MPXV2010GP vs MPX2010DP Ikinahambing

Detalyadong pagkakahiwalay na pagkakahambing ng MPXV2010GP sa pamamagitan ng STMicroelectronics at MPX2010DP sa pamamagitan ng NXP Semiconductors. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.

STMicroelectronics
MPXV2010GP MPXV2010GP - 10kPa Vented Gauge Pressure Sensor | STMicroelectronics

MPXV2010GP - 10kPa Vented Gauge Pressure Sensor | STMicroelectronics

MPXV2010GP ✓ Nakahanda
NXP Semiconductors
MPX2010DP MPX2010DP - 10 kPa Differential Pressure Sensor | NXP/STMicro

MPX2010DP - 10 kPa Differential Pressure Sensor | NXP/STMicro

MPX2010DP ✓ Nakahanda

Pagsanggunian na paghahambing

Parametro MPXV2010GP MPX2010DP
Brand STMicroelectronics NXP Semiconductors
Kategorya Pressure Sensors Pressure Sensors
Katayuan ng Lifecycle Aktibo Aktibo
Pressure Type Vented Gauge —
Operating Pressure Range 0 kPa to 10 kPa —
Maximum Overload Pressure 75 kPa —
Supply Voltage (Vex) 10 V typical (max 16 V) —
Full-Scale Output (Span) at 10 V 25 mV nominal at 10 kPa —
Zero Pressure Output (Offset) 0 mV to 1.0 mV —
Pressure Hysteresis 1.0 kPa (typical) —
Sensitivity 2.5 mV/kPa nominal at 10 V —
Response Time 1.0 ms (typical) 1.0 ms (typical)
Type ng Output Analog, ratiometric, mV output Analog voltage, Wheatstone bridge (mV level)
Temperature na Operasyon -40 C to +125 C -40 °C to +125 °C
Port Configuration Single vertical side port, 0.13" (3.17 mm) tube Dual ports (differential), 0.19 inch / 4.93 mm tubes
Packhaging 8-SMD, Gull Wing, Side Port (Case 344B-01) —
Uri ng Pagpapasok Surface Mount —
Technology Silicon piezoresistive MEMS, on-chip temp compensated Piezoresistive (silicon strain gauge bridge)
Tindminan RoHS Compliant Compliant
Type ng Sensor — Differential Pressure Sensor
Pressure Range — 0 to 10 kPa (0 to 1.45 PSI)
Typical Full-Scale Span — 25 mV at 10 V excitation
Zero Pressure Offset — 0 mV nominally (±1.0 mV max)
Volte ng Pagbibigay — 10 V DC typical (max 16 V)
Linearity — ±0.05% (typ)
Temperature Compensation — 0 °C to +85 °C (on-chip)
Maximum Overpressure — 75 kPa
Burst Pressure — 200 kPa
Package / Mounting — 4-SIP Module (through-hole with axial tubes)
Media Compatibility — Dry air or non-corrosive gas

Mga Datasheets at Resources

Tingnan ang Lahat ng mga Produkto Lumikha ng BOM Hilingin ang Kita