5M570ZT100I5N - MAX V CPLD 440LE 100TQFP | Intel | Industrial
Артикул: 5M570ZT100I5N ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $10.92 | $10,92 |
| 10 | $9.85 | $98,50 |
| 100 | $8.62 | $862,00 |
| 500 | $7.48 | $3.740,00 |
| 1.000 | $6.74 | $6.740,00 |
5M570ZT100I5N Обзор
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that sits between simple gate arrays and full FPGAs in the programmable logic hierarchy. CPLD -> programmable logic -> logic IC -> semiconductor. MAX V devices use a flash-backed look-up table (LUT) architecture with a deterministic timing fabric, making them ideal for implementing boot-loading glue logic, address decoding, power-up sequencing, and high-speed control state machines where instant-on non-volatility is required.
The 5M570ZT100I5N integrates 570 logic elements across 440 macrocells with 8 dedicated clock pins and up to 79 user I/O. The MultiVolt core supports 1.8 V, 2.5 V, 3.3 V, and 5.0 V mixed-voltage operation through bank-based I/O standards including LVCMOS, LVTTL, and PCI. The JTAG-based in-system programmability (ISP) eliminates external boot memory and reduces bill-of-materials cost.
The MAX V architecture combines a continuous interconnect fabric with flash configuration memory, delivering instant-on behavior at sub-1 ms wake time. Internal pull-up resistors on every I/O eliminate external biasing networks, while the built-in flash reduces board complexity by removing the need for external boot PROMs in FPGA-coprocessor designs. The device supports the Quartus Prime design suite from synthesis through place-and-route and programming.
Typical applications include industrial control bus decoding, motor-drive interface glue, I/O expansion for microcontrollers, power-supply sequencing, address latch and chip-select generation, and FPGA-configuration supervision. The wide -40C to +100C industrial temperature range suits factory automation, building controls, and ruggedized embedded systems.
When designing with this part, allocate sufficient decoupling (100 nF plus 10 uF bulk per supply pin pair) and follow Altera's TQFP-100 land pattern recommendations. Verify I/O bank voltage compatibility when bridging between 3.3 V and 1.8 V logic domains to prevent contention during configuration.
This page synthesizes distributor pricing, pin-compatible alternatives from the MAX V family, and practical design notes that complement - not duplicate - the manufacturer datasheet.
Аналоги без доработки для 5M570ZT100I5N — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с 5M570ZT100I5N (тот же форм-фактор и посадочное место) — отличается по Package, Configuration Memory, Programming Interface, User Flash Memory, Family.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
5M570ZT100C5N
✅ Прямая замена✓ В наличии
$3.7 / шт.
Открыть даташит →5M570ZT100C5
✅ Прямая замена✓ В наличии
$6.75 / шт.
Открыть даташит →5M570ZT100C4N
✅ Прямая замена✓ В наличии
$9.2 / шт.
Открыть даташит →5M570ZT100A5N
✅ Прямая замена✓ В наличии
$9.75 / шт.
Открыть даташит →5M570ZT100I5
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
5M570ZF256I5N
✅ Прямая замена✓ В наличии
$10.26 / шт.
Открыть даташит →5M570ZT100I5N Максимальные параметры и электрические характеристики
| Series | MAX V |
| Family | MAX V CPLD |
| Logic Elements | 570 |
| Macrocells | 440 |
| Maximum User I/O | 79 |
| Propagation Delay (tPD) | 9 ns |
| Maximum Internal Frequency | 118.3 MHz |
| Number of Dedicated Clock Pins | 8 |
| Core Supply Voltage | 1.8 V |
| I/O Bank Voltage Support | 1.8 V / 2.5 V / 3.3 V / 5.0 V (MultiVolt) |
| Рабочая температура | -40C to +100C (Industrial) |
| Корпус | 100-pin TQFP (14 x 14 mm) |
| Тип монтажа | Surface Mount |
| Configuration Memory | Flash (non-volatile, instant-on) |
| Programming Interface | JTAG (IEEE 1149.1) / ISP |
| Уровень MSL | 3 |
| Статус RoHS | Compliant |
Конфигурация выводов 5M570ZT100I5N
| Контакт 1 | I/O — User I/O pin (bank 1) |
| Контакт 2 | I/O — User I/O pin (bank 1) |
| Контакт 3 | I/O — User I/O pin (bank 1) |
| Контакт 4 | I/O — User I/O pin (bank 1) |
| Контакт 5 | I/O — User I/O pin (bank 1) |
| Контакт 6 | I/O — User I/O pin (bank 1) |
| Контакт 7 | I/O — User I/O pin (bank 1) |
| Контакт 8 | I/O — User I/O pin (bank 1) |
| Контакт 9 | I/O — User I/O pin (bank 1) |
| Контакт 10 | I/O — User I/O pin (bank 1) |
| Контакт 11 | I/O — User I/O pin (bank 1) |
| Контакт 12 | I/O — User I/O pin (bank 1) |
| Контакт 13 | I/O — User I/O pin (bank 1) |
| Контакт 14 | I/O — User I/O pin (bank 1) |
| Контакт 15 | GND — Ground |
| Контакт 16 | I/O — User I/O pin (bank 2) |
| Контакт 17 | I/O — User I/O pin (bank 2) |
| Контакт 18 | I/O — User I/O pin (bank 2) |
| Контакт 19 | I/O — User I/O pin (bank 2) |
| Контакт 20 | I/O — User I/O pin (bank 2) |
| Контакт 21 | I/O — User I/O pin (bank 2) |
| Контакт 22 | I/O — User I/O pin (bank 2) |
| Контакт 23 | I/O — User I/O pin (bank 2) |
| Контакт 24 | I/O — User I/O pin (bank 2) |
| Контакт 25 | I/O — User I/O pin (bank 2) |
| Контакт 26 | I/O — User I/O pin (bank 2) |
| Контакт 27 | I/O — User I/O pin (bank 2) |
| Контакт 28 | I/O — User I/O pin (bank 2) |
| Контакт 29 | I/O — User I/O pin (bank 2) |
| Контакт 30 | I/O — User I/O pin (bank 2) |
| Контакт 31 | GND — Ground |
| Контакт 32 | I/O — User I/O pin (bank 3) |
| Контакт 33 | I/O — User I/O pin (bank 3) |
| Контакт 34 | I/O — User I/O pin (bank 3) |
| Контакт 35 | I/O — User I/O pin (bank 3) |
| Контакт 36 | I/O — User I/O pin (bank 3) |
| Контакт 37 | I/O — User I/O pin (bank 3) |
| Контакт 38 | I/O — User I/O pin (bank 3) |
| Контакт 39 | I/O — User I/O pin (bank 3) |
| Контакт 40 | I/O — User I/O pin (bank 3) |
| Контакт 41 | I/O — User I/O pin (bank 3) |
| Контакт 42 | I/O — User I/O pin (bank 3) |
| Контакт 43 | I/O — User I/O pin (bank 3) |
| Контакт 44 | I/O — User I/O pin (bank 3) |
| Контакт 45 | I/O — User I/O pin (bank 3) |
| Контакт 46 | I/O — User I/O pin (bank 3) |
| Контакт 47 | I/O — User I/O pin (bank 3) |
| Контакт 48 | I/O — User I/O pin (bank 3) |
| Контакт 49 | I/O — User I/O pin (bank 3) |
| Контакт 50 | I/O — User I/O pin (bank 3) |
| Контакт 51 | GND — Ground |
| Контакт 52 | I/O — User I/O pin (bank 4) |
| Контакт 53 | I/O — User I/O pin (bank 4) |
| Контакт 54 | I/O — User I/O pin (bank 4) |
| Контакт 55 | I/O — User I/O pin (bank 4) |
| Контакт 56 | I/O — User I/O pin (bank 4) |
| Контакт 57 | I/O — User I/O pin (bank 4) |
| Контакт 58 | I/O — User I/O pin (bank 4) |
| Контакт 59 | I/O — User I/O pin (bank 4) |
| Контакт 60 | I/O — User I/O pin (bank 4) |
| Контакт 61 | I/O — User I/O pin (bank 4) |
| Контакт 62 | I/O — User I/O pin (bank 4) |
| Контакт 63 | I/O — User I/O pin (bank 4) |
| Контакт 64 | I/O — User I/O pin (bank 4) |
| Контакт 65 | I/O — User I/O pin (bank 4) |
| Контакт 66 | I/O — User I/O pin (bank 4) |
| Контакт 67 | GND — Ground |
| Контакт 68 | I/O — User I/O pin (bank 5) |
| Контакт 69 | I/O — User I/O pin (bank 5) |
| Контакт 70 | I/O — User I/O pin (bank 5) |
| Контакт 71 | I/O — User I/O pin (bank 5) |
| Контакт 72 | I/O — User I/O pin (bank 5) |
| Контакт 73 | I/O — User I/O pin (bank 5) |
| Контакт 74 | I/O — User I/O pin (bank 5) |
| Контакт 75 | I/O — User I/O pin (bank 5) |
| Контакт 76 | I/O — User I/O pin (bank 5) |
| Контакт 77 | I/O — User I/O pin (bank 5) |
| Контакт 78 | I/O — User I/O pin (bank 5) |
| Контакт 79 | I/O — User I/O pin (bank 5) |
| Контакт 80 | I/O — User I/O pin (bank 5) |
| Контакт 81 | GND — Ground |
| Контакт 82 | I/O — User I/O pin (bank 6) |
| Контакт 83 | I/O — User I/O pin (bank 6) |
| Контакт 84 | I/O — User I/O pin (bank 6) |
| Контакт 85 | I/O — User I/O pin (bank 6) |
| Контакт 86 | I/O — User I/O pin (bank 6) |
| Контакт 87 | I/O — User I/O pin (bank 6) |
| Контакт 88 | I/O — User I/O pin (bank 6) |
| Контакт 89 | I/O — User I/O pin (bank 6) |
| Контакт 90 | I/O — User I/O pin (bank 6) |
| Контакт 91 | I/O — User I/O pin (bank 6) |
| Контакт 92 | I/O — User I/O pin (bank 6) |
| Контакт 93 | I/O — User I/O pin (bank 6) |
| Контакт 94 | I/O — User I/O pin (bank 6) |
| Контакт 95 | I/O — User I/O pin (bank 6) |
| Контакт 96 | I/O — User I/O pin (bank 6) |
| Контакт 97 | I/O — User I/O pin (bank 6) |
| Контакт 98 | I/O — User I/O pin (bank 6) |
| Контакт 99 | I/O — User I/O pin (bank 6) |
| Контакт 100 | I/O — User I/O pin (bank 6) |
Типичное применение
5M570ZT100I5N подходит для 7 применениеs: Industrial Control Bus Decoding, Motor Drive Interface Glue, Microcontroller I/O Expansion, Power Supply Sequencing Controller, FPGA Configuration Supervisor, Address Latch and Chip-Select Generation, Building Automation Controllers.
Industrial Control Bus Decoding
The 5M570ZT100I5N's 9 ns propagation delay and 440 macrocells make it well suited to decode industrial bus addresses, chip-select signals, and interrupt steering logic. The 100-pin TQFP provides 79 user I/O, sufficient to fan out to multiple peripheral chips on a PLC backplane. With industrial -40C to +100C temperature rating, it operates reliably inside factory automation cabinets and process-control enclosures where ambient swings are routine.
Рекомендуется
Motor Drive Interface Glue
Motor-drive systems require fast deterministic glue logic for fault latching, PWM blanking, and Hall-sensor decoding. The 5M570ZT100I5N delivers 9 ns tPD, supporting encoder feedback processing at 1-2 MHz line rates without timing slip. Its 1.8 V core with MultiVolt 3.3 V/5 V I/O banks interfaces directly to gate-driver logic inputs, while the industrial temperature grade handles under-hood thermal stress in motor-cabinet applications.
Рекомендуется
Microcontroller I/O Expansion
When a microcontroller runs out of GPIO or needs specialized timing, the 5M570ZT100I5N can offload PWM generation, quadrature decoding, or keypad scanning. Its flash-backed non-volatile configuration boots in under 1 ms with no external bitstream, simplifying the cold-start path. The 8 dedicated clock pins allow multiple independent timing domains to coexist on a single device, replacing discrete 74HC logic with a smaller footprint.
Рекомендуется
Power Supply Sequencing Controller
The 5M570ZT100I5N's instant-on flash memory enables it to be live before any host processor or FPGA, sequencing multi-rail power supplies with deterministic timing. Its 440 macrocells can implement PG (power-good) fanout, fault aggregation, and re-try logic without external glue. The 1.8 V core draws modest quiescent current, making it a low-overhead supervisor for server, telecom, and industrial power trees.
Рекомендуется
FPGA Configuration Supervisor
Pair the 5M570ZT100I5N with a Cyclone V or Stratix 10 FPGA to handle configuration memory loading, watchdog reset, and dual-boot arbitration. The MAX V device can hold a backup bitstream in an external flash and trigger reconfiguration if it detects an FPGA watchdog timeout. With 9 ns timing, it reacts faster than a microcontroller-based supervisor and avoids single-point-of-failure in boot paths.
Рекомендуется
Address Latch and Chip-Select Generation
Legacy microcontrollers and DSPs often require multiplexed address/data bus demultiplexing and chip-select fanout - a perfect job for the 5M570ZT100I5N's 440 macrocells. The 9 ns tPD easily meets 30-50 MHz external memory bus timing with comfortable margin, while the MultiVolt I/O banks bridge between 1.8 V core and 3.3 V/5 V peripheral interfaces. Industrial temperature rating supports outdoor and cabinet-mounted designs.
Рекомендуется
Building Automation Controllers
Building automation systems - HVAC, lighting, access control - rely on the 5M570ZT100I5N for protocol bridging between BACnet, Modbus, and proprietary field buses. Its 570 logic elements implement stack framing, CRC, and address filtering deterministically. The industrial temperature range covers unconditioned mechanical rooms and rooftop enclosures, while the 100-pin TQFP is easy to hand-prototype and rework.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для 5M570ZT100I5N — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | 5M570ZT100C5N | 5M570ZT100A5N | 5M570ZT100C4N | 5M570ZF256I5N |
|---|---|---|---|---|---|
| Brand | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) |
| Package | TQFP-100 (14x14 mm) | TQFP-100 (14x14 mm) - same | TQFP-100 (14x14 mm) - same | TQFP-100 (14x14 mm) - same | FBGA-256 - different package |
| Operating Temperature | -40C to +100C (Industrial) | 0C to +85C (Commercial) | -40C to +125C (Automotive) | 0C to +85C (Commercial) | -40C to +100C (Industrial) |
| Logic Elements | 570 | 570 | 570 | 570 | 570 |
| Macrocells | 440 | 440 | 440 | 440 | 440 |
| Propagation Delay (tPD) | 9 ns (speed grade -5) | 9 ns (speed grade -5) | 9 ns (speed grade -5) | 10 ns (speed grade -4, slower) | 9 ns (speed grade -5) |
| Core Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| Configuration Memory | Flash (non-volatile) | Flash (non-volatile) | Flash (non-volatile) | Flash (non-volatile) | Flash (non-volatile) |
Ключевые отличия
- Industrial temperature range without automotive cost premium (против 5M570ZT100A5N)
- Speed grade -5 (9 ns tPD) versus slower -4 grade (против 5M570ZT100C4N)
- TQFP-100 footprint is hand-rework friendly (против 5M570ZM100I5N)
Заметки по проектированию
The MAX V 5M570ZT100I5N requires a clean 1.8 V core supply plus the per-bank MultiVolt rails (1.8/2.5/3.3/5.0 V). Per the MAX V datasheet, place a 100 nF ceramic decoupling capacitor as close as possible to every VCCINT/GND pair, plus a 10 uF bulk capacitor per voltage domain near the device. Estimated: at 100% toggle activity on 79 I/O at 100 MHz, the device draws roughly 100-150 mA from VCCINT; derate supplies accordingly and verify with worst-case design simulation.
Follow the TQFP-100 land pattern specified in the MAX V package guidelines (0.5 mm pitch, 14 x 14 mm body). Use a 4-layer stack-up with continuous ground plane beneath the device to provide a low-impedance return path for high-speed switching I/O. Estimated: lead inductance on a properly designed TQFP-100 land is approximately 2-3 nH per pin, which is acceptable for signals up to 100 MHz when paired with adequate decoupling.
Do not mix voltage levels on a single I/O bank - all pins in a bank must share the same VCCIO supply. Failure to observe this will cause input-voltage mismatch and potential long-term reliability degradation. Also, the JTAG TCK pin should be pulled to a known state (typically high through a 10 kohm resistor) to prevent unintended entry into boundary-scan mode at power-up.
For I/O signals above 50 MHz, use controlled-impedance routing (typically 50 ohm single-ended) and avoid stubs. The MAX V 5M570Z output edge rate is approximately 1-2 ns; signal integrity analysis is recommended for clock and high-speed control signals above 100 MHz. Series termination may be required when driving traces longer than approximately 50 mm or capacitive loads above 15 pF.
Информация о соответствии
RoHS and REACH compliant per Intel product declaration. Industrial temperature grade; not AEC-Q100 qualified - choose 5M570ZT100A5N for automotive.
