SN65HVD70DGSR vs SN65HVD76D Comparaison
Comparaison détaillée côte à côte de SN65HVD70DGSR par Texas Instruments et SN65HVD76D par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
SN65HVD70DGSR - 3.3V Full-Duplex RS-485 400kbps Transceiver, 10-VSSOP | Texas Instruments
SN65HVD70DGSR ✓ ActifComparaison des spécifications
| Paramètre | SN65HVD70DGSR | SN65HVD76D |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | RS-485 / RS-422 Transceiver | Full-duplex RS-485 transceiver |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Duplex | Full | — |
| Supply Voltage (VCC) | 3.0 V to 3.6 V | — |
| Débit de données | Up to 400 kbps | — |
| IEC ESD Protection (Contact) | ±12 kV (IEC 61000-4-2) | — |
| HBM ESD Protection (Bus pins) | ±30 kV (HBM) | — |
| Receiver Hysteresis | 50 mV (typical) | 70 mV |
| Common-Mode Range | -7 V to +12 V | — |
| Unit Load | 1/8 unit load (up to 256 nodes) | — |
| Driver Enable | Active-high | Active high |
| Receiver Enable | Active-low | Active low |
| Standby Current | < 5 µA (both disabled) | — |
| Température de fonctionnement | -40 °C to +125 °C | — |
| Boîtier | 10-pin VSSOP (DGS) with PowerPAD | 14-pin SOIC (D) |
| Type de montage | Surface Mount | Surface mount |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Tension d'alimentation | — | 3.3 V |
| Supply Voltage Range | — | 3 V to 3.6 V |
| Maximum Data Rate | — | 50 Mbps |
| Duplex Mode | — | Full-duplex |
| Supported Protocols | — | RS-485 and RS-422 |
| Receiver Unit Load | — | 1/8 unit load |
| Maximum Bus Nodes | — | 256 nodes |
| IEC Contact Discharge Protection | — | Greater than 12 kV |
| Human Body Model Protection | — | Greater than 30 kV |
| IEC Fast Transient Burst Protection | — | Greater than 4 kV |
| Low Standby Current | — | Less than 5 uA with driver and receiver disabled |
| Plage de température de fonctionnement | — | -40 C to 125 C |
| REACH Status | — | [DATA_NEEDED: REACH status] |