circuits · 36 V · 1.2 MHz · 2 mV maximum · -40°C to +125°C · 8-pin SOIC · Surface mount

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LM2904AVQDRG4

✅ جایگزین مستقیم
Texas Instruments
📦 8-pin SOIC
2 channels · General-purpose operational amplifier · 1 MHz · 700 kHz · 0.3 V/µs · 36 V · 26 V · 3 V

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LM2904M/NOPB

✅ جایگزین مستقیم
Texas Instruments
📦 8-pin SOIC
2-circuit operational amplifier · 2 units · 26 V · 700 kHz · Single or split supply · -40 °C to +85 °C · 8-pin SOIC · Surface mount

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LM2904YDT

✅ جایگزین مستقیم
STMicroelectronics
📦 8-pin SOIC
General-purpose operational amplifier · 2 channels · 2 circuits · Dual independent operational amplifier · Low-power · 30 V · 0.6 V/µs · Single-ended

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LM2904VQDR حداکثر مقادیر مجاز و مشخصات الکتریکی

Amplifier Type General-Purpose Operational Amplifier
Number of Channels 2 channels
Architecture Bipolar voltage-feedback
Maximum Supply Voltage 30 V
Gain-Bandwidth Product 700 kHz
محدوده دمای کاری -40 °C to 125 °C
Package Type 8-pin SOIC
Package Width 0.154 in (3.90 mm)
نوع نصب Surface Mount
وضعیت چرخه عمر Active
Lead-Free Status Yes
MSL MSL 1
Maximum Reflow Temperature 260 °C
RoHS Compliance Yes
REACH Compliance Compliant

راهنمای پیکربندی پین LM2904VQDR 0.154 in (3.90 mm)

پیکربندی پین برای LM2904VQDR (پکیج 0.154 in (3.90 mm)). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 0.154 in (3.90 mm) برای LM2904VQDR

داده پین‌آوت تفصیلی موجود نیست برای LM2904VQDR.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

LM2904VQDR مناسب است برای 6 کاربردs: Industrial Sensor Signal Conditioning, Audio Preamplifier Stage, Current-to-Voltage Conversion, Active Filtering and Control Loops, Automotive and Rugged Control Electronics, Power-Supply Feedback Monitoring.

🏭

Industrial Sensor Signal Conditioning

The LM2904VQDR is appropriate for amplifying low-level sensor signals where two channels are needed for differential measurement and buffer functions. Its 30 V supply rating provides headroom for industrial rails, while operation from -40 °C to 125 °C supports temperature-controlled equipment. Configure the amplifier in a noise-gain configuration and confirm that the sensor output remains inside the input common-mode range. The 700 kHz gain-bandwidth product is well suited to temperature, pressure, and position sensors with moderate bandwidth. Keep the feedback resistors close to the amplifier pins, use short ground returns, and place supply-bypass capacitors at the package to reduce noise pickup.

🎧

Audio Preamplifier Stage

The LM2904VQDR can form a general-purpose audio preamplifier stage when the signal path does not require the bandwidth or low-noise performance of a dedicated audio amplifier. One channel can amplify the incoming program signal, and the second can provide gain or buffering in a balanced or auxiliary path. The device's dual bipolar architecture and 8-pin SOIC footprint simplify board partitioning. At the 700 kHz gain-bandwidth product, closed-loop gains must remain low enough to preserve usable bandwidth. Check output swing at the selected supply and keep the input network referenced to a defined bias when the circuit operates from a single supply.

⚡

Current-to-Voltage Conversion

The LM2904VQDR is suitable for a shunt-based current measurement when the shunt voltage stays within the amplifier's input common-mode range. Its bipolar input stage is useful around a zero-volt reference, and the 700 kHz gain-bandwidth product supports moderate-speed feedback networks. The principal accuracy limits are input offset voltage, input bias current, feedback-resistor tolerance, and shunt tolerance. Confirm the maximum shunt signal at the highest current and verify that the output remains within the output-swing limits. A dedicated instrumentation amplifier may be preferable when very low offset or high common-mode rejection is required.

🔧

Active Filtering and Control Loops

The LM2904VQDR can implement active filters, integrators, and low-frequency feedback-control loops where 700 kHz of gain-bandwidth product is adequate for the intended closed-loop bandwidth. Two independent channels allow a filter stage to be followed by an output amplifier within one package. Select resistor and capacitor values against the datasheet's recommended operating range and verify stability with the actual load. Keep the summing node and feedback components physically compact to minimize parasitic capacitance and phase error. When driving a capacitive or long cable load, add an isolation resistor close to the output to reduce oscillation risk.

🚗

Automotive and Rugged Control Electronics

The LM2904VQDR is suited to control and conditioning electronics operating across -40 °C to 125 °C when the complete design satisfies its automotive application requirements. Its 30 V maximum supply rating supports headroom above a 12 V or 24 V automotive rail after accounting for transients and regulation margin. The dual amplifier can condition a feedback signal and monitor an actuator in one package. Place a local bypass capacitor on the supply pin, maintain a low-impedance ground return, and follow the manufacturer's guidance for unused channels. Automotive qualification also depends on the specific orderable device, change-control requirements, and the complete production test process.

🖥️

Power-Supply Feedback Monitoring

The LM2904VQDR can amplify the error signal or sensed output of an analog power-control loop. Its wide supply capability and dual-channel configuration permit one channel to monitor a regulated rail while the second provides conditioning or a comparator-style reference function. The 700 kHz gain-bandwidth product is suitable for slow feedback loops rather than high-frequency compensation designs. Confirm the maximum input and output voltages, including any transient excursions, and keep the feedback trace away from power-switching nodes. For designs requiring dedicated undervoltage or overvoltage protection with a defined response time, choose a supervisor rather than a general-purpose amplifier.

خلاصه محصولات پیشنهادی

What is the operating voltage range of LM2904VQDR?
The LM2904VQDR is specified for operation with a maximum supply voltage of 30 V. Texas Instruments describes the LM2904V as a dual, 30 V, 700 kHz operational amplifier with an operating temperature range of -40 °C to 125 °C. Actual usable signal and output ranges remain subject to the common-mode and output-swing limits stated for the selected supply in the manufacturer datasheet.
What are the key specifications of LM2904VQDR that engineers should know?
The LM2904VQDR combines two general-purpose operational-amplifier circuits, a 30 V maximum supply rating, a 700 kHz gain-bandwidth product, and operation from -40 °C to 125 °C in an 8-pin SOIC package. The dual bipolar architecture and wide supply tolerance make it a standard choice for instrumentation, control loops, and signal-conditioning stages that do not require high-speed or low-offset performance.
Where can I download the LM2904VQDR datasheet PDF?
The authoritative LM2904VQDR documentation is available through the Texas Instruments LM2904V product page at https://www.ti.com/product/LM2904V. That page links the device data sheet and ordering information for the LM2904VQDR orderable part. Use the manufacturer copy for pin descriptions, electrical characteristics, recommended operating conditions, and application-circuit details.
Where can I find the LM2904VQDR pinout?
Use the pin-description table and package drawing in the Texas Instruments LM2904V datasheet to assign LM2904VQDR PCB nets. The device is an 8-pin SOIC with two amplifier channels and separate supply pins. The generic SOIC-8 package diagram on this page is provided for footprint orientation only; confirm every signal name against the manufacturer pin table before routing a PCB.
Is LM2904VQDR pin compatible with LM2904BIDR and LM2904BAIDR?
The LM2904VQDR, LM2904BIDR, and LM2904BAIDR belong to the same Texas Instruments dual general-purpose amplifier family and use the same 8-pin SOIC footprint. Their exact offset, bias-current, temperature-range, and qualification specifications determine interchangeability. Confirm those parameters and the required automotive qualification level in the manufacturer documentation before changing the BOM.
What can replace LM2904VQDR as a drop-in amplifier?
Several 8-pin SOIC members of the LM2904 family are pin-compatible alternatives, including LM2904VQD, LM2904BIDR, LM2904BAIDR, and LM2904AVQDR. Cross-brand choices such as LM2904M/NOPB and LM2904YDT also use the same package class. Verify supply voltage, input common-mode range, output swing, offset voltage, noise, and temperature requirements because a shared footprint does not guarantee identical performance.
Is LM2904VQDR the same as LM2904VQD?
LM2904VQDR and LM2904VQD belong to the same Texas Instruments LM2904V family and share the 8-pin SOIC footprint, but the orderable suffixes and temperature grades can differ. Treat LM2904VQD as a board-level alternative only after checking the manufacturer ordering table for electrical rating, temperature grade, qualification, and packaging details relevant to the assembly.
LM2904VQDR vs LM2904M/NOPB - which is better for automotive instrumentation?
LM2904VQDR offers a 30 V supply rating, 700 kHz gain-bandwidth product, and -40 °C to 125 °C operation in an 8-pin SOIC. The onsemi LM2904M/NOPB is also an 8-pin SOIC bipolar dual amplifier, but its specific automotive qualification, offset voltage, bias current, and temperature grade must be checked. Choose the part whose full electrical specification meets the instrumentation requirement.
When should I choose LM2904VQDR over a lower-cost dual op amp?
Choose LM2904VQDR when the design needs a wide supply range, operation up to 125 °C, and a readily identified dual general-purpose amplifier in an 8-pin SOIC. A lower-cost amplifier may be appropriate for lower-temperature, lower-voltage designs with looser offset and bias-current limits. The selection should follow from the supply, signal amplitude, error budget, and qualification requirements.
Is LM2904VQDR suitable for a current-sensing amplifier circuit?
The LM2904VQDR can be used in many current-sensing amplifier designs when its input common-mode voltage, offset voltage, bias current, and output-swing limits suit the shunt arrangement. The 700 kHz gain-bandwidth product supports moderate-bandwidth feedback networks. Verify those electrical limits in the datasheet and include resistor tolerance and shunt tolerance in the overall accuracy budget.
Where to buy LM2904VQDR online?
Use the Request a Quote form on this page to request LM2904VQDR availability, current pricing, order quantities, and a delivery commitment for your assembly. The form is the commercial route for this part and can be used whether the requirement is a single prototype or a production quantity. Provide the required package suffix and quantity with the request.
What is the price of LM2904VQDR?
Current commercial pricing for the LM2904VQDR is handled through the Request a Quote form on this page. Submit the required quantity, target date, and shipment destination to receive a current quotation. Price and inventory can change with volume, market conditions, and packaging requirements, so request the figure for the specific production plan.
What is the lead time for LM2904VQDR?
Request the current lead time for LM2904VQDR through the Request a Quote form on this page. Include your forecast quantities, annual usage, and required delivery dates so the manufacturer or authorized channel can confirm the appropriate schedule. The Texas Instruments product page also provides ordering information and part-status resources for planning purchases.
Is LM2904VQDR in stock?
Submit an LM2904VQDR request through the Request a Quote form on this page to confirm current availability and expected delivery. Because stock levels fluctuate by package suffix and order quantity, request the specific LM2904VQDR configuration and your required production quantity. The form provides a direct route for a current availability response.
How should an unused LM2904VQDR amplifier channel be configured?
Configure the unused channel for stable operation by following the unused-amplifier recommendations in the manufacturer datasheet rather than leaving the inputs floating. A common approach connects the non-inverting input to a defined bias point and the inverting input to the output with feedback. Verify the chosen bias point against the supply and common-mode limits of the device.

داده‌های مرجع مهندسی برای LM2904VQDR — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the LM2904VQDR for general-purpose dual-amplifier designs that require an 8-pin SOIC footprint, operation across -40 °C to 125 °C, and a 30 V supply rating. It is a practical choice for industrial instrumentation, feedback control, sensor interfaces, and low-frequency analog filtering. The LM2904BIDR and LM2904BAIDR are appropriate same-footprint alternatives when a different offset or bias-current grade is preferred; confirm the electrical limits and qualification status for the exact ordering code. LM2904M/NOPB can suit a board with matching supply and pin requirements, but its documented obsolete status makes it less attractive for new production. LM2904YDT provides a cross-brand SOIC-8 option, though bandwidth, noise, offset, and temperature characteristics must be revalidated. For precision measurement, very low offset, rail-to-rail input/output, or high-speed signal chains, select a dedicated precision or high-speed amplifier instead.

مقایسه با جایگزین‌ها

پارامتر این محصول LM2904VQD LM2904BIDR LM2904BAIDR LM2904AVQDR LM2904M/NOPB
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments onsemi
Package 8-pin SOIC 8-pin SOIC - same footprint 8-pin SOIC - same footprint 8-pin SOIC - same footprint 8-pin SOIC - same footprint 8-pin SOIC - same footprint
Number of Channels 2 2 2 2 2 2

تفاوت‌های کلیدی

  • Wide operating temperature range (در مقابلLM2904M/NOPB)
  • Consistent 700 kHz gain-bandwidth product within the LM2904V family (در مقابلLM2904M/NOPB)
  • Dual amplifier in a standard 8-pin SOIC footprint (در مقابلLM2904YDT)
  • Active lifecycle family with 30 V supply capability (در مقابلLM2904M/NOPB)

یادداشت‌های طراحی

Place the supply-bypass capacitor immediately across the amplifier's supply and ground pins, with a short and low-impedance connection to the ground plane. Route the non-inverting and inverting inputs away from switching nodes, clocks, and high-current return paths. Because both amplifier channels share one package, each channel should have independent local feedback components and its own short feedback route to minimize channel-to-channel coupling.

Do not treat the 30 V supply rating as the permissible input or output voltage. Verify the input common-mode range, output swing, and maximum differential input voltage for the selected supply in the manufacturer datasheet. When using a single supply, provide a bias reference inside the usable common-mode range, and configure an unused channel according to the manufacturer's stable-input recommendations instead of leaving its inputs floating.

The 700 kHz gain-bandwidth product requires closed-loop gain and feedback capacitance to be selected together. Check the gain-bandwidth and phase-margin guidance before using high noise gain. For capacitive or long-line loads, place a small isolation resistor directly at the output and keep the external feedback network compact. Validate stability at the minimum supply voltage, maximum temperature, and highest intended output load.

The 30 V capability does not guarantee low power dissipation in every circuit. Estimated: power dissipation is approximately (VS times quiescent current) plus (VS minus VOUT) times output current, excluding load-related losses. Use the datasheet quiescent-current and output-current limits for the selected grade, then calculate junction temperature with the SOIC thermal-resistance data for the actual PCB copper area.

اطلاعات انطباق

RoHS
Compliant
REACH
Compliant
AEC-Q100
Unknown
بدون سرب
Yes
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

RoHS, Pb-free, REACH, MSL 1, and 260 °C reflow information are stated for the LM2904 family. AEC-Q100 status and halogen-free status are not explicitly stated for this orderable part.

تاریخ تأیید داده‌ها: 2026-11-17 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

LM2904VQDR LM2904VQDR datasheet LM2904VQDR datasheet pdf LM2904VQDR pinout LM2904VQDR schematic LM2904VQDR equivalent LM2904VQDR replacement LM2904VQDR cross reference LM2904VQDR vs LM2904M/NOPB LM2904VQDR price LM2904VQDR stock Texas Instruments LM2904VQDR LM2904 8-SOIC dual op amp LM2904 industrial sensor amplifier

قطعات و اصطلاحات مرتبط

Texas Instruments LM2904VQDR LM2904VQD LM2904BIDR LM2904BAIDR LM2904AVQDR LM2904M/NOPB LM2904YDT operational amplifier dual amplifier general-purpose amplifier bipolar voltage-feedback amplifier signal-conditioning IC analog semiconductor 700 kHz gain-bandwidth product 30 V maximum supply voltage SOIC-8 surface-mount package industrial instrumentation automotive electronics current-to-voltage conversion feedback control loop RoHS REACH MSL 1
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ