Texas Instruments

TUSB1105RGTR - USB 2.0 Transceiver | Texas Instruments

MPN: TUSB1105RGTR ✓ فعال
16-pin VQFN Package 12 Mbit/s Speed
حداقل سفارش: 1 |

TUSB1105RGTR نمای کلی

Texas Instruments TUSB1105RGTR is a single-channel USB 2.0 transceiver for full-speed and low-speed signaling, supporting 12 Mbit/s and 1.5 Mbit/s data rates in a 16-pin VQFN package measuring 3 mm by 3 mm. The device provides one transceiver path, integrates transmit and receive functions, and is designed for compact USB interface implementations.

A universal serial bus transceiver is an interface circuit that converts logic-level data into USB-compatible differential signaling and converts received differential signals back into digital logic. The TUSB1105 belongs to the USB interface IC hierarchy, where USB transceivers connect a host, peripheral, or embedded controller to a USB connector while providing the physical-layer signaling required by USB 2.0 devices.

The principal features include compliance with the Universal Serial Bus Specification Revision 2.0, full-speed operation at 12 Mbit/s, low-speed operation at 1.5 Mbit/s, and a half-duplex 1/1 transceiver configuration. Its 16-VQFN package is 3 mm by 3 mm, making the device suitable for space-constrained portable, industrial, and embedded USB equipment. The exposed-pad package also supports compact PCB layouts when its land pattern and thermal design are implemented correctly.

The TUSB1105 is intended for external USB connectivity rather than direct USB data signaling across a long cable or printed circuit board. Its transmit and receive path handles the USB differential interface, while the connected USB controller or embedded processor performs protocol handling. This division keeps low-level signaling separate from the higher layers of USB enumeration, descriptors, classes, and transfers.

Typical uses include USB-to-serial adapters, portable test and measurement equipment, industrial control panels, data-collection terminals, and accessory controllers that need a compact full-speed or low-speed USB interface. For designs that expose a USB Type-A or USB Type-B receptacle, the transceiver should be paired with the appropriate connector, protection network, routing geometry, and controller-specific interface requirements.

PCB implementation requires careful treatment of the differential USB pair, the exposed ground pad, and the short connection between the transceiver and connector. Maintain a continuous ground reference, route D+ and D+ together and D− and D− together, and minimize stubs and unnecessary vias. Confirm the final layout against the pin-description and layout guidance in the manufacturer datasheet.

This page combines the confirmed USB 2.0 speed ratings, package information, drop-in replacement findings, interface-selection guidance, and practical PCB considerations into a compact engineering reference for USB transceiver designs.

جایگزین‌های drop-in برای TUSB1105RGTR — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای TUSB1105RGTR (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Product Type.

Texas Instruments
Package: 16-WQFN (RTZ), 3 x 3 mm
Product Type: Half-speed USB 2.0 transceiver
مقایسه با TUSB1105RGTR →

TUSB1106RTZR

✅ جایگزین مستقیم
Texas Instruments
📦 16-pin VQFN
Half-speed USB 2.0 transceiver · Universal Serial Bus Specification Revision 2.0 · 12 Mbit/s · 1.5 Mbit/s · 1 · 1 · 3.3 V bypassable voltage regulator · USB VBUS

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

TUSB1105RTZR

✅ جایگزین مستقیم
📦 16-pin VQFN
Related TUSB1105 orderable variant in the compatible 16-pin family; verify suffix-specific temperature, packing, and lifecycle differences.

📋 جایگزین مرجع (خارج از کاتالوگ)

TUSB1105RGTR مشخصات

Product Type Universal Serial Bus transceiver
USB Specification Compliance Universal Serial Bus Specification Revision 2.0
Transceiver Configuration 1/1 half-duplex transceiver
Full-Speed Data Rate 12 Mbit/s
Low-Speed Data Rate 1.5 Mbit/s
Number of Channels 1 channel
بسته‌بندی 16-pin VQFN
Package Dimensions 3 mm x 3 mm
نوع نصب Surface mount

راهنمای پیکربندی پین TUSB1105RGTR 3 mm x 3 mm

پیکربندی پین برای TUSB1105RGTR (پکیج 3 mm x 3 mm). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 3 mm x 3 mm برای TUSB1105RGTR

داده پین‌آوت تفصیلی موجود نیست برای TUSB1105RGTR.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

TUSB1105RGTR مناسب است برای 6 کاربردs: USB-to-Serial Data Collection, Portable Test and Measurement Equipment, Industrial Control Interface, USB Accessory and Peripheral Controller, Security and Monitoring Accessory, USB-to-Field Service Adapter.

🧩

USB-to-Serial Data Collection

TUSB1105RGTR fits compact data-collection equipment that exposes a USB 2.0 control interface to a host computer. Its confirmed full-speed rate of 12 Mbit/s is appropriate for configuration transfers, status reporting, and moderate command traffic, while low-speed support at 1.5 Mbit/s broadens peripheral compatibility. Place the transceiver between the embedded controller and USB connector, route D+ and D− as a short differential pair, and confirm the controller’s required signal polarity. The 3 mm by 3 mm VQFN package also helps reduce board area in handheld or portable instruments.

🖥️

Portable Test and Measurement Equipment

TUSB1105RGTR can provide the physical USB interface in portable measurement products that exchange commands and sampled results with a computer. USB full-speed operation at 12 Mbit/s is useful for instrument control and moderate data movement, while the 16-pin 3 mm by 3 mm VQFN package supports dense front-panel or internal layouts. The USB transceiver should be positioned near the connector, with the differential pair kept over a continuous ground plane. Engineers should also verify the transceiver’s polarity and signal mapping against the test instrument’s embedded controller.

🏭

Industrial Control Interface

TUSB1105RGTR is appropriate for industrial control modules that use a USB 2.0 full-speed connection for configuration, diagnostics, and firmware-related services. Its 12 Mbit/s full-speed capability provides more bandwidth than low-speed USB while remaining focused on control traffic rather than high-speed data streaming. In an industrial enclosure, keep the USB path away from motor switching stages and noisy power converters, and maintain short differential routing from the transceiver to the connector. Confirm grounding and signal polarity across controller, transceiver, and protection-device choices.

🔧

USB Accessory and Peripheral Controller

TUSB1105RGTR can interface a dedicated accessory controller to a USB host through a full-speed or low-speed USB connection. A single 1/1 transceiver path is suitable for compact peripheral designs that do not require simultaneous independent transmit and receive channels. The controller handles USB protocol tasks while the TUSB1105 handles differential transmit and receive signaling. Layout should prioritize a short connector-to-transceiver path, a solid ground reference, and clean separation from switching supplies or digital clocks that could degrade USB signal integrity.

🎥

Security and Monitoring Accessory

TUSB1105RGTR is suitable for monitoring accessories that connect to a host system for setup, status, and event transfer over USB full-speed. The confirmed 12 Mbit/s rate supports typical control traffic, and the compact VQFN package preserves board space beside sensors or communication hardware. Position the transceiver near the external USB connector, avoid routing the differential pair beneath switching regulators, and follow the exposed-pad and via recommendations in the manufacturer datasheet. Signal polarity and controller mapping must be verified before production.

🔧

USB-to-Field Service Adapter

TUSB1105RGTR can serve as the USB interface in a field-service adapter that exchanges diagnostic commands and configuration files with a laptop or service tablet. Full-speed operation at 12 Mbit/s is suitable for this transfer profile, and low-speed support at 1.5 Mbit/s allows broader compatibility with basic USB peripherals. The device’s 3 mm by 3 mm package supports compact adapters. Route the USB differential pair directly from the transceiver to the connector, provide a continuous ground plane, and verify connector orientation, signal polarity, and exposed-pad soldering in the assembly process.

خلاصه محصولات پیشنهادی

TUSB1106RTZR Texas Instruments استفاده‌شده در: USB-to-Serial Data Collection, Portable Test and Measurement Equipment, Industrial Control Interface, USB Accessory and Peripheral Controller, Security and Monitoring Accessory, USB-to-Field Service Adapter TUSB1105RTZR Related TUSB1105 USB transceiver variant استفاده‌شده در: USB-to-Serial Data Collection, Portable Test and Measurement Equipment, Industrial Control Interface, USB Accessory and Peripheral Controller, Security and Monitoring Accessory, USB-to-Field Service Adapter
Where can I buy TUSB1105RGTR online?
TUSB1105RGTR can be requested through the Request a Quote form on this page. The part is identified by Texas Instruments as a 1/1 half USB 2.0 transceiver in a 16-VQFN 3 mm by 3 mm package. For a new design, confirm the exact ordering code, quantity, packaging format, current availability, and expected lead time with the quote team.
What is the price of TUSB1105RGTR?
Current pricing for TUSB1105RGTR is available through the Request a Quote form on this page. Because distributor pricing and availability change with quantity and market conditions, use the form to request current unit pricing, quantity breaks, and lead time for the exact 1/1 USB 2.0 transceiver in the 16-VQFN package.
What is the lead time for TUSB1105RGTR?
The current lead time for TUSB1105RGTR should be confirmed through the Request a Quote form on this page. Include the required quantity, reel format, and target delivery date in the request. The manufacturer part number is TUSB1105RGTR, ensuring that the quotation applies to the 1/1 USB 2.0 transceiver in the 16-VQFN 3 mm by 3 mm package.
Is TUSB1105RGTR in stock?
Current inventory status for TUSB1105RGTR is best confirmed through the Request a Quote form on this page. Provide the quantity and packaging requirement so the quote team can check current supply. The component is a Texas Instruments USB 2.0 interface IC supporting full-speed and low-speed operation.
What are the key specifications of TUSB1105RGTR that engineers should know?
TUSB1105RGTR is a 1/1 half-duplex USB 2.0 transceiver with one transmit and receive path. It supports full-speed signaling at 12 Mbit/s and low-speed signaling at 1.5 Mbit/s, complies with Universal Serial Bus Specification Revision 2.0, and uses a 16-pin VQFN package measuring 3 mm by 3 mm. These are the principal electrical and physical characteristics identified by Texas Instruments.
What is the operating speed of TUSB1105RGTR?
TUSB1105RGTR supports USB full-speed operation at 12 Mbit/s and low-speed operation at 1.5 Mbit/s. According to the Texas Instruments product information, the device is compliant with Universal Serial Bus Specification Revision 2.0. It is therefore intended for USB 2.0 full-speed and low-speed interfaces, not high-speed 480 Mbit/s signaling.
What is the difference between TUSB1105RGTR and TUSB1106RTZR?
TUSB1106RTZR is identified as a pin- and package-compatible replacement candidate for TUSB1105RGTR in the available cross-reference information. Both are Texas Instruments USB transceivers, but the exact differences in signal polarity, operating features, and supported channels must be checked in their respective datasheets before substitution. Confirm every pin, supply condition, and USB electrical characteristic in the final circuit.
Is TUSB1106RTZR better than TUSB1105RGTR for USB peripheral designs?
TUSB1106RTZR may suit a design only after its datasheet confirms full pin compatibility with TUSB1105RGTR. The available cross-reference material identifies it as functionally similar and package-compatible, while the confirmed TUSB1105RGTR ratings are USB 2.0 full-speed at 12 Mbit/s and low-speed at 1.5 Mbit/s. Compare polarity, enable behavior, and application requirements before choosing.
When should I choose TUSB1105RGTR over another USB transceiver?
Choose TUSB1105RGTR when a design requires a compact, single-channel USB 2.0 interface supporting 12 Mbit/s full-speed and 1.5 Mbit/s low-speed operation in a 16-VQFN 3 mm by 3 mm package. Verify the required signal polarity, supply range, connector configuration, and exact pin assignments against the manufacturer datasheet before finalizing the component.
Is TUSB1105RGTR suitable for a portable USB data-collection device?
TUSB1105RGTR is suitable for many portable data-collection devices that use USB full-speed or low-speed connectivity rather than 480 Mbit/s high-speed operation. Its 3 mm by 3 mm VQFN package conserves board area, and the 12 Mbit/s full-speed mode is suitable for configuration and control traffic. Confirm power consumption, signal polarity, and connector implementation before release.
What can replace TUSB1105RGTR?
TUSB1106RTZR is the leading replacement candidate identified for TUSB1105RGTR because the available comparison information describes consistent functional characteristics and terminal compatibility. It should be treated as a candidate rather than an automatic substitution: compare pin functions, USB data rates, signal polarity, supply requirements, and the 16-pin package land pattern before production use.
Is TUSB1105RGTR the same as TUSB1105RTZR?
TUSB1105RGTR and TUSB1105RTZR are related Texas Instruments orderable variants, but their exact package and orderable-suffix meanings must be confirmed from the manufacturer part-details table. TUSB1105RGTR is confirmed as a 16-VQFN 3 mm by 3 mm device. Do not treat a shared base name as proof of drop-in compatibility without matching the complete land pattern and pin table.
Where can I download the TUSB1105RGTR datasheet PDF?
The official TUSB1105RGTR technical information is available from the Texas Instruments TUSB1105 product page at https://www.ti.com/product/TUSB1105. Use the manufacturer datasheet for the complete electrical characteristics, pin descriptions, application circuit, and PCB layout guidance. The confirmed product information identifies USB 2.0 compliance and operation at 12 Mbit/s and 1.5 Mbit/s.
Where can I find the TUSB1105RGTR pinout?
The TUSB1105RGTR pinout and pin descriptions should be taken from the pin-description table in the Texas Instruments TUSB1105 manufacturer datasheet. The device is confirmed in a 16-VQFN 3 mm by 3 mm package with an exposed pad. Use the datasheet for exact pin numbers and terminal functions rather than relying on generic USB transceiver diagrams.
How should TUSB1105RGTR be routed on a PCB?
Route the USB differential pair as a controlled, matched pair with a continuous ground reference, minimize stubs and unnecessary vias, and place the transceiver close to the USB connector. Implement the exposed-pad land pattern and thermal-via arrangement specified in the manufacturer datasheet. Keep sensitive return paths short and verify the final USB channel against applicable internal design rules.

داده‌های مرجع مهندسی برای TUSB1105RGTR — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose TUSB1105RGTR when the design needs one USB 2.0 transceiver path operating at 12 Mbit/s full-speed or 1.5 Mbit/s low-speed in a compact 16-pin VQFN package. Its confirmed 1/1 half-duplex configuration is appropriate for accessories, data-collection devices, test equipment, and control modules that do not require high-speed USB. Consider TUSB1105RTZR when the same device family is acceptable and the ordering suffix satisfies the production requirements. Evaluate TUSB1106RTZR when its additional or differing functions solve a design need, but verify polarity, enable behavior, and every pin against the manufacturer datasheet. Do not select either candidate solely from the package name; USB signal polarity, supply requirements, connector implementation, and exposed-pad layout must also match the target PCB.

مقایسه با جایگزین‌ها

پارامتر این محصول TUSB1106RTZR TUSB1105RTZR
Package 16-pin VQFN, 3 mm x 3 mm 16-pin VQFN 16-pin VQFN
Brand Texas Instruments Texas Instruments Texas Instruments
Product Type Universal Serial Bus transceiver USB transceiver USB transceiver
Mounting Type Surface mount Surface mount Surface mount

تفاوت‌های کلیدی

  • Compact single-channel USB interface (در مقابلTUSB1106RTZR)
  • Confirmed USB full-speed and low-speed support (در مقابلTUSB1105RTZR)
  • Single-rail interface placement in compact products (در مقابلTUSB1106RTZR)

یادداشت‌های طراحی

Route D+ and D− as a short, continuously referenced differential pair from TUSB1105RGTR to the USB connector. Minimize stubs, avoid unnecessary vias, and keep the pair over an uninterrupted ground plane. Place the transceiver close to the connector and compare the final geometry with the USB layout guidance in the Texas Instruments manufacturer datasheet.

Implement the exposed-pad land pattern, thermal vias, and solder-mask design specified for the 16-VQFN package. The exposed pad should connect to the appropriate ground plane without creating return-path discontinuities. Follow the manufacturer’s land-pattern dimensions and reflow profile rather than substituting a generic QFN footprint.

Keep the USB channel away from noisy switching regulators, high-current motor drivers, and unrelated high-speed clocks. Maintain consistent impedance along the differential pair and use only short connections between the transceiver and its external protection or filtering components. Validate signal integrity with the connector, protection-device capacitance, and controller configuration used in the finished product.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

Compliance attributes were not confirmed in the manufacturer product excerpts or verified distributor results. Review the current Texas Instruments product information and applicable material declarations before release.

تاریخ تأیید داده‌ها: 2026-11-16 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

TUSB1105RGTR datasheet TUSB1105RGTR pinout TUSB1105RGTR datasheet pdf TUSB1105RGTR USB 2.0 TUSB1105RGTR VQFN-16 TUSB1105RGTR equivalent TUSB1105RGTR replacement TUSB1105RGTR cross reference TUSB1105RGTR vs TUSB1106RTZR Texas Instruments TUSB1105RGTR TUSB1105RGTR footprint TUSB1105RGTR application circuit TUSB1105RGTR price TUSB1105RGTR stock

قطعات و اصطلاحات مرتبط

Texas Instruments TUSB1105RGTR TUSB1105 TUSB1106RTZR TUSB1105RTZR Universal Serial Bus transceiver USB transceiver USB 2.0 Universal Serial Bus Specification Revision 2.0 full-speed USB low-speed USB 12 Mbit/s 1.5 Mbit/s 1/1 half-duplex transceiver 16-pin VQFN QFN family surface-mount package differential signaling USB Type-A USB Type-B exposed pad PCB layout RoHS REACH AEC-Q100
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ