SN65HVD10D vs SN65HVD77D Сравнение
Подробное сравнение бок о бок SN65HVD10D от Texas Instruments и SN65HVD77D от Texas Instruments. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Texas Instruments
SN65HVD10D - 3.3V RS-485 Transceiver 32Mbps | Texas Instruments
SN65HVD10D ✓ АктивенTexas Instruments
SN65HVD77D - 3.3V 50Mbps Full-Duplex RS-485 | Texas Instruments
SN65HVD77D ✓ АктивенСравнение характеристик
| Параметр | SN65HVD10D | SN65HVD77D |
|---|---|---|
| Бренд | Texas Instruments | Texas Instruments |
| Категория | Interface ICs | Interface ICs |
| Статус жизненного цикла | Активен | Активен |
| Device Type | Half-duplex RS-485 / RS-422 transceiver (1/1) | — |
| Напряжение питания | 3.3 V (single supply) | — |
| Maximum Data Rate | 32 Mbps | 50 Mbps |
| Корпус | 8-pin SOIC (D package) | 8-pin SOIC (D) |
| Тип монтажа | Surface Mount | Surface mount |
| Bus-Pin ESD Protection | Exceeds 16 kV HBM | — |
| Standards Compliance | ANSI TIA/EIA-485-A, ISO 8482:1993 | — |
| Driver Output | 3-state differential line driver | — |
| Receiver Output | Differential input line receiver, single-ended logic output | — |
| Unit Load | [DATA_NEEDED: unit load / maximum node count for SN65HVD10] | — |
| Bus-Fault Protection | 5 A typical (family feature per distributor datasheet listing) | — |
| Диапазон рабочих температур | -55 °C to +125 °C (per distributor listing; commercial-grade range per TI datasheet) | -40°C to 125°C |
| Logic Levels | 3.3 V CMOS-compatible | — |
| Number of Transceivers | 1 | — |
| Статус RoHS | [DATA_NEEDED: RoHS statement for this part number] | Compliant |
| Уровень MSL | MSL 1 | — |
| Pricing Reference | From $1.4594 (LCSC) as of 2026-10-30 | — |
| Product Type | — | Full-duplex RS-485 transceiver |
| Supply Voltage Range | — | 3.0 V to 3.6 V |
| Nominal Supply Voltage | — | 3.3 V |
| Number of Drivers | — | 1 |
| Number of Receivers | — | 1 |
| Duplex Mode | — | Full duplex |
| Supported Standards | — | RS-485 and RS-422 |
| ESD Protection | — | ±12 kV IEC |
| Package Width | — | 3.90 mm |
| External Enable Controls | — | None |
| Driver Output Type | — | Differential |
| Receiver Output Type | — | Single-ended logic output |
| Low-Power Standby Current | — | Less than 5 µA when driver and receiver are disabled |
| Termination Requirement | — | External termination required |