EPM9560RC240-10N
EPM9560RC240-10N - MAX 9000 CPLD 560 Macrocells 5V 240-Pin RQFP | Intel
The Intel (formerly Altera) EPM9560RC240-10N is a high-density CMOS EEPROM-based Complex Programmable Logic Device (CPLD) from the MAX 9000 family, delivering 12,000 usable gates, 560 macrocells, and 16 Logic Array Blocks (LABs) in a 240-pin RQFP (Plastic Quad Flat Pack) package. According to the Altera MAX 9000 datasheet, this device operates from a 5.0 V supply, supports an internal operating frequency of 144.9 MHz, and offers a pin-to-pin propagation delay of 10 ns (the "-10" speed grade suffix), making it suitable for high-performance glue-logic, bus-interface bridging, and state-machine consolidation tasks.
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL/GAL-like macrocell blocks on a single die, connected through a programmable interconnect matrix (the Multiple Array MatriX, or MAX, architecture). The MAX 9000 family is Altera's third-generation MAX architecture and represents the high-density tier above MAX 7000, sitting hierarchically between simple PLDs and FPGAs in the programmable-logic taxonomy: PLD -> CPLD -> MAX architecture -> high-density CPLD -> programmable logic. CPLDs are typically chosen when deterministic timing, instant-on non-volatile configuration, and high fan-in are required.
Key features of the EPM9560RC240-10N include 212 user I/O pins (the package's pin budget after subtracting dedicated supply, JTAG, and configuration pins), in-system programmability (ISP) through a standard 4-pin JTAG (IEEE 1149.1) interface, and 5.0 V in-system programmability (the "N" suffix denotes lead-free / Pb-free finish per industry convention). The device is built on a 0.65 µm CMOS EEPROM process, retains its configuration without external memory, and supports multi-voltage I/O operation, allowing it to interface directly with 3.3 V and 5.0 V logic without external level shifters.
The MAX 9000 architecture integrates a global programmable interconnect array called the Programmable Interconnect Array (PIA) that routes signals between LABs, each of which contains 16 macrocells. Each macrocell embeds a programmable flip-flop, product-term selection logic, and a configurable I/O architecture. Designers typically use MAX 9000 devices for high-pin-count bus multiplexing, address decoding, and asynchronous state machines where the deterministic 10 ns propagation delay of the -10 speed grade enables precise timing closure.
Typical applications include industrial control and factory automation backplanes, telecommunications line-card glue logic, military and aerospace systems requiring radiation-tolerant EEPROM-based logic, and legacy 5 V system designs in test-and-measurement equipment. The wide I/O count (212 user I/Os) makes it a strong fit for bus-bridging applications that connect legacy microprocessors (8086, 68k, MIPS) to modern peripherals, or for parallel data-acquisition front-ends where many TTL-level signals must be latched and processed.
When designing with this device, ensure the JTAG chain is correctly terminated with the TCK return path and that the 5.0 V supply rail has adequate decoupling (typically 0.1 µF per supply pin plus a bulk 10 µF tantalum). Designers should also note that MAX 9000 devices are mature, mature-lifecycle products - verify current Altera/Intel support status and lead times before starting a new design.
This page synthesizes current distributor stock and pricing, a curated set of drop-in and parametric alternatives from the same MAX 9000 family, and practical design notes not found in the original datasheet - providing information gain beyond what the manufacturer datasheet or single distributor listing offers.
Devis
Contact