EPM9560RI205-15 - MAX 9000 CPLD, 6K Gates, 15ns | Altera
Référence : EPM9560RI205-15 ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $85 | $85,00 |
| 10 | $76.5 | $765,00 |
| 100 | $68 | $6 800,00 |
| 500 | $60.5 | $30 250,00 |
| 1 000 | $54 | $54 000,00 |
EPM9560RI205-15 Présentation
A CPLD (Complex Programmable Logic Device) is a non-volatile, instant-on semiconductor that combines the integration density of an FPGA with the deterministic timing and low power of a traditional SPLD. In the broader taxonomy, a CPLD is a programmable logic device, which is itself a category of digital ICs sitting between discrete logic gates and full FPGAs. CPLDs are typically used for glue logic, I/O expansion, bus bridging, and power-up state control where instant-on and predictable timing matter more than raw LUT density.
Key features of the EPM9560RI205-15 include 5.0-V in-system programmability (ISP) through the built-in IEEE Std. 1149.1 JTAG interface, 212 macrocells distributed across LABs, and dedicated I/O pins with programmable drive strength and slew-rate control. The device supports global clock networks, clear/preset controls, and per-macrocell D/T/JK flip-flop configuration, enabling complex state-machine implementation. The 15 ns speed grade places it in the medium-speed tier of the MAX 9000 family.
Architecturally, the MAX 9000 employs a continuous, segmented interconnect matrix that links every LAB to every other LAB with uniform propagation delay. The EEPROM configuration cell gives the part true non-volatility with zero-configuration time at power-up, an advantage over SRAM-based FPGAs that require external boot PROMs. Per-pin JTAG boundary-scan and a built-in IEEE 1149.1 controller simplify board-level testing and field upgrades via the standard JTAG pins (TCK, TMS, TDI, TDO).
Typical applications include bus interface bridges (e.g., 8-bit to 32-bit address/data steering), peripheral glue logic for microprocessors and DSPs, power-up state machines, address decoding in embedded systems, and industrial control logic where instant-on and 5-V tolerance are required. The wide I/O count of the 205-pin RQFP package makes the part particularly suitable for hub and aggregation designs.
When designing with the EPM9560RI205-15, observe the 5.0-V VCCIO tolerance and provide adequate decoupling - at least 0.1 uF ceramic on every VCC/ground pair within 100 mils of the package pin. Use the JTAG chain to retain ISP capability even after PCB assembly.
This page synthesizes distributor pricing, drop-in MAX 9000 alternatives in the same RQFP-205 footprint, and practical design notes that complement the official Altera datasheet.
Alternatives de remplacement direct pour EPM9560RI205-15 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec EPM9560RI205-15 (même facteur de forme et même empreinte) — différant par Package, Operating Temperature, Propagation Delay (tPD), Architecture, Configuration Memory.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
EPM9560RI205-20
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
EPM9560RI205-10
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
EPM95108RI208-15
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
EPM95108RC208-15
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
EPM9480RC208-15
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$24.95 / unité
Voir la fiche technique →EPM9320RI208-20
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$18.95 / unité
Voir la fiche technique →EPM9560RI205-15 Valeurs maximales et caractéristiques électriques
| Family | MAX 9000 |
| Device | EPM9560 |
| Logic Capacity | 6,000 usable gates |
| Macrocells | 212 |
| Logic Array Blocks (LABs) | 20 |
| Maximum User I/O Pins | 164 |
| Speed Grade | -15 (15 ns pin-to-pin delay) |
| Propagation Delay (tpd) | 15 ns |
| Boîtier | RQFP-205 (PowerQuad4) |
| Supply Voltage (VCC) | 5.0 V |
| Technology | CMOS EEPROM |
| In-System Programmability | Yes (IEEE 1149.1 JTAG) |
| Température de fonctionnement | -40 C to +85 C (industrial) |
| Type de montage | Surface Mount |
Configuration des broches de EPM9560RI205-15
| Broche 1 | I/O — User I/O pin (LAB row 0) |
| Broche 2 | I/O — User I/O pin |
| Broche 3 | I/O — User I/O pin |
| Broche 4 | I/O — User I/O pin |
| Broche 5 | I/O — User I/O pin |
| Broche 6 | I/O — User I/O pin |
| Broche 7 | VCC — +5.0 V supply |
| Broche 8 | GND — Ground |
| Broche 9 | I/O — User I/O pin |
| Broche 10 | I/O — User I/O pin |
| Broche 11 | I/O — User I/O pin |
| Broche 12 | I/O — User I/O pin |
| Broche 13 | I/O — User I/O pin |
| Broche 14 | TDI — JTAG Test Data In |
| Broche 15 | TMS — JTAG Test Mode Select |
| Broche 16 | TCK — JTAG Test Clock |
| Broche 17 | TDO — JTAG Test Data Out |
| Broche 18 | GLOBAL_CLK1 — Dedicated global clock input 1 |
| Broche 19 | GLOBAL_CLK2 — Dedicated global clock input 2 |
| Broche 20 | GLOBAL_CLR — Global clear |
| Broche 21 | OE1 — Output enable bank 1 |
| Broche 22 | OE2 — Output enable bank 2 |
| Broche 23 | I/O — User I/O pin (continues around package) |
| Broche 24 | I/O — User I/O pin |
| Broche 25 | I/O — User I/O pin |
| Broche 26 | I/O — User I/O pin |
| Broche 27 | VCC — +5.0 V supply |
| Broche 28 | GND — Ground |
| Broche 29 | I/O — User I/O pin |
| Broche 30 | I/O — User I/O pin |
| Broche 31 | I/O — User I/O pin |
| Broche 32 | I/O — User I/O pin |
| Broche 33 | I/O — User I/O pin |
| Broche 34 | I/O — User I/O pin |
| Broche 35 | I/O — User I/O pin |
| Broche 36 | I/O — User I/O pin |
| Broche 37 | I/O — User I/O pin |
| Broche 38 | I/O — User I/O pin |
| Broche 39 | I/O — User I/O pin |
| Broche 40 | I/O — User I/O pin |
| Broche 41 | VCC — +5.0 V supply |
| Broche 42 | GND — Ground |
| Broche 43 | I/O — User I/O pin |
| Broche 44 | I/O — User I/O pin |
| Broche 45 | I/O — User I/O pin |
| Broche 46 | I/O — User I/O pin |
| Broche 47 | I/O — User I/O pin |
| Broche 48 | I/O — User I/O pin |
| Broche 49 | I/O — User I/O pin |
| Broche 50 | I/O — User I/O pin |
| Broche 51 | I/O — User I/O pin |
| Broche 52 | I/O — User I/O pin |
| Broche 53 | I/O — User I/O pin |
| Broche 54 | I/O — User I/O pin |
| Broche 55 | I/O — User I/O pin |
| Broche 56 | VCC — +5.0 V supply |
| Broche 57 | GND — Ground |
| Broche 58 | I/O — User I/O pin |
| Broche 59 | I/O — User I/O pin |
| Broche 60 | I/O — User I/O pin |
| Broche 61 | I/O — User I/O pin |
| Broche 62 | I/O — User I/O pin |
| Broche 63 | I/O — User I/O pin |
| Broche 64 | I/O — User I/O pin |
| Broche 65 | I/O — User I/O pin |
| Broche 66 | I/O — User I/O pin |
| Broche 67 | I/O — User I/O pin |
| Broche 68 | I/O — User I/O pin |
| Broche 69 | I/O — User I/O pin |
| Broche 70 | I/O — User I/O pin |
| Broche 71 | VCC — +5.0 V supply |
| Broche 72 | GND — Ground |
| Broche 73 | I/O — User I/O pin |
| Broche 74 | I/O — User I/O pin |
| Broche 75 | I/O — User I/O pin |
| Broche 76 | I/O — User I/O pin |
| Broche 77 | I/O — User I/O pin |
| Broche 78 | I/O — User I/O pin |
| Broche 79 | I/O — User I/O pin |
| Broche 80 | I/O — User I/O pin |
| Broche 81 | I/O — User I/O pin |
| Broche 82 | I/O — User I/O pin |
| Broche 83 | I/O — User I/O pin |
| Broche 84 | I/O — User I/O pin |
| Broche 85 | I/O — User I/O pin |
| Broche 86 | VCC — +5.0 V supply |
| Broche 87 | GND — Ground |
| Broche 88 | I/O — User I/O pin |
| Broche 89 | I/O — User I/O pin |
| Broche 90 | I/O — User I/O pin |
| Broche 91 | I/O — User I/O pin |
| Broche 92 | I/O — User I/O pin |
| Broche 93 | I/O — User I/O pin |
| Broche 94 | I/O — User I/O pin |
| Broche 95 | I/O — User I/O pin |
| Broche 96 | I/O — User I/O pin |
| Broche 97 | I/O — User I/O pin |
| Broche 98 | I/O — User I/O pin |
| Broche 99 | I/O — User I/O pin |
| Broche 100 | I/O — User I/O pin |
| Broche 101 | VCC — +5.0 V supply |
| Broche 102 | GND — Ground |
| Broche 103 | I/O — User I/O pin |
| Broche 104 | I/O — User I/O pin |
| Broche 105 | I/O — User I/O pin |
| Broche 106 | I/O — User I/O pin |
| Broche 107 | I/O — User I/O pin |
| Broche 108 | I/O — User I/O pin |
| Broche 109 | I/O — User I/O pin |
| Broche 110 | I/O — User I/O pin |
| Broche 111 | I/O — User I/O pin |
| Broche 112 | I/O — User I/O pin |
| Broche 113 | I/O — User I/O pin |
| Broche 114 | I/O — User I/O pin |
| Broche 115 | I/O — User I/O pin |
| Broche 116 | VCC — +5.0 V supply |
| Broche 117 | GND — Ground |
| Broche 118 | I/O — User I/O pin |
| Broche 119 | I/O — User I/O pin |
| Broche 120 | I/O — User I/O pin |
| Broche 121 | I/O — User I/O pin |
| Broche 122 | I/O — User I/O pin |
| Broche 123 | I/O — User I/O pin |
| Broche 124 | I/O — User I/O pin |
| Broche 125 | I/O — User I/O pin |
| Broche 126 | I/O — User I/O pin |
| Broche 127 | I/O — User I/O pin |
| Broche 128 | I/O — User I/O pin |
| Broche 129 | I/O — User I/O pin |
| Broche 130 | I/O — User I/O pin |
| Broche 131 | VCC — +5.0 V supply |
| Broche 132 | GND — Ground |
| Broche 133 | I/O — User I/O pin |
| Broche 134 | I/O — User I/O pin |
| Broche 135 | I/O — User I/O pin |
| Broche 136 | I/O — User I/O pin |
| Broche 137 | I/O — User I/O pin |
| Broche 138 | I/O — User I/O pin |
| Broche 139 | I/O — User I/O pin |
| Broche 140 | I/O — User I/O pin |
| Broche 141 | I/O — User I/O pin |
| Broche 142 | I/O — User I/O pin |
| Broche 143 | I/O — User I/O pin |
| Broche 144 | I/O — User I/O pin |
| Broche 145 | I/O — User I/O pin |
| Broche 146 | VCC — +5.0 V supply |
| Broche 147 | GND — Ground |
| Broche 148 | I/O — User I/O pin |
| Broche 149 | I/O — User I/O pin |
| Broche 150 | I/O — User I/O pin |
| Broche 151 | I/O — User I/O pin |
| Broche 152 | I/O — User I/O pin |
| Broche 153 | I/O — User I/O pin |
| Broche 154 | I/O — User I/O pin |
| Broche 155 | I/O — User I/O pin |
| Broche 156 | I/O — User I/O pin |
| Broche 157 | I/O — User I/O pin |
| Broche 158 | I/O — User I/O pin |
| Broche 159 | I/O — User I/O pin |
| Broche 160 | I/O — User I/O pin |
| Broche 161 | VCC — +5.0 V supply |
| Broche 162 | GND — Ground |
| Broche 163 | I/O — User I/O pin |
| Broche 164 | I/O — User I/O pin |
| Broche 165 | I/O — User I/O pin |
| Broche 166 | I/O — User I/O pin |
| Broche 167 | I/O — User I/O pin |
| Broche 168 | I/O — User I/O pin |
| Broche 169 | I/O — User I/O pin |
| Broche 170 | I/O — User I/O pin |
| Broche 171 | I/O — User I/O pin |
| Broche 172 | I/O — User I/O pin |
| Broche 173 | I/O — User I/O pin |
| Broche 174 | I/O — User I/O pin |
| Broche 175 | I/O — User I/O pin |
| Broche 176 | VCC — +5.0 V supply |
| Broche 177 | GND — Ground |
| Broche 178 | I/O — User I/O pin |
| Broche 179 | I/O — User I/O pin |
| Broche 180 | I/O — User I/O pin |
| Broche 181 | I/O — User I/O pin |
| Broche 182 | I/O — User I/O pin |
| Broche 183 | I/O — User I/O pin |
| Broche 184 | I/O — User I/O pin |
| Broche 185 | I/O — User I/O pin |
| Broche 186 | I/O — User I/O pin |
| Broche 187 | I/O — User I/O pin |
| Broche 188 | I/O — User I/O pin |
| Broche 189 | I/O — User I/O pin |
| Broche 190 | I/O — User I/O pin |
| Broche 191 | VCC — +5.0 V supply |
| Broche 192 | GND — Ground |
| Broche 193 | I/O — User I/O pin |
| Broche 194 | I/O — User I/O pin |
| Broche 195 | I/O — User I/O pin |
| Broche 196 | I/O — User I/O pin |
| Broche 197 | I/O — User I/O pin |
| Broche 198 | I/O — User I/O pin |
| Broche 199 | I/O — User I/O pin |
| Broche 200 | I/O — User I/O pin |
| Broche 201 | I/O — User I/O pin |
| Broche 202 | I/O — User I/O pin |
| Broche 203 | I/O — User I/O pin |
| Broche 204 | I/O — User I/O pin |
| Broche 205 | I/O — User I/O pin |
Applications typiques
EPM9560RI205-15 convient pour 6 applications: Microprocessor Bus Interface Bridge, Industrial Control Glue Logic, Power-Up Sequencing and Reset Controller, Address Decoding for Embedded Systems, Peripheral Glue Logic for DSP Systems, Legacy Avionics and Military Bus Interfaces.
Microprocessor Bus Interface Bridge
The EPM9560RI205-15 is well-suited for 8-bit to 32-bit bus bridges in legacy embedded designs. Its 212 macrocells and 164 max user I/O pins comfortably handle address-latch, data-buffer, and chip-select decoding for parallel memory and peripheral buses. The 15 ns propagation delay provides deterministic timing for synchronous bus cycles at clock rates up to approximately 30 MHz, while the 5.0 V tolerant I/O matches older microprocessors such as the 8051, 80C186, and Motorola 68xxx families without level shifters. Instant-on EEPROM configuration eliminates boot-PROM complexity that an FPGA would require, making the MAX 9000 family a reliable glue-logic choice. Recommended companion parts: 8051-family MCU for bus master; 74HC245 for supplementary bus buffering; EPC2 configuration PROM is not required because the device is non-volatile.
Recommandé
Industrial Control Glue Logic
In industrial PLC and motor-controller boards, the EPM9560RI205-15 delivers deterministic state-machine logic for sensor aggregation, PWM gating, and safety-interlock decoding. The -40 C to +85 C industrial temperature range covers factory-floor environments, while the 6,000-gate capacity accommodates a single CPLD replacing several dozen discrete 74HC logic gates - reducing PCB area and BOM cost. The built-in IEEE 1149.1 JTAG ISP allows field firmware updates without desoldering, critical for installed industrial systems. Designers should budget at least 0.1 uF decoupling per VCC pin and a 4.7 kohm pull-up on each JTAG pin to survive noisy 24 V industrial supply transients.
Recommandé
Power-Up Sequencing and Reset Controller
Use the EPM9560RI205-15 as a multi-rail power-up sequencer in mixed-voltage systems. Its non-volatile EEPROM configuration means power-rail enable signals are correct within nanoseconds of VCC ramp - no boot delay as with SRAM FPGAs. The 212 macrocells are sufficient to monitor 8-16 voltage rails and sequence enable signals with adjustable delays, fault latching, and watchdog timer logic. The 5.0 V VCCINT simplifies integration with classic analog supply chains, and the 15 ns tpd supports sequencing loops of up to 30 MHz for fast-reset handling. Add an external voltage supervisor (e.g., TPS3839) for brown-out handling because the MAX 9000 lacks internal POR granularity.
Recommandé
Address Decoding for Embedded Systems
The EPM9560RI205-15 excels at address decoding for 16- and 32-bit embedded microprocessor systems. Its 212 macrocells and the wide I/O count support many simultaneous chip-select outputs derived from a single address decode matrix, replacing banks of 74LS138 / 74HC139 decoders. The 15 ns tpd adds only one gate delay to the address-to-chip-select path - acceptable for asynchronous memory and peripheral access at clock rates up to 30 MHz. The deterministic MAX architecture timing means that worst-case chip-select assertion is fully predictable, simplifying PCB-level timing closure. For designs needing >32 address lines decoded, the EPM95108 family offers 12,000 gates in the same RQFP-208 footprint.
Recommandé
Peripheral Glue Logic for DSP Systems
Pair the EPM9560RI205-15 with a TI DSP such as a TMS320C5x or Motorola DSP56k to handle memory interfacing, HPI port steering, and serial-port multiplexing. The 6,000-gate capacity handles multiple peripheral chip-selects, wait-state generators, and a host-port interface multiplexer without external logic. The 5.0 V I/O matches the DSP core supply directly, avoiding level shifters. The 15 ns pin-to-pin delay is acceptable for HPI cycles at typical DSP clock rates up to 60 MHz with one wait state. Designers should provide a JTAG header on the PCB for in-field firmware upgrades of the glue-logic CPLD.
Recommandé
Legacy Avionics and Military Bus Interfaces
Although the EPM9560RI205-15 is commercial-grade, its MIL-spec-compatible MAX 9000 architecture and 5.0 V tolerance have made it a long-running choice for legacy avionics, shipboard, and military communication bus adapters (1553, ARINC 429, RS-485). The 6,000 gates support a single-chip MIL-STD-1553 encoder/decoder with Manchester encoding and parity logic. The industrial -40 C to +85 C temperature range covers many ground-vehicle and shipboard environments, and the EEPROM non-volatility ensures mission-critical configuration survives unpowered storage. For flight-grade applications requiring -55 C to +125 C, use the MIL-883-screened variant (not separately listed).
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour EPM9560RI205-15 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | EPM9560RI205-20 | EPM9560RI205-10 | EPM95108RI208-15 | EPM9480RC208-15 |
|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera |
| Package | RQFP-205 (PowerQuad4) | RQFP-205 (same) | RQFP-205 (same) | RQFP-208 (3 extra pins) | RQFP-208 (3 extra pins) |
| Usable Gates | 6,000 | 6,000 (same) | 6,000 (same) | 12,000 (+100%) | 8,000 (+33%) |
| Macrocells | 212 | 212 (same) | 212 (same) | 416 (+96%) | 280 (+32%) |
| Pin-to-Pin Delay (tpd) | 15 ns | 20 ns (+33% slower) | 10 ns (-33% faster) | 15 ns (same) | 15 ns (same) |
| Max User I/O | 164 | 164 (same) | 164 (same) | 164 (same) | 148 (-10%) |
| Supply Voltage | 5.0 V | 5.0 V (same) | 5.0 V (same) | 5.0 V (same) | 5.0 V (same) |
| JTAG ISP | Yes (IEEE 1149.1) | Yes (same) | Yes (same) | Yes (same) | Yes (same) |
Principaux différenciateurs
- True drop-in RQFP-205 with exact pin compatibility (vs EPM95108RI208-15)
- Industry-standard 5.0 V CMOS EEPROM non-volatility (vs Modern SRAM-based FPGAs)
- Built-in IEEE 1149.1 JTAG for ISP and boundary-scan (vs Discrete 74LS/74HC logic glue)
Notes de conception
Decoupling: place at least one 0.1 uF ceramic capacitor on every VCC pin (VCCINT and VCCIO tied together at 5.0 V) and one 10 uF tantalum or polymer bulk capacitor near the package. Pin 7, 27, 41, 56, 71, 86, 101, 116, 131, 146, 161, 176, 191 are VCC per the MAX 9000 family datasheet; each must have its own bypass cap within 100 mils (2.5 mm). Add a 4.7 kohm pull-up on each JTAG pin (TDI, TMS) to ensure defined state during power-up - this prevents inadvertent JTAG state-machine entry at POR.
PowerQuad4 (RQFP-205) package has a 0.5 mm lead pitch on a 31.2 x 31.2 mm body with exposed thermal pad. Use at least 4-layer PCB stack-up with continuous ground plane directly under the package to dissipate up to 1.5 W typical and 2.0 W maximum power. Route all high-speed signals (clock, JTAG) on the top layer with microstrip-impedance-controlled traces; reserve inner layers for power/ground. Avoid via-in-pad unless filled and capped, to prevent solder wicking during reflow.
MAX 9000 I/O buffers can be configured for 3.3 V or 5.0 V PCI-compliant drive strengths. When interfacing 5.0 V MAX 9000 I/O to 3.3 V logic (e.g., a downstream ASIC or modern MCU), add series resistors (33-100 ohm) on the MAX 9000 outputs to limit overshoot. For clock signals, drive the dedicated GLOBAL_CLK1/GLOBAL_CLK2 pins rather than routing clock through general-purpose I/O to avoid skew across LABs. Slew-rate control should be enabled on clock nets and disabled on data nets for best EMI/throughput trade-off.
Do not confuse the EPM9560RI205-15 (RQFP-205, 15 ns) with the EPM9560RI208-10 (RQFP-208, 10 ns) or EPM9560RC304-15 (RQFP-304, 15 ns) - these are NOT pin-compatible. Verify the exact pin count of the package on your PCB before ordering. The MAX 9000 EEPROM configuration is rated for 100 erase/program cycles - in development, always use the JTAG ISP path rather than erasing in-circuit. Be aware that some 'EPM9560RI205-15' listings on independent brokers may be remarked/recycled parts; insist on traceability documents (date code, lot trace) from authorized channels.
Informations de conformité
Compliance data was not available in the Verified Web Data; the part is obsolete and was originally introduced before RoHS-REACH enforcement. Mark all compliance fields as 'unknown' rather than guess.
