SN65HVD70DGSR vs SN65HVD76D Comparação
Comparação detalhada lado a lado de SN65HVD70DGSR por Texas Instruments e SN65HVD76D por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Texas Instruments
SN65HVD70DGSR - 3.3V Full-Duplex RS-485 400kbps Transceiver, 10-VSSOP | Texas Instruments
SN65HVD70DGSR ✓ AtivoComparação de especificações
| Parâmetro | SN65HVD70DGSR | SN65HVD76D |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Product Type | RS-485 / RS-422 Transceiver | Full-duplex RS-485 transceiver |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Duplex | Full | — |
| Supply Voltage (VCC) | 3.0 V to 3.6 V | — |
| Taxa de dados | Up to 400 kbps | — |
| IEC ESD Protection (Contact) | ±12 kV (IEC 61000-4-2) | — |
| HBM ESD Protection (Bus pins) | ±30 kV (HBM) | — |
| Receiver Hysteresis | 50 mV (typical) | 70 mV |
| Common-Mode Range | -7 V to +12 V | — |
| Unit Load | 1/8 unit load (up to 256 nodes) | — |
| Driver Enable | Active-high | Active high |
| Receiver Enable | Active-low | Active low |
| Standby Current | < 5 µA (both disabled) | — |
| Temperatura de operação | -40 °C to +125 °C | — |
| Encapsulamento | 10-pin VSSOP (DGS) with PowerPAD | 14-pin SOIC (D) |
| Tipo de montagem | Surface Mount | Surface mount |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Tensão de alimentação | — | 3.3 V |
| Supply Voltage Range | — | 3 V to 3.6 V |
| Maximum Data Rate | — | 50 Mbps |
| Duplex Mode | — | Full-duplex |
| Supported Protocols | — | RS-485 and RS-422 |
| Receiver Unit Load | — | 1/8 unit load |
| Maximum Bus Nodes | — | 256 nodes |
| IEC Contact Discharge Protection | — | Greater than 12 kV |
| Human Body Model Protection | — | Greater than 30 kV |
| IEC Fast Transient Burst Protection | — | Greater than 4 kV |
| Low Standby Current | — | Less than 5 uA with driver and receiver disabled |
| Faixa de temperatura de operação | — | -40 C to 125 C |
| REACH Status | — | [DATA_NEEDED: REACH status] |