SN65HVD10D vs SN65HVD77D So sánh
So sánh chi tiết song song của SN65HVD10D bằng Texas Instruments và SN65HVD77D bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
SN65HVD10D - 3.3V RS-485 Transceiver 32Mbps | Texas Instruments
SN65HVD10D ✓ Hoạt độngTexas Instruments
SN65HVD77D - 3.3V 50Mbps Full-Duplex RS-485 | Texas Instruments
SN65HVD77D ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | SN65HVD10D | SN65HVD77D |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Interface ICs | Interface ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Device Type | Half-duplex RS-485 / RS-422 transceiver (1/1) | — |
| Điện áp cung cấp | 3.3 V (single supply) | — |
| Maximum Data Rate | 32 Mbps | 50 Mbps |
| Hộp | 8-pin SOIC (D package) | 8-pin SOIC (D) |
| Kiểu lắp đặt | Surface Mount | Surface mount |
| Bus-Pin ESD Protection | Exceeds 16 kV HBM | — |
| Standards Compliance | ANSI TIA/EIA-485-A, ISO 8482:1993 | — |
| Driver Output | 3-state differential line driver | — |
| Receiver Output | Differential input line receiver, single-ended logic output | — |
| Unit Load | [DATA_NEEDED: unit load / maximum node count for SN65HVD10] | — |
| Bus-Fault Protection | 5 A typical (family feature per distributor datasheet listing) | — |
| Khoảng nhiệt độ hoạt động | -55 °C to +125 °C (per distributor listing; commercial-grade range per TI datasheet) | -40°C to 125°C |
| Logic Levels | 3.3 V CMOS-compatible | — |
| Number of Transceivers | 1 | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS statement for this part number] | Compliant |
| Cấp MSL | MSL 1 | — |
| Pricing Reference | From $1.4594 (LCSC) as of 2026-10-30 | — |
| Product Type | — | Full-duplex RS-485 transceiver |
| Supply Voltage Range | — | 3.0 V to 3.6 V |
| Nominal Supply Voltage | — | 3.3 V |
| Number of Drivers | — | 1 |
| Number of Receivers | — | 1 |
| Duplex Mode | — | Full duplex |
| Supported Standards | — | RS-485 and RS-422 |
| ESD Protection | — | ±12 kV IEC |
| Package Width | — | 3.90 mm |
| External Enable Controls | — | None |
| Driver Output Type | — | Differential |
| Receiver Output Type | — | Single-ended logic output |
| Low-Power Standby Current | — | Less than 5 µA when driver and receiver are disabled |
| Termination Requirement | — | External termination required |