MC9S08GT8AMFCE - HCS08 8-bit MCU, 8KB Flash, 40MHz, QFN-32 | NXP
MPN: MC9S08GT8AMFCE ✗ پایان تولیدMC9S08GT8AMFCE نمای کلی
An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, Flash program memory, and peripherals such as timers, ADCs, and communication interfaces. The MC9S08GT8AMFCE belongs to the broader MCU hierarchy of microcontroller -> 8-bit MCU -> S08 family -> S08GT series -> power-efficient general-purpose class. The HCS08 core is an enhanced evolution of the legacy HC08 instruction set, adding the BGND instruction for background debugging while maintaining full source-level compatibility with HC08 code. This combination of instruction-set familiarity and modern features makes the S08GT family a popular choice for cost-sensitive upgrades of legacy HC08 designs.
Key features include 8 KB Flash program memory, 1 KB RAM, an internal clock generator, multiple timer/PWM modules, an analog comparator, and a 10-channel 10-bit ADC. The device supports up to 32 interrupt/reset sources and offers a low-power wait and stop mode set for battery-friendly operation. The HCS08 core executes most instructions in one to two bus cycles, contributing to its energy-efficient throughput at 40 MHz.
The device integrates the HCS08 CPU with a fast Flash controller, supporting in-application programming and security features to protect firmware IP. Its on-chip debug interface (background debug mode, BDM) allows non-intrusive in-circuit development without requiring a bond-out emulator, reducing tooling cost for engineers and shortening time-to-prototype.
Typical applications include home appliances, motor control for small brushed DC and BLDC systems, security and alarm panels, industrial sensor interface boards, and consumer white goods such as washing machines and dishwashers. Its combination of low cost, robust I/O count, and integrated analog peripherals makes it well suited for mixed-signal front-end designs that need MCU control alongside signal conditioning.
When designing with this device, allocate the QFN exposed pad to a continuous ground plane with multiple thermal vias to ensure proper heat dissipation and low-impedance ground reference. Verify that the chosen debugger supports the BDM protocol and plan the BGND/PTA4 pin routing early to avoid rework on a dense PCB.
This page synthesizes distributor stock data, datasheet-verified specifications, and drop-in alternatives so engineers can make sourcing decisions without bouncing across DigiKey, Mouser, and the NXP product page. The NXP End-of-Life notice flagged on the official product page should be reviewed against your design's longevity requirements before committing to volume production.
جایگزین‌های drop-in برای MC9S08GT8AMFCE — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای MC9S08GT8AMFCE (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Connectivity, Instruction Set, Program Memory Size, Temperature Grade.
MC9S08GT8ACFCE
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←MC9S08GT16AMFCE
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←MC9S08GT16ACFCE
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←MC9S08GT8ACBCE
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
MC9S08GT8AMFCE حداکثر مقادیر مجاز و مشخصات الکتریکی
| Core | HCS08 (enhanced S08) |
| Instruction Set | HC08 + BGND instruction |
| Maximum CPU Frequency | 40 MHz |
| Program Memory (Flash) | 8 KB |
| RAM | 1 KB |
| ولتاژ تغذیه | 1.8 V to 3.6 V |
| I/O Pins | 34 (maximum, package-dependent) |
| ADC | 10-bit, multi-channel |
| بسته‌بندی | 32-pin QFN with exposed pad |
| نوع نصب | Surface Mount |
| Interrupt Sources | Up to 32 |
| Debug Interface | Background Debug Mode (BDM) |
| وضعیت RoHS | Compliant |
| Lead-Free | Yes |
پیکربندی پین MC9S08GT8AMFCE
| پین 1 | PTA0/KBIP0/TCLK0 — General I/O, keyboard interrupt, timer channel |
| پین 2 | PTA1/KBIP1/TCLK1 — General I/O, keyboard interrupt, timer channel |
| پین 3 | PTA2/KBIP2 — General I/O, keyboard interrupt |
| پین 4 | PTA3/KBIP3 — General I/O, keyboard interrupt |
| پین 5 | PTA4/KBIP4/ACMPO/BKGD — General I/O, BKGD/MS for BDM debug |
| پین 6 | PTA5/KBIP5/ACMP+ — General I/O, analog comparator input |
| پین 7 | PTA6/KBIP6/ACMP- — General I/O, analog comparator input |
| پین 8 | PTA7/KBIP7 — General I/O, keyboard interrupt |
| پین 9 | VSS — Ground reference |
| پین 10 | VDD — Supply voltage (1.8 V to 3.6 V) |
| پین 11 | PTB0/SDA — I2C SDA or general I/O |
| پین 12 | PTB1/SCL — I2C SCL or general I/O |
| پین 13 | PTB2/MISO — SPI MISO or general I/O |
| پین 14 | PTB3/MOSI — SPI MOSI or general I/O |
| پین 15 | PTB4/SPSCK — SPI clock or general I/O |
| پین 16 | PTB5/SS — SPI slave select or general I/O |
| پین 17 | PTB6/TxD — UART transmit or general I/O |
| پین 18 | PTB7/RxD — UART receive or general I/O |
| پین 19 | PTC0/ADP0 — ADC channel 0 or general I/O |
| پین 20 | PTC1/ADP1 — ADC channel 1 or general I/O |
| پین 21 | PTC2/ADP2 — ADC channel 2 or general I/O |
| پین 22 | PTC3/ADP3 — ADC channel 3 or general I/O |
| پین 23 | PTC4/ADP4 — ADC channel 4 or general I/O |
| پین 24 | PTC5/ADP5 — ADC channel 5 or general I/O |
| پین 25 | PTC6/ADP6 — ADC channel 6 or general I/O |
| پین 26 | PTC7/ADP7 — ADC channel 7 or general I/O |
| پین 27 | PTD0/RESET — Reset input or general I/O |
| پین 28 | PTD1/IRQ — External interrupt or general I/O |
| پین 29 | PTD2 — General I/O |
| پین 30 | PTD3 — General I/O |
| پین 31 | VSS — Ground (second ground pin) |
| پین 32 | VDD — Supply voltage (second power pin) |
| پین EP | Exposed Pad — Thermal pad, must be soldered to ground plane |
کاربردهای معمول
MC9S08GT8AMFCE مناسب است برای 6 کاربردs: Home Appliance Control Board, Small BLDC / Brushed DC Motor Control, Security and Alarm Panel, Industrial Sensor Interface Board, Consumer White Goods User Interface, Battery-Powered Sensor Edge Node.
Home Appliance Control Board
The MC9S08GT8AMFCE fits home-appliance main control boards thanks to its 8 KB Flash and 34 I/O pins, which is enough headroom for a user-interface keypad, an LED or LCD indicator driver, and a triac interface for heater or pump loads. With a 1.8-3.6 V supply, the MCU is directly compatible with 3.3 V logic-level triac optocouplers, and the on-chip 10-bit ADC is suitable for reading NTC temperature sensors used in ovens, refrigerators, and dishwashers.
پیشنهادی
Small BLDC / Brushed DC Motor Control
For small brushless or brushed DC motor control, the MC9S08GT8AMFCE delivers 40 MHz HCS08 throughput, multi-channel PWM-capable timers, and software-selectable pull-ups on its I/O. The 8 KB Flash is sufficient to host a sensorless or Hall-sensor trapezoidal commutation state machine, while the 1 KB RAM handles modest speed-loop state variables. Its QFN package and exposed pad aid thermal dissipation during high-current switching.
پیشنهادی
Security and Alarm Panel
The MC9S08GT8AMFCE suits wired security panels with its 34 I/O supporting multiple sensor zones, keypads, and sirens, while BDM background-debug enables in-circuit firmware upgrades during installation. The low-power wait and stop modes help meet quiescent-current budgets for always-on battery-backed panels. On-chip Flash security bits protect the alarm protocol stack from unauthorized readout.
پیشنهادی
Industrial Sensor Interface Board
The MC9S08GT8AMFCE operates over -40C to +85C industrial temperatures and 1.8-3.6 V supply, which is a comfortable range for 4-20 mA loop-powered sensor boards. Its on-chip 10-bit ADC plus analog comparator perform local signal conditioning before relaying digitized values over UART, SPI, or I2C to a larger controller. The QFN-32 footprint keeps PCB area minimal for dense DIN-rail mounted modules.
پیشنهادی
Consumer White Goods User Interface
Washing-machine, dishwasher, and microwave UI boards benefit from the MC9S08GT8AMFCE's mix of I/O pins for capacitive touch or matrix keypads, PWM outputs for buzzer tone generation, and 8 KB Flash for menu-driven state machines. The 1.8 V minimum supply enables direct Li-ion battery support for portable countertop appliances. QFN-32 footprint supports compact UI daughterboards.
پیشنهادی
Battery-Powered Sensor Edge Node
For battery-powered edge nodes such as wireless HVAC sensors or smart-home leak detectors, the MC9S08GT8AMFCE provides HCS08 throughput with low-power wait and stop modes to stretch battery life. Its 34 I/O accommodate multiple sensor inputs and a sub-GHz or BLE module interface, while the small QFN-32 footprint allows tight board integration inside sensor housings.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای MC9S08GT8AMFCE — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | MC9S08GT8ACFCE | MC9S08GT16AMFCE | MC9S08GT16ACFCE | MC9S08GT8ACBCE |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 32-QFN with exposed pad | 32-QFN with exposed pad - same | 32-QFN with exposed pad - same | 32-QFN with exposed pad - same | 32-QFN with exposed pad - same |
| Core | HCS08 (enhanced S08) | HCS08 | HCS08 | HCS08 | HCS08 |
| Maximum CPU Frequency | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| Program Flash | 8 KB | 8 KB | 16 KB (+100%) | 16 KB (+100%) | 8 KB |
| RAM | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB |
| Supply Voltage | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| I/O Pins | 34 | 34 | 34 | 34 | 34 |
| Debug Interface | BDM (background debug mode) | BDM | BDM | BDM | BDM |
تفاوت‌های کلیدی
- Balanced Flash/RAM footprint in a compact QFN-32 (در مقابلMC9S08GT16AMFCE)
- Mature HCS08 toolchain with BDM debug (در مقابلMC9S08QB8CGK)
- Pin-compatible upgrade path within the S08GT family (در مقابلMC9S08GT8ACFCE)
یادداشت‌های طراحی
The 32-pin QFN package includes an exposed thermal pad (EP) that must be soldered to the ground plane for mechanical robustness and thermal dissipation. Recommended: place at least 9 thermal vias in the EP land pattern to conduct heat into inner ground layers. Failing to solder the EP can cause intermittent failures under thermal cycling.
Route the BKGD/MS pin (PTA4) early in PCB layout to keep the BDM debug header accessible. Keep the trace short and avoid routing high-frequency signals adjacent to the BKGD line to prevent debug-session corruption. Decouple VDD with a 100 nF ceramic capacitor within 5 mm of each VDD pin plus a bulk 4.7 uF tantalum.
Do not exceed the maximum supply voltage of 3.6 V (the absolute maximum is 4.0 V with risk of permanent damage). The reset pin (PTD0/RESET) requires an external pull-up when not driven by the BDM tool - omitting this pull-up causes the MCU to remain in reset after programming. The internal bandgap reference must be enabled before ADC conversions for accurate absolute-voltage readings.
For battery-powered designs, leverage the S08 low-power wait and stop modes; configure unused peripherals to their lowest-power state and gate the clock to unused modules via the SCGC register family. Wake-up from stop mode can be triggered by the keyboard interrupt module or the analog comparator, allowing event-driven operation at sub-10 uA average current.
اطلاعات انطباق
RoHS and lead-free confirmed per NXP product page. AEC-Q100 not applicable for general-purpose 8-bit MCU. Conflict minerals compliance per NXP corporate statement. Halogen-free status not stated in provided data.
