SN65HVD10D vs SN65HVD77D Karşılaştırma
Ayrıntılı yan yana karşılaştırma SN65HVD10D tarafından Texas Instruments ve SN65HVD77D tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
SN65HVD10D - 3.3V RS-485 Transceiver 32Mbps | Texas Instruments
SN65HVD10D ✓ AktifTexas Instruments
SN65HVD77D - 3.3V 50Mbps Full-Duplex RS-485 | Texas Instruments
SN65HVD77D ✓ AktifÖzellik Karşılaştırması
| Parametre | SN65HVD10D | SN65HVD77D |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Device Type | Half-duplex RS-485 / RS-422 transceiver (1/1) | — |
| Besleme Gerilimi | 3.3 V (single supply) | — |
| Maximum Data Rate | 32 Mbps | 50 Mbps |
| Paket | 8-pin SOIC (D package) | 8-pin SOIC (D) |
| Montaj Türü | Surface Mount | Surface mount |
| Bus-Pin ESD Protection | Exceeds 16 kV HBM | — |
| Standards Compliance | ANSI TIA/EIA-485-A, ISO 8482:1993 | — |
| Driver Output | 3-state differential line driver | — |
| Receiver Output | Differential input line receiver, single-ended logic output | — |
| Unit Load | [DATA_NEEDED: unit load / maximum node count for SN65HVD10] | — |
| Bus-Fault Protection | 5 A typical (family feature per distributor datasheet listing) | — |
| İşletim Sıcaklığı Aralığı | -55 °C to +125 °C (per distributor listing; commercial-grade range per TI datasheet) | -40°C to 125°C |
| Logic Levels | 3.3 V CMOS-compatible | — |
| Number of Transceivers | 1 | — |
| RoHS Durumu | [DATA_NEEDED: RoHS statement for this part number] | Compliant |
| MSL Seviyesi | MSL 1 | — |
| Pricing Reference | From $1.4594 (LCSC) as of 2026-10-30 | — |
| Product Type | — | Full-duplex RS-485 transceiver |
| Supply Voltage Range | — | 3.0 V to 3.6 V |
| Nominal Supply Voltage | — | 3.3 V |
| Number of Drivers | — | 1 |
| Number of Receivers | — | 1 |
| Duplex Mode | — | Full duplex |
| Supported Standards | — | RS-485 and RS-422 |
| ESD Protection | — | ±12 kV IEC |
| Package Width | — | 3.90 mm |
| External Enable Controls | — | None |
| Driver Output Type | — | Differential |
| Receiver Output Type | — | Single-ended logic output |
| Low-Power Standby Current | — | Less than 5 µA when driver and receiver are disabled |
| Termination Requirement | — | External termination required |