2EDL5023U2DXTMA1 vs 2EDL900G3XTMA1 Comparaison
Comparaison détaillée côte à côte de 2EDL5023U2DXTMA1 par Infineon et 2EDL900G3XTMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
2EDL5023U2DXTMA1 - 120V Boot, 3A Half-Bridge Gate Driver | Infineon
2EDL5023U2DXTMA1 ✓ ActifComparaison des spécifications
| Paramètre | 2EDL5023U2DXTMA1 | 2EDL900G3XTMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,40 | $2,20 |
| Driver Configuration | Half-Bridge (High-Side + Low-Side) | — |
| Driver Type | Non-Inverting | — |
| Nombre de sorties | 2 | — |
| Bootstrap Voltage Rating | 120 V | — |
| Peak Gate Drive Current | 3 A (typical sink/source) | — |
| Number of Channels | 1 (Half-Bridge) | 2 (high-side + low-side) |
| Input Logic | TTL-compatible | — |
| Input Voltage (VDD) | 5 V (gate drive supply) | — |
| Enable Pin (EN) | Active-High (logic high or left open enables) | — |
| PWM Inputs | HI (high-side), LI (low-side) | — |
| Ground Return | VSS | — |
| Boîtier | PG-TSNP-12-5 | TSNP-16 (3x3 mm) with exposed pad |
| Type de montage | Surface Mount | Surface Mount |
| Température de fonctionnement | -40C to +125C (typical industrial range) | — |
| Statut RoHS | Compliant | Compliant |
| Tape and Reel Packaging | Yes | — |
| Product Type | — | Dual-channel level-shift gate driver IC |
| Topology Supported | — | Half-bridge, high-side, low-side |
| Isolation Type | — | Junction isolation (JI), 120 V |
| Peak Source Current | — | 4 A |
| Peak Sink Current | — | 6 A |
| Drive Output Voltage Range | — | 4 V to 16 V |
| Supply Voltage (VDD/VBS) | — | 4 V to 16 V |
| Switching Device Supported | — | Si MOSFET, enhancement-mode GaN FET |
| Configurable Deadtime | — | Yes (programmable) |
| Integrated Current Sense Amplifier | — | Yes |
| PWM Modes | — | Tri-state, HSCC HS, HSCC LS, Hi/Li, Hi/Li inverted |
| Input Logic Compatibility | — | 3.3 V / 5 V / TTL (per datasheet) |
| Plage de température de fonctionnement | — | -40 C to +125 C |
| Niveau MSL | — | 1 |