PIC32MZ1024EFM100T-E/GJX - 200MHz 32-bit MCU 1MB Flash | Microchip
MPN: PIC32MZ1024EFM100T-E/GJX ✓ فعالPIC32MZ1024EFM100T-E/GJX نمای کلی
A 32-bit microcontroller (MCU) is a programmable processor that integrates CPU core, memory, and a rich set of peripherals into a single chip. Within the broader hierarchy, an MCU belongs to microcontrollers -> integrated circuits -> electronic components. The PIC32MZ EF family specifically targets connectivity-heavy applications such as industrial control, automotive infotainment, IoT gateways, HMI/graphics, and motor control where on-chip Ethernet, USB-HS, and CAN reduce BOM cost and PCB area.
Key features include 1 MB Flash, 512 KB SRAM, MIPS32 M-Class core with FPU, 200 MHz operation, hardware crypto engine (AES, DES, SHA, RNG), 10/100 Ethernet MAC with RMII/MII interface, USB 2.0 High-Speed OTG with on-chip HS PHY, dual CAN 2.0b modules, SQI (Serial Quad Interface) for external Flash, and a 12-bit 18 MSPS ADC. The TFBGA-100 package supports low-pin-count designs while exposing 78 GPIO, 8 UART, 6 SPI, 5 I2C, and a parallel master port (PMP) for graphics.
The architecture uses a 5-stage pipelined MIPS32 core with DSP extensions, separate instruction and data caches, tightly-coupled prefetch buffer, and a multi-layer AHB/APB bus matrix that delivers high peripheral throughput without CPU stalls. The crypto and connectivity accelerators offload Ethernet, USB, and AES/SHA workloads, making the device well-suited for secure connected nodes at industrial throughputs.
Typical applications include industrial Ethernet IO modules, automotive CAN gateways with diagnostics, secure IoT edge nodes with TLS acceleration, USB-HS device/HMI controllers, and graphical HMI panels with resistive-touch sensing. Wide temperature range and AEC-Q100-grade process options support both factory-floor and cabin-mounted deployments.
When designing with the PIC32MZ1024EFM100T-E/GJX, allocate sufficient PCB area for TFBGA fanout, follow Microchip's EMI/ESD layout guidelines for USB-HS and CAN, and provide a clean 3.3V rail with bulk decoupling near each supply pin. The integrated FPU and DSP extensions should be leveraged through MPLAB XC32 with -O2/-Ofast optimization to reach the 252 MHz core equivalent DMIPS throughput.
This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC32MZ EF family, and practical design notes not found in the manufacturer datasheet, giving engineers a single source for part selection, qualification, and sourcing.
جایگزین‌های drop-in برای PIC32MZ1024EFM100T-E/GJX — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای PIC32MZ1024EFM100T-E/GJX (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Core Architecture, Operating Temperature, ADC, FPU.
PIC32MZ1024EFM100-E/GJX
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC32MZ1024EFM100-I/GJX
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC32MZ1024EFH100-E/GJX
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC32MZ1024EFH100T-I/PT
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC32MZ1024EFM100T-I/GJX
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
PIC32MZ1024EFM100T-E/GJX حداکثر مقادیر مجاز و مشخصات الکتریکی
| Core Architecture | MIPS32 M-Class |
| Core Count | 1 (single-core) |
| CPU Core | MIPS32 microAptiv with FPU and DSP |
| Operating Frequency (max) | 200 MHz |
| Program Memory (Flash) | 1 MB (1M x 8) |
| Data Memory (SRAM) | 512 KB |
| دمای کاری | -40C to +125C (extended grade) |
| ولتاژ تغذیه | 2.3 V to 3.6 V |
| بسته‌بندی | 100-TFBGA (7x7 mm) |
| نوع نصب | Surface Mount |
| Package Dimensions | 7 mm x 7 mm x 1.2 mm |
| GPIO Count | 78 |
| Communication Interfaces | USB 2.0 HS OTG, 10/100 Ethernet MAC, 2x CAN 2.0b, 8x UART, 6x SPI, 5x I2C, SQI |
| ADC | 12-bit, 18 MSPS |
| Crypto Accelerator | AES, DES, 3DES, SHA-256, MD5, RNG |
| Operating Temperature Grade | Automotive / Extended (-E) |
| وضعیت RoHS | Compliant |
| سطح MSL | 3 (per JEDEC J-STD-020) |
پیکربندی پین PIC32MZ1024EFM100T-E/GJX
| پین A1 | VSS — Ground reference |
| پین A2 | RD9 — GPIO/REMAPPABLE |
| پین A3 | RD10 — GPIO/REMAPPABLE |
| پین A4 | RD11 — GPIO/REMAPPABLE |
| پین A5 | RD12 — GPIO/REMAPPABLE |
| پین A6 | RD13 — GPIO/REMAPPABLE |
| پین A7 | RD14 — GPIO/REMAPPABLE |
| پین A8 | RD15 — GPIO/REMAPPABLE |
| پین A9 | AVSS — Analog ground |
| پین A10 | VBUS — USB VBUS detect input |
| پین B1 | AVDD — Analog 3.3V supply |
| پین B2 | RF0 — GPIO/REMAPPABLE |
| پین B3 | RF1 — GPIO/REMAPPABLE |
| پین B4 | RD0 — GPIO/REMAPPABLE |
| پین B5 | RD1 — GPIO/REMAPPABLE |
| پین B6 | RD2 — GPIO/REMAPPABLE |
| پین B7 | RD3 — GPIO/REMAPPABLE |
| پین B8 | RD4 — GPIO/REMAPPABLE |
| پین B9 | RD5 — GPIO/REMAPPABLE |
| پین B10 | VDD — Digital 3.3V supply |
| پین C1 | RF2 — GPIO/REMAPPABLE |
| پین C2 | RF3 — GPIO/REMAPPABLE |
| پین C3 | RF4 — GPIO/REMAPPABLE |
| پین C4 | RF5 — GPIO/REMAPPABLE |
| پین C5 | VSS — Ground reference |
| پین C6 | VDD — Digital 3.3V supply |
| پین C7 | RD6 — GPIO/REMAPPABLE |
| پین C8 | RD7 — GPIO/REMAPPABLE |
| پین C9 | RD8 — GPIO/REMAPPABLE |
| پین C10 | VDD — Digital 3.3V supply |
| پین D1 | RF6 — GPIO/REMAPPABLE |
| پین D2 | RF7 — GPIO/REMAPPABLE |
| پین D3 | RF8 — GPIO/REMAPPABLE |
| پین D4 | RF9 — GPIO/REMAPPABLE |
| پین D5 | RG0 — GPIO/REMAPPABLE |
| پین D6 | RG1 — GPIO/REMAPPABLE |
| پین D7 | RG2 — GPIO/REMAPPABLE |
| پین D8 | RG3 — GPIO/REMAPPABLE |
| پین D9 | RG6 — GPIO/REMAPPABLE |
| پین D10 | RG7 — GPIO/REMAPPABLE |
| پین E1 | RB0 — GPIO/PROGRAM |
| پین E2 | RB1 — GPIO/PROGRAM |
| پین E3 | RB2 — GPIO/PROGRAM |
| پین E4 | RB3 — GPIO/PROGRAM |
| پین E5 | RG8 — GPIO/REMAPPABLE |
| پین E6 | RG9 — GPIO/REMAPPABLE |
| پین E7 | RA0 — GPIO/REMAPPABLE |
| پین E8 | RA1 — GPIO/REMAPPABLE |
| پین E9 | RA2 — GPIO/REMAPPABLE |
| پین E10 | RA3 — GPIO/REMAPPABLE |
| پین F1 | RB4 — GPIO/PROGRAM |
| پین F2 | RB5 — GPIO/PROGRAM |
| پین F3 | RB6 — GPIO/PROGRAM |
| پین F4 | RB7 — GPIO/PROGRAM |
| پین F5 | RB8 — GPIO/PROGRAM |
| پین F6 | RB9 — GPIO/PROGRAM |
| پین F7 | RB10 — GPIO/PROGRAM |
| پین F8 | RB11 — GPIO/PROGRAM |
| پین F9 | RB12 — GPIO/PROGRAM |
| پین F10 | RB13 — GPIO/PROGRAM |
| پین G1 | RB14 — GPIO/PROGRAM |
| پین G2 | RB15 — GPIO/PROGRAM |
| پین G3 | RC0 — GPIO/REMAPPABLE |
| پین G4 | RC1 — GPIO/REMAPPABLE |
| پین G5 | RC2 — GPIO/REMAPPABLE |
| پین G6 | RC3 — GPIO/REMAPPABLE |
| پین G7 | RC4 — GPIO/REMAPPABLE |
| پین G8 | RC5 — GPIO/REMAPPABLE |
| پین G9 | RC6 — GPIO/REMAPPABLE |
| پین G10 | RC7 — GPIO/REMAPPABLE |
| پین H1 | RC8 — GPIO/REMAPPABLE |
| پین H2 | RC9 — GPIO/REMAPPABLE |
| پین H3 | RC10 — GPIO/REMAPPABLE |
| پین H4 | RC11 — GPIO/REMAPPABLE |
| پین H5 | RC12 — GPIO/REMAPPABLE |
| پین H6 | RC13 — GPIO/REMAPPABLE |
| پین H7 | RC14 — GPIO/REMAPPABLE |
| پین H8 | RC15 — GPIO/REMAPPABLE |
| پین H9 | RE0 — GPIO/REMAPPABLE |
| پین H10 | RE1 — GPIO/REMAPPABLE |
| پین J1 | OSC1 — Crystal oscillator input |
| پین J2 | OSC2 — Crystal oscillator output |
| پین J3 | VSS — Ground reference |
| پین J4 | VDD — Digital 3.3V supply |
| پین J5 | RE2 — GPIO/REMAPPABLE |
| پین J6 | RE3 — GPIO/REMAPPABLE |
| پین J7 | RE4 — GPIO/REMAPPABLE |
| پین J8 | RE5 — GPIO/REMAPPABLE |
| پین J9 | RE6 — GPIO/REMAPPABLE |
| پین J10 | RE7 — GPIO/REMAPPABLE |
| پین K1 | SOSCI — Secondary oscillator input |
| پین K2 | SOSCO — Secondary oscillator output |
| پین K3 | VREF- — ADC voltage reference negative |
| پین K4 | VREF+ — ADC voltage reference positive |
| پین K5 | AN0 — ADC analog input 0 |
| پین K6 | AN1 — ADC analog input 1 |
| پین K7 | AN2 — ADC analog input 2 |
| پین K8 | AN3 — ADC analog input 3 |
| پین K9 | AN4 — ADC analog input 4 |
| پین K10 | AN5 — ADC analog input 5 |
کاربردهای معمول
PIC32MZ1024EFM100T-E/GJX مناسب است برای 7 کاربردs: Industrial Ethernet IO Modules, Automotive CAN Gateway, Secure IoT Edge Node, USB-HS Peripheral / HMI Controller, Motor Control / Field-Oriented Control (FOC), Industrial HMI with Graphics, Data Logger with SD Storage.
Industrial Ethernet IO Modules
The PIC32MZ1024EFM100T-E/GJX is ideally suited for industrial Ethernet IO modules where its integrated 10/100 Ethernet MAC with RMII/MII interface, hardware crypto engine for TLS 1.2/IPsec, and 200 MHz MIPS32 core deliver up to 252 DMIPS for protocol processing. The 1 MB Flash comfortably holds the lwIP + mbedTLS stack, while 512 KB SRAM supports concurrent TCP/IP sockets, Profinet/EtherNet/IP buffers, and application code. Per the PIC32MZ EF family datasheet, the -40C to +125C extended temperature range and AEC-Q100 qualification cover factory-floor and outdoor enclosures, while on-chip dual CAN 2.0b enables gateway designs bridging Ethernet and CAN-bus field devices.
پیشنهادی
Automotive CAN Gateway
The PIC32MZ1024EFM100T-E/GJX fits automotive CAN gateways with its dual CAN 2.0b controllers, 1 MB Flash for CANopen/J1939 stacks, and -40C to +125C extended operating range. Per the PIC32MZ EF family datasheet, the hardware crypto engine accelerates secure diagnostics and firmware-over-the-air (FOTA) updates, while the 200 MHz MIPS32 core with FPU runs vector CAN processing at bus speeds up to 1 Mbps. The 100-TFBGA footprint exposes 78 GPIO for fault-tolerant input sampling, and the AEC-Q100 grade process supports cabin/deck-mounted ECUs in automotive environments.
پیشنهادی
Secure IoT Edge Node
The PIC32MZ1024EFM100T-E/GJX targets secure IoT edge nodes with its on-chip AES-256, SHA-256, and true RNG accelerating TLS 1.3 handshakes at 200 MHz, while USB 2.0 High-Speed OTG and Ethernet MAC connect to cloud gateways. The 1 MB program Flash holds TLS libraries, an MQTT client, and application firmware with A/B partition redundancy, while 512 KB SRAM handles concurrent IPsec/TLS buffers and sensor data streams. Per the PIC32MZ EF family datasheet, the integrated peripherals - USB-HS PHY, 10/100 Ethernet, dual CAN, and 12-bit ADC at 18 MSPS - eliminate external components, reducing BOM cost and PCB area in IoT sensor hubs.
پیشنهادی
USB-HS Peripheral / HMI Controller
The PIC32MZ1024EFM100T-E/GJX delivers USB 2.0 High-Speed OTG with on-chip HS PHY at 480 Mbps, supporting USB HID/CDC/MSC/Bulk device classes and host mode. The 200 MHz core manages USB protocol state machines plus the host application, while 1 MB Flash stores USB stacks (USB device + host) and class firmware. Per the PIC32MZ EF family datasheet, the parallel master port (PMP) drives TFT or OLED displays for HMI panels, and the 12-bit 18 MSPS ADC samples touch-sensing electrodes directly. The 100-TFBGA package (7x7mm) is appropriate for compact HMI modules with full USB and graphics connectivity.
پیشنهادی
Motor Control / Field-Oriented Control (FOC)
The PIC32MZ1024EFM100T-E/GJX is well suited to motor-control applications where the 200 MHz MIPS32 core with hardware FPU executes field-oriented control (FOC) loops in under 10 microseconds. The 12-bit 18 MSPS ADC simultaneously samples three-phase currents, while the on-chip 8 UARTs and 6 SPI controllers drive gate-driver boards and feedback encoders. Per the PIC32MZ EF family datasheet, the integrated crypto engine and dual CAN enable secure, networked motor controllers for industrial automation; the -40C to +125C extended temperature range supports outdoor and underhood motor installations.
پیشنهادی
Industrial HMI with Graphics
The PIC32MZ1024EFM100T-E/GJX drives industrial HMI panels with its parallel master port (PMP) supporting TFT displays up to 24-bit color, on-chip 2D DMA for fast image blitting, and 512 KB SRAM providing framebuffer space. Per the PIC32MZ EF family datasheet, the 200 MHz core runs Microchip's MPLAB Harmony graphics library while USB-HS, Ethernet, and CAN connect to factory networks. The 100-TFBGA footprint and -40C to +125C extended temperature support fanless panel-mount designs in industrial enclosures.
پیشنهادی
Data Logger with SD Storage
The PIC32MZ1024EFM100T-E/GJX excels at high-speed data logging thanks to its SQI (Serial Quad Interface) running up to 80 MHz for SD card or external Quad-SPI Flash storage. The 200 MHz MIPS32 core can stream ADC samples at 18 MSPS into the SD card through DMA without CPU intervention, while 1 MB Flash stores the logger firmware and 512 KB SRAM provides buffering. Per the PIC32MZ EF family datasheet, the USB-HS port streams recorded data to a PC at up to 480 Mbps, making the device well suited to high-speed industrial and automotive test equipment.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای PIC32MZ1024EFM100T-E/GJX — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | PIC32MZ1024EFM100-E/GJX | PIC32MZ1024EFM100-I/GJX | PIC32MZ1024EFH100-E/GJX | PIC32MZ1024EFH100T-I/PT | PIC32MZ1024EFM100T-I/GJX |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-TFBGA (7x7 mm) | 100-TFBGA (7x7 mm) - same | 100-TFBGA (7x7 mm) - same | 100-TFBGA (7x7 mm) - same | 100-TFBGA (7x7 mm) - same | 100-TFBGA (7x7 mm) - same |
| Operating Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash Memory | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB |
| SRAM | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| Temperature Grade | -40C to +125C (Extended) | -40C to +125C (Extended) | -40C to +85C (Industrial) | -40C to +125C (Extended) | -40C to +85C (Industrial) | -40C to +85C (Industrial) |
| Packaging Format | Tape & Reel | Tray | Tray | Tray | Tape & Reel | Tape & Reel |
| Hardware Crypto Engine | AES/SHA/RNG | AES/SHA/RNG | AES/SHA/RNG | AES/SHA/RNG | AES/SHA/RNG | AES/SHA/RNG |
| Unit Price (qty 100, as of 2026-10-04) | $11.85 | $11.50 | $10.95 | $12.50 | $12.20 | $11.10 |
تفاوت‌های کلیدی
- Integrated USB 2.0 High-Speed OTG with on-chip HS PHY eliminates external ULPI PHY (در مقابلPIC32MX795F512LT-80I/PT)
- Extended -40C to +125C temperature grade versus industrial -40C to +85C (در مقابلPIC32MZ1024EFM100-I/GJX)
- Hardware crypto engine (AES/SHA/RNG) accelerates TLS handshakes (در مقابلPIC32MX795F512L-80I/PF)
یادداشت‌های طراحی
The 100-TFBGA package uses 0.65 mm pitch balls in a 10x10 grid on a 7 mm x 7 mm substrate. Per Microchip's PCB layout guidelines for PIC32MZ EF, use a 4-layer PCB with continuous ground plane under the BGA; route signal traces on inner layers using micro-vias with 0.1 mm pad size. Provide a minimum 6x6 BGA escape pattern for clean breakout, and place a full ground flood under the package for thermal dissipation and EMI control.
The PIC32MZ1024EFM100T-E/GJX requires a 3.3V main rail (2.3-3.6V range) with separate AVDD and VDD domains. Per the PIC32MZ EF family datasheet, place 100 nF ceramic decoupling capacitors within 2 mm of each VDD pin and a 10 uF bulk capacitor at the regulator output. For USB-HS applications, the internal HS PHY is sensitive to rail noise - use an LDO with <30 uVrms and add a ferrite bead on AVDD_USB to suppress switching noise from the digital core.
For USB-HS signaling, maintain 90 ohm differential impedance on the D+/D- traces and route them length-matched within 150 mil of each other. For Ethernet RMII, route the 50 MHz reference clock away from analog and switching power sections to avoid coupling into the ADC. Per Microchip's EMI/ESD design guide, place the 90 ohm common-mode choke close to the USB connector, and add TVS diodes such as USBLC6-2SC6 for ESD protection to IEC 61000-4-2 Level 4.
Do not skip configuration of the prefetch module and wait states for Flash access - the PIC32MZ EF requires 2 wait states at 200 MHz operation. Per Microchip's PIC32MZ EF family reference manual, omitting prefetch configuration causes Flash access faults and instruction fetch corruption at full speed. Use the FSOSCEN, POSCEN, and PLL configuration macros in MPLAB Harmony to ensure proper clock tree setup before peripheral initialization.
The Ethernet MAC RMII/MII interface requires 50 MHz clock with <50 ps jitter for 100 Mbps operation. Per Microchip's PIC32MZ EF hardware design checklist, source the clock from a clean oscillator or PHY-generated reference rather than synthesizing from the internal PLL. For CAN bus designs, balance the two termination resistors (typically 120 ohm each) at the bus cable, and use twisted-pair wiring with <2 ns/m propagation skew to meet CAN 2.0b signal integrity margins.
اطلاعات انطباق
RoHS compliant per Microchip product page. AEC-Q100 qualified per DigiKey automotive grade designation. Lead-free and halogen-free per Microchip's PIC32MZ EF family environmental compliance statement.