SN65HVD70DGSR vs SN65HVD76D So sánh

So sánh chi tiết song song của SN65HVD70DGSR bằng Texas Instruments và SN65HVD76D bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
SN65HVD76D SN65HVD76D - 50Mbps Full-Duplex RS-485 | Texas Instruments

SN65HVD76D - 50Mbps Full-Duplex RS-485 | Texas Instruments

SN65HVD76D ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số SN65HVD70DGSR SN65HVD76D
Thương hiệu Texas Instruments Texas Instruments
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type RS-485 / RS-422 Transceiver Full-duplex RS-485 transceiver
Protocol RS-422, RS-485 —
Number of Drivers/Receivers 1/1 1/1
Duplex Full —
Supply Voltage (VCC) 3.0 V to 3.6 V —
Tốc độ dữ liệu Up to 400 kbps —
IEC ESD Protection (Contact) ±12 kV (IEC 61000-4-2) —
HBM ESD Protection (Bus pins) ±30 kV (HBM) —
Receiver Hysteresis 50 mV (typical) 70 mV
Common-Mode Range -7 V to +12 V —
Unit Load 1/8 unit load (up to 256 nodes) —
Driver Enable Active-high Active high
Receiver Enable Active-low Active low
Standby Current < 5 µA (both disabled) —
Nhiệt độ hoạt động -40 °C to +125 °C —
Hộp 10-pin VSSOP (DGS) with PowerPAD 14-pin SOIC (D)
Kiểu lắp đặt Surface Mount Surface mount
Trạng thái RoHS Compliant [DATA_NEEDED: RoHS status]
Điện áp cung cấp — 3.3 V
Supply Voltage Range — 3 V to 3.6 V
Maximum Data Rate — 50 Mbps
Duplex Mode — Full-duplex
Supported Protocols — RS-485 and RS-422
Receiver Unit Load — 1/8 unit load
Maximum Bus Nodes — 256 nodes
IEC Contact Discharge Protection — Greater than 12 kV
Human Body Model Protection — Greater than 30 kV
IEC Fast Transient Burst Protection — Greater than 4 kV
Low Standby Current — Less than 5 uA with driver and receiver disabled
Khoảng nhiệt độ hoạt động — -40 C to 125 C
REACH Status — [DATA_NEEDED: REACH status]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá