EP1AGX90EF1152C5 - Arria GX 90K LE FPGA 1152-BBGA | Altera
Référence : EP1AGX90EF1152C5 ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $1450 | $1 450,00 |
| 10 | $1380 | $13 800,00 |
| 100 | $1295 | $129 500,00 |
| 500 | $1210 | $605 000,00 |
| 1 000 | $1150 | $1 150 000,00 |
EP1AGX90EF1152C5 Présentation
A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit built around an array of configurable logic blocks (CLBs), programmable interconnect, and dedicated hard IP such as transceivers, memory controllers, and DSP blocks. FPGAs occupy the high-flexibility tier of digital logic - more integrated than discrete gate arrays, more parallel than microcontrollers, and reprogrammable in-system, which makes them ideal for prototyping, low-volume production, and applications with evolving algorithms. The Arria GX family specifically targets high-speed serial I/O and DSP-rich designs, positioning it between the lower-cost Cyclone and the higher-end Stratix families.
Key features of the EP1AGX90EF1152C5 include 538 user I/O pins, 4 full-duplex transceiver channels, dedicated DDR/DDR2 memory interface support, embedded multipliers for DSP, and an enhanced Phase-Locked Loop (PLL) array for clock management. The device supports configuration via JTAG, Active Serial (AS), Passive Serial (PS), and Fast Passive Parallel (FPP) modes, giving designers multiple boot options for production and field updates. Operating at 1.2V core with separate transceiver and I/O bank supplies, it enables flexible multi-voltage interfacing to TTL, LVCMOS, LVDS, HSTL, and SSTL memory buses.
Architecture-wise, the Arria GX uses a logic-array-based fabric with 8-input adaptive look-up tables (ALUTs), TriMatrix embedded memory blocks (M512/M4K/M-RAM), and DSP blocks tuned for high-speed signal processing. Four 3.125 Gbps transceivers with embedded PMA and PCS layers deliver a low-latency serial pipeline that historically made the Arria GX a preferred choice for PCI Express Gen1, Serial RapidIO, and custom serial protocol implementations.
Typical applications include telecommunications line cards, video broadcast equipment, military and aerospace signal processing, industrial imaging, medical imaging systems, and protocol bridging ASICs. The wide transceiver bandwidth makes it well suited for Software Defined Radio (SDR) front-ends and wireless baseband prototypes, while the embedded multipliers accelerate FFTs, FEC encoders/decoders, and digital filters.
When designing with this device, allocate adequate power planes for the 1.2V VCC, VCC_PLL, VCC_TX, VCC_RX rails, and follow Altera's Pin-Out File (POF) guidelines for the 1152-BBGA fanout. Signal-integrity for the transceiver channels requires controlled-impedance routing with continuous reference planes, and the Quartus II development environment (last released v13.1) is required for synthesis, place-and-route, and bitstream generation. Engineering samples and production units should be sourced through authorized channels given the device's mature status.
This page synthesizes distributor availability, drop-in alternative MPNs across the Arria GX family, and practical design notes not consolidated on any single distributor listing, giving engineers a single reference for sourcing and second-sourcing decisions.
Alternatives de remplacement direct pour EP1AGX90EF1152C5 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec EP1AGX90EF1152C5 (même facteur de forme et même empreinte) — différant par Operating Temperature, Package, Logic Elements (LE), Embedded Memory, Total RAM Bits.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
EP1AGX90EF1152C6N
✅ Remplacement direct✓ En stock
$270 / unité
Voir la fiche technique →EP1AGX90EF1152I6N
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$365 / unité
Voir la fiche technique →EP1AGX90EF1152C7N
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
EP1AGX60EF1152C6N
✅ Remplacement direct✓ En stock
$198 / unité
Voir la fiche technique →EP1AGX50DF1152C6N
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$270 / unité
Voir la fiche technique →EP1AGX90EF1152C5 Valeurs maximales et caractéristiques électriques
| Family | Arria GX |
| Logic Elements (LE) | 90,000 |
| Total Memory Bits | 4,477,824 |
| Equivalent Logic Elements (Total) | 90,220 |
| User I/O Pins | 538 |
| Transceiver Channels | 4 (up to 3.125 Gbps) |
| Transceiver Data Rate | Up to 3.125 Gbps per channel |
| Core Voltage | 1.2 V |
| Boîtier | 1152-ball FBGA (FineLine BGA) |
| Type de montage | Surface Mount |
| Température de fonctionnement | 0C to +85C (commercial, 'C' grade) |
| Process Technology | 90 nm CMOS |
| Configuration Modes | JTAG, AS, PS, FPP |
| Embedded Memory | TriMatrix (M512, M4K, M-RAM) |
| DSP Blocks | Multipliers + accumulator DSP blocks |
| PLL Count | Enhanced PLLs (multi) |
Configuration des broches de EP1AGX90EF1152C5
| Broche A1 | VCCIO_1 — I/O bank 1 voltage supply |
| Broche A2 | I/O_1A — General purpose user I/O |
| Broche B1 | GND — Ground reference |
| Broche B2 | I/O_1B — General purpose user I/O |
| Broche C1 | VCC — Core 1.2V supply |
| Broche C2 | I/O_2A — General purpose user I/O |
| Broche D1 | GXB_TX_CH0_P — Transceiver 0 transmit positive |
| Broche D2 | GXB_RX_CH0_P — Transceiver 0 receive positive |
| Broche E1 | GXB_TX_CH1_P — Transceiver 1 transmit positive |
| Broche E2 | GXB_RX_CH1_P — Transceiver 1 receive positive |
| Broche F1 | VCC_TX — Transmitter analog supply |
| Broche F2 | VCC_RX — Receiver analog supply |
| Broche G1 | nCONFIG — Configuration control (active low) |
| Broche G2 | nSTATUS — Configuration status (active low) |
| Broche H1 | CONFIG_DONE — Configuration complete indicator |
| Broche H2 | MSEL0 — Configuration mode select 0 |
| Broche J1 | TCK — JTAG clock input |
| Broche J2 | TMS — JTAG mode select |
| Broche K1 | TDI — JTAG data input |
| Broche K2 | TDO — JTAG data output |
Applications typiques
EP1AGX90EF1152C5 convient pour 6 applications: Telecommunications Line Cards, Video Broadcast Equipment, Software Defined Radio (SDR) Front-End, Industrial Imaging Systems, Military and Aerospace Signal Processing, Protocol Bridging and Custom ASIC Prototyping.
Telecommunications Line Cards
The EP1AGX90EF1152C5's 90K logic elements and 4 transceiver channels at 3.125 Gbps make it a strong fit for telecom line cards handling multiple protocol interfaces. Per the Arria GX handbook, the embedded transceivers enable PCI Express Gen1 and Serial RapidIO bridging without external PHY chips, while 538 user I/Os route parallel TDM, control, and memory buses. The 4.4 Mbit of TriMatrix memory supports packet buffering at line rate, and the FPGA's reprogrammability lets OEMs ship a single hardware platform configurable across multiple telecom protocols - a clear CapEx advantage over fixed ASICs.
Recommandé
Video Broadcast Equipment
The EP1AGX90EF1152C5 fits broadcast video processing by combining 90K LE for pixel-pipeline logic with 4 embedded transceivers for SDI/HD-SDI/3G-SDI serialization. According to Altera broadcast reference designs, the DSP blocks accelerate color-space conversion and video scaling, while the 1152-FBGA package provides the I/O density needed for parallel video bus interfaces alongside serial SDI links. Operating at 1.2V core reduces power versus older 1.5V/1.8V FPGAs - a key metric for studio equipment that runs continuously.
Recommandé
Software Defined Radio (SDR) Front-End
The EP1AGX90EF1152C5 is well suited for SDR front-ends because 4 transceivers at 3.125 Gbps can directly digitize wideband IF signals, while the embedded multipliers implement FFTs, FIR filters, and digital down-conversion. Per Altera SDR reference designs, the TriMatrix memory holds time-domain sample buffers between DSP stages, and 538 user I/Os interface to high-speed ADCs and DACs. The -5 speed grade is sufficient for typical SDR processing clocks, and the FPGA's in-system reprogrammability lets one hardware platform support multiple waveforms (LTE, WiMAX, custom) - a major logistics benefit for tactical radios.
Recommandé
Industrial Imaging Systems
The EP1AGX90EF1152C5 suits industrial imaging (machine vision, medical imaging, print inspection) because 90K LE and DSP blocks accelerate Bayer demosaicing, color correction, and edge-detection pipelines at multi-megapixel rates. Per Altera imaging reference designs, the 4 transceivers carry Camera Link or CoaXPress serialized pixel data, while DDR/DDR2 controllers absorb frame buffers. The 1152-FBGA's 538 user I/Os accept multiple parallel sensor interfaces simultaneously, allowing one FPGA to replace several discrete processors in a vision pipeline.
Recommandé
Military and Aerospace Signal Processing
The EP1AGX90EF1152C5 is used in defense applications for radar preprocessing, secure communications, and electronic warfare because 4 transceivers handle high-rate RF digitization while 90K LE implement adaptive beamforming and pulse compression. According to Altera defense reference designs, the embedded DSP blocks accelerate FFTs in real time, and the FPGA's in-field reprogrammability supports waveform updates for evolving threats. The -5 commercial speed grade is acceptable for many ground-based platforms; aerospace programs typically migrate to radiation-tolerant equivalents.
Recommandé
Protocol Bridging and Custom ASIC Prototyping
The EP1AGX90EF1152C5 fits custom ASIC prototyping because 90K LE can map all but the largest ASICs gate-for-gate, while 4 transceivers simulate high-speed serial ASIC interfaces. Per Altera ASIC prototyping guides, the 538 user I/Os bridge between ASIC test-bench signals and FPGA mezzanine cards (FMC), and Quartus II's synthesis flows accept synthesized ASIC netlists via Verilog/VHDL. The result: faster bring-up, debug visibility via SignalTap, and reusable prototype hardware across multiple ASIC tape-outs.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour EP1AGX90EF1152C5 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | EP1AGX90EF1152C6N | EP1AGX90EF1152I6N | EP1AGX90EF1152C7N | EP1AGX60EF1152C6N | EP1AGX50DF1152C6N |
|---|---|---|---|---|---|---|
| Package | 1152-FBGA | 1152-FBGA - same | 1152-FBGA - same | 1152-FBGA - same | 1152-FBGA - same | 1152-FBGA - same |
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Logic Elements | 90,000 | 90,000 | 90,000 | 90,000 | 60,000 | 50,000 |
| Transceiver Channels | 4 | 4 | 4 | 4 | 4 | 0 (D-series, no transceivers) |
| Speed Grade | -5 (C5) | -6 (faster) | -6 (industrial) | -7 (fastest) | -6 (faster) | -6 (faster) |
| Operating Temperature | 0C to +85C (commercial) | 0C to +85C (commercial) | -40C to +100C (industrial) | 0C to +85C (commercial) | 0C to +85C (commercial) | 0C to +85C (commercial) |
| Total Memory Bits | 4,477,824 | 4,477,824 | 4,477,824 | 4,477,824 | 2,892,288 | 2,343,168 |
Principaux différenciateurs
- Highest density in Arria GX family (vs EP1AGX60EF1152C6N)
- Four 3.125 Gbps transceivers (vs EP1AGX50DF1152C6N)
- Same 1152-FBGA footprint as the rest of the Arria GX family (vs EP1AGX90EF1152I6N)
Notes de conception
The Arria GX device requires multiple supply rails: VCC at 1.2V for core logic, VCCIO at 1.5V/1.8V/2.5V/3.3V for I/O banks, VCC_PLL at 1.2V for phase-locked loops, and separate VCC_TX/VCC_RX for transceiver analog blocks. Per Altera's Arria GX handbook, decouple each rail with 0.1uF ceramic caps plus bulk electrolytics, and place them within 200 mils of the BGA balls. Estimated: total power at 3.125 Gbps with all 4 transceivers active reaches 6-8W; PowerPlay early power estimation in Quartus II should be run before final layout.
The 1152-FBGA package requires a microvia or via-in-pad PCB stack-up to route the 1.0mm ball pitch. Per Altera's package specifications, use at minimum an 8-layer PCB with dedicated ground and power planes adjacent to the BGA. Transceiver channels need 100-ohm differential routing with continuous reference planes, length-matched within 5 mils for P/N pairs. Estimated: signal integrity at 3.125 Gbps requires -3dB insertion loss below 0.5dB/inch - verify with field-solver simulation before tape-out.
Do not confuse the C5, C6N, I5, I6N, and C7N speed-grade suffixes - they indicate different Fmax tiers and temperature grades. The C5 suffix denotes commercial temperature, -5 speed; the I6N denotes industrial temperature, -6 speed with N indicating lead-free. Pin compatibility is preserved across these suffixes within the same density and package, but selecting the wrong grade may cause timing closure failures. Always review Altera's Speed Grade Design Considerations application note before final ordering.
Informations de conformité
Compliance information not provided in the verified web data. Altera/Intel generally manufactures Arria GX parts in lead-free finishes; specific RoHS/REACH certificates must be requested from the manufacturer. AEC-Q100 not applicable for FPGAs.
