SN65HVD10D vs SN65HVD77D Comparaison
Comparaison détaillée côte à côte de SN65HVD10D par Texas Instruments et SN65HVD77D par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
SN65HVD10D - 3.3V RS-485 Transceiver 32Mbps | Texas Instruments
SN65HVD10D ✓ ActifTexas Instruments
SN65HVD77D - 3.3V 50Mbps Full-Duplex RS-485 | Texas Instruments
SN65HVD77D ✓ ActifComparaison des spécifications
| Paramètre | SN65HVD10D | SN65HVD77D |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Device Type | Half-duplex RS-485 / RS-422 transceiver (1/1) | — |
| Tension d'alimentation | 3.3 V (single supply) | — |
| Maximum Data Rate | 32 Mbps | 50 Mbps |
| Boîtier | 8-pin SOIC (D package) | 8-pin SOIC (D) |
| Type de montage | Surface Mount | Surface mount |
| Bus-Pin ESD Protection | Exceeds 16 kV HBM | — |
| Standards Compliance | ANSI TIA/EIA-485-A, ISO 8482:1993 | — |
| Driver Output | 3-state differential line driver | — |
| Receiver Output | Differential input line receiver, single-ended logic output | — |
| Unit Load | [DATA_NEEDED: unit load / maximum node count for SN65HVD10] | — |
| Bus-Fault Protection | 5 A typical (family feature per distributor datasheet listing) | — |
| Plage de température de fonctionnement | -55 °C to +125 °C (per distributor listing; commercial-grade range per TI datasheet) | -40°C to 125°C |
| Logic Levels | 3.3 V CMOS-compatible | — |
| Number of Transceivers | 1 | — |
| Statut RoHS | [DATA_NEEDED: RoHS statement for this part number] | Compliant |
| Niveau MSL | MSL 1 | — |
| Pricing Reference | From $1.4594 (LCSC) as of 2026-10-30 | — |
| Product Type | — | Full-duplex RS-485 transceiver |
| Supply Voltage Range | — | 3.0 V to 3.6 V |
| Nominal Supply Voltage | — | 3.3 V |
| Number of Drivers | — | 1 |
| Number of Receivers | — | 1 |
| Duplex Mode | — | Full duplex |
| Supported Standards | — | RS-485 and RS-422 |
| ESD Protection | — | ±12 kV IEC |
| Package Width | — | 3.90 mm |
| External Enable Controls | — | None |
| Driver Output Type | — | Differential |
| Receiver Output Type | — | Single-ended logic output |
| Low-Power Standby Current | — | Less than 5 µA when driver and receiver are disabled |
| Termination Requirement | — | External termination required |