SN65HVD70DGSR vs SN65HVD76D Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng SN65HVD70DGSR sa pamamagitan ng Texas Instruments at SN65HVD76D sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
SN65HVD70DGSR - 3.3V Full-Duplex RS-485 400kbps Transceiver, 10-VSSOP | Texas Instruments
SN65HVD70DGSR ✓ NakahandaPagsanggunian na paghahambing
| Parametro | SN65HVD70DGSR | SN65HVD76D |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Kategorya | Interface ICs | Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Product Type | RS-485 / RS-422 Transceiver | Full-duplex RS-485 transceiver |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Duplex | Full | — |
| Supply Voltage (VCC) | 3.0 V to 3.6 V | — |
| Rate ng Data | Up to 400 kbps | — |
| IEC ESD Protection (Contact) | ±12 kV (IEC 61000-4-2) | — |
| HBM ESD Protection (Bus pins) | ±30 kV (HBM) | — |
| Receiver Hysteresis | 50 mV (typical) | 70 mV |
| Common-Mode Range | -7 V to +12 V | — |
| Unit Load | 1/8 unit load (up to 256 nodes) | — |
| Driver Enable | Active-high | Active high |
| Receiver Enable | Active-low | Active low |
| Standby Current | < 5 µA (both disabled) | — |
| Temperature na Operasyon | -40 °C to +125 °C | — |
| Packhaging | 10-pin VSSOP (DGS) with PowerPAD | 14-pin SOIC (D) |
| Uri ng Pagpapasok | Surface Mount | Surface mount |
| Tindminan RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Volte ng Pagbibigay | — | 3.3 V |
| Supply Voltage Range | — | 3 V to 3.6 V |
| Maximum Data Rate | — | 50 Mbps |
| Duplex Mode | — | Full-duplex |
| Supported Protocols | — | RS-485 and RS-422 |
| Receiver Unit Load | — | 1/8 unit load |
| Maximum Bus Nodes | — | 256 nodes |
| IEC Contact Discharge Protection | — | Greater than 12 kV |
| Human Body Model Protection | — | Greater than 30 kV |
| IEC Fast Transient Burst Protection | — | Greater than 4 kV |
| Low Standby Current | — | Less than 5 uA with driver and receiver disabled |
| Hanay ng Temperature na Operasyon | — | -40 C to 125 C |
| REACH Status | — | [DATA_NEEDED: REACH status] |