EP1810JI-45 - 48-Macrocell UV PLD, 33.3 MHz, 68-pin JLCC | Altera
Référence : EP1810JI-45 ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $18.5 | $18,50 |
| 10 | $16.2 | $162,00 |
| 100 | $13.85 | $1 385,00 |
| 500 | $11.4 | $5 700,00 |
| 1 000 | $9.75 | $9 750,00 |
EP1810JI-45 Présentation
An EPLD (Erasable Programmable Logic Device) is a non-volatile programmable logic IC that uses EPROM/EEPROM cells to retain its logic configuration. EPLDs belong to the broader PLD family (programmable logic device), which sits alongside FPGAs, CPLDs, and SPLDs in the programmable logic hierarchy. Unlike SRAM-based FPGAs, EPLDs retain their bitstream without external memory, simplifying board design and providing instant-on behavior.
Key features of the EP1810JI-45 include 48 macrocells for combinational and registered logic, 33.3 MHz fMAX, 50 ns tPD, J-bend surface-mount terminals, and an industrial temperature range of -40 °C to +85 °C. The architecture integrates a programmable AND/OR array with feedback paths, enabling efficient implementation of state machines, decoders, and glue logic.
The EP1810 series uses Altera's Classic EPLD architecture, which combines high-density macrocells with predictable timing that is independent of routing density. Each macrocell contains a programmable flip-flop and configurable output polarity, and the device is programmed via the Altera Master Programming Unit or compatible third-party programmers using the JEDEC fuse-map format.
Typical applications include industrial control glue logic, address decoding in 8086/68000 microprocessor systems, bus interface adapters, state-machine controllers, and legacy replacement of discrete 74LS TTL logic. The wide 5 V supply tolerance and TTL-compatible I/O simplify integration into existing 5 V designs that require deterministic timing.
When designing with the EP1810JI-45, note that it is a UV-erasable/OTP device - in-window ceramic parts require a UV eraser for reprogramming. Designers should also confirm programming algorithm support with current Altera (now Intel FPGA) tools, as the Classic EPLD family predates modern Quartus support. For new designs, the MAX series CPLDs are recommended successors.
This page synthesizes distributor pricing, same-family drop-in alternatives, and pinout notes not found in the manufacturer datasheet - designed to help engineers source, replace, and qualify the EP1810JI-45 for both production and legacy maintenance.
Alternatives de remplacement direct pour EP1810JI-45 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec EP1810JI-45 (même facteur de forme et même empreinte) — différant par Technology, Operating Temperature, Mounting Type, Family, Package.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
EP1810JI-35
✅ Remplacement direct✓ En stock
$18.6 / unité
Voir la fiche technique →EP1810JC-45
✅ Remplacement direct✓ En stock
$21.1 / unité
Voir la fiche technique →EP1810JC-35
✅ Remplacement direct✓ En stock
$5.48 / unité
Voir la fiche technique →EP1810JC-25
✅ Remplacement direct✓ En stock
$6.8 / unité
Voir la fiche technique →EP1810GI-45
✅ Remplacement direct✓ En stock
$56.4 / unité
Voir la fiche technique →EP1810GM883B
✅ Remplacement direct✓ En stock
$125.4 / unité
Voir la fiche technique →EP1810JI-45 Valeurs maximales et caractéristiques électriques
| Manufacturer | Altera (now Intel FPGA) |
| Series | Classic EPLD Family |
| Device Type | UV-Erasable / OTP Complex PLD |
| Macrocell Count | 48 |
| Maximum Operating Frequency | 33.3 MHz |
| Propagation Delay (tPD) | 50 ns |
| Configurable I/O Lines | 48 |
| Dedicated Inputs | 12 |
| Technology | CMOS EPROM |
| Package Code | QCCJ |
| Package Type | 68-pin JLCC (J-leaded ceramic chip carrier) |
| Terminal Form | J BEND |
| Package Shape | SQUARE |
| Number of Terminals | 68 |
| Temperature Grade | INDUSTRIAL |
| Température de fonctionnement | -40 °C to +85 °C |
| Tension d'alimentation | 5 V (TTL compatible) |
| Programming Method | UV-erase (windowed) / OTP via JEDEC |
Configuration des broches de EP1810JI-45
| Broche 1 | GND — Ground |
| Broche 2 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 3 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 4 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 5 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 6 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 7 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 8 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 9 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 10 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 11 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 12 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 13 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 14 | GND — Ground |
| Broche 15 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 16 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 17 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 18 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 19 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 20 | VCC — +5 V supply |
| Broche 21 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 22 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 23 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 24 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 25 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 26 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 27 | GND — Ground |
| Broche 28 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 29 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 30 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 31 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 32 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 33 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 34 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 35 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 36 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 37 | VCC — +5 V supply |
| Broche 38 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 39 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 40 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 41 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 42 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 43 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 44 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 45 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 46 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 47 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 48 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 49 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 50 | GND — Ground |
| Broche 51 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 52 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 53 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 54 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 55 | I/O — Configurable I/O pin (macrocell-driven) |
| Broche 56 | IN — Dedicated input pin |
| Broche 57 | IN — Dedicated input pin |
| Broche 58 | IN — Dedicated input pin |
| Broche 59 | IN — Dedicated input pin |
| Broche 60 | IN — Dedicated input pin |
| Broche 61 | IN — Dedicated input pin |
| Broche 62 | IN — Dedicated input pin |
| Broche 63 | IN — Dedicated input pin |
| Broche 64 | IN — Dedicated input pin |
| Broche 65 | IN — Dedicated input pin |
| Broche 66 | IN — Dedicated input pin |
| Broche 67 | IN — Dedicated input pin |
| Broche 68 | VCC — +5 V supply |
Applications typiques
EP1810JI-45 convient pour 6 applications: Microprocessor Address Decoding, Industrial Control Glue Logic, Bus Interface Adapter Logic, Legacy TTL Logic Replacement, State Machine Controllers, Aerospace and Defense Avionics Interfaces.
Microprocessor Address Decoding
The EP1810JI-45 is well suited to address decoding in 8086, 68000, and similar 16-bit microprocessor systems. Its 48 macrocells can implement complex decode maps with chip-select outputs, while the 50 ns tPD provides comfortable margin against typical 8 MHz 8086 bus cycles (125 ns). With 48 I/O pins and 12 dedicated inputs, the device can decode multi-bank memory maps and generate multiple peripheral chip-selects in a single package, replacing several discrete 74LS138/74LS139 decoders. The TTL-compatible 5 V I/O interfaces directly to legacy microprocessor buses, and the deterministic tPD eliminates the timing variability found in PAL/GAL-based designs.
Recommandé
Industrial Control Glue Logic
The EP1810JI-45 excels in industrial control designs that require deterministic glue logic between microcontrollers, sensors, and actuators. Its industrial -40 °C to +85 °C temperature range and 5 V TTL I/O make it a drop-in for PLC backplanes, motor controller boards, and instrumentation front-ends. The 50 ns tPD is more than sufficient for sub-microsecond control loops, and the 48-macrocell capacity can implement state machines, encoder quadrature decoders, and watchdog timers in a single device. Designers appreciate the predictable timing - unlike SRAM FPGAs, the EP1810JI-45's tPD does not vary with routing density, simplifying worst-case timing analysis in safety-critical industrial equipment.
Recommandé
Bus Interface Adapter Logic
The EP1810JI-45 is commonly used as a bus interface adapter between legacy ISA, VME, or proprietary backplane buses. With 48 I/O lines, it can bridge 8/16-bit data buses, generate wait-state timing, and implement bus arbitration handshakes. The 33.3 MHz maximum frequency easily handles ISA's 8.33 MHz bus and slower VME transactions, while the deterministic 50 ns tPD guarantees compliant setup/hold timing. The 5 V TTL I/O matches the bus voltage levels directly without level shifters. When designing bus adapters, allocate macrocells for state-machine-based protocol engines and use the device's feedback paths to implement multi-cycle handshake sequences.
Recommandé
Legacy TTL Logic Replacement
The EP1810JI-45 is widely deployed to consolidate discrete 74LS and 74ALS TTL glue logic into a single programmable device. A typical design may replace 5-15 TTL packages (74LS00, 74LS74, 74LS151, 74LS153, 74LS174, 74LS374, etc.) with one EP1810JI-45, reducing board area, power consumption, and inventory SKUs. The 48 macrocells provide ample capacity for these consolidations, and the predictable tPD simplifies timing closure. This is one of the highest-value applications for the EP1810JI-45 in maintenance of legacy industrial and aerospace systems where original TTL parts are increasingly hard to source at reasonable cost.
Recommandé
State Machine Controllers
The EP1810JI-45 is ideal for FSM (finite state machine) implementations in protocol engines, sequencers, and control logic. Each macrocell contains a programmable flip-flop with configurable output polarity, making state register implementation straightforward. The deterministic 50 ns tPD guarantees state-transition timing regardless of state encoding complexity, a key advantage over SRAM-based FPGAs where tPD varies with placement. A single EP1810JI-45 can implement state machines with 8-32 states plus associated output decode, covering most protocol engines, sequencers, and encoder/decoder logic in industrial, automotive, and telecom applications.
Recommandé
Aerospace and Defense Avionics Interfaces
The EP1810JI-45 and its /883B military-screened sibling EP1810GM883B are used in aerospace and defense applications including MIL-STD-1553 interface logic, ARINC 429 bus adapters, and avionics display controllers. The /883B processing provides -55 °C to +125 °C military temperature range plus extended reliability screening, suitable for flight-critical designs. The 48 macrocells can implement protocol encoding/decoding, bus monitoring, and discrete I/O expansion for legacy avionics. Designers value the deterministic timing - critical when validating to DO-254 design assurance levels - and the long-term data retention of EPROM technology compared to SRAM FPGAs which require continuous configuration.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour EP1810JI-45 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | EP1810JI-35 | EP1810JC-45 | EP1810JC-35 | EP1810JC-25 | EP1810GI-45 | EP1810GM883B |
|---|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | 68-pin JLCC (QCCJ) | 68-pin JLCC (QCCJ) - same | 68-pin PLCC | 68-pin PLCC | 68-pin PLCC | 68-pin PGA | 68-pin PGA |
| Macrocell Count | 48 | 48 | 48 | 48 | 48 | 48 | 48 |
| Propagation Delay (tPD) | 50 ns | 35 ns | 50 ns | 35 ns | 25 ns | 50 ns | 50 ns |
| Maximum Frequency (fMAX) | 33.3 MHz | 40 MHz | 33.3 MHz | 40 MHz | 50 MHz | 33.3 MHz | 33.3 MHz |
| Temperature Grade | INDUSTRIAL (-40 to +85 °C) | INDUSTRIAL | INDUSTRIAL | INDUSTRIAL | INDUSTRIAL | INDUSTRIAL | MILITARY (-55 to +125 °C) |
| Configurable I/O Lines | 48 | 48 | 48 | 48 | 48 | 48 | 48 |
| Dedicated Inputs | 12 | 12 | 12 | 12 | 12 | 12 | 12 |
| Technology | CMOS EPROM (UV-erasable) | CMOS EPROM (UV-erasable) | CMOS EPROM (UV-erasable) | CMOS EPROM (UV-erasable) | CMOS EPROM (UV-erasable) | CMOS EPROM (UV-erasable) | CMOS EPROM (UV-erasable, MIL-883 screened) |
Principaux différenciateurs
- J-leaded ceramic chip carrier (JLCC) for high-reliability industrial applications (vs EP1810JC-45)
- Industrial temperature grade (-40 °C to +85 °C) with deterministic 50 ns tPD (vs EP1810GM883B)
- Same JEDEC-standard 68-pin footprint as the entire EP1810 family (vs MAX II EPM240T100C5N)
Notes de conception
The EP1810JI-45 is UV-erasable through a quartz window on the top of the ceramic JLCC package. If the window is covered with an opaque label or damaged, erasure will fail. For one-time programming (OTP), simply do not erase after programming - the EPROM cells retain the bitstream. Newer designs should not assume modern Quartus tool support: use MAX+PLUS II or compatible legacy tools only.
Estimated: At VCC = 5.5 V maximum, fMAX = 33.3 MHz, and 100% I/O toggling, the EP1810JI-45 dissipates approximately 0.6 W. With the 68-pin JLCC ceramic package and typical industrial airflow, junction temperature rise is approximately 25 °C above ambient. Within the -40 to +85 °C industrial range this is acceptable, but designers should still provide adequate ground pins (4 GND pins in this package) and keep ceramic packages away from high-temperature sources.
When laying out a 68-pin JLCC footprint for EP1810JI-45, follow JEDEC standard MS-018 with 1.27 mm (0.050 inch) lead pitch. Use a socket for prototyping (e.g., 68-pin PGA-to-PLCC adapter or Aries 68-pin JLCC socket) so that UV-erase and reprogramming cycles are possible without desoldering. Always place decoupling capacitors (0.1 µF ceramic in parallel with 10 µF tantalum) within 5 mm of each VCC pin to suppress switching noise on the 5 V supply.
Informations de conformité
EP1810JI-45 is a ceramic JLCC part with tin-lead (SnPb) terminal finish and is therefore NOT RoHS compliant by default. Some -45 variants may be available with lead-free finishes through special-order channels; verify with the specific distributor before sourcing. REACH compliance is unknown - ceramic JLCC packages typically do not contain REACH SVHCs above threshold, but the EPROM die materials should be verified. AEC-Q100 is not applicable as this is an industrial/aerospace programmable logic IC, not an automotive-grade part.
