IRFR4620TRLPBF - 200V 24A N-Ch MOSFET, 78mOhm, DPAK | Infineon
Référence : IRFR4620TRLPBF ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $2.72 | $2,72 |
| 10 | $2.45 | $24,50 |
| 100 | $2.18 | $218,00 |
| 500 | $1.95 | $975,00 |
| 1 000 | $1.72 | $1 720,00 |
IRFR4620TRLPBF Présentation
A power MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) is a voltage-controlled switch used for power conversion, motor control, and load management. Within the semiconductor taxonomy, MOSFETs are a subset of discrete transistors, which sit under power semiconductors and ultimately under discrete semiconductors. The DPAK (TO-252) package is a surface-mount variant of the TO-220 through-hole package, optimized for high-current applications where PCB thermal copper area replaces a discrete heatsink.
Key features include a 200 V VDS rating that supports 120/230 VAC rectified offline applications, an RDS(on) of 78 mOhm at 10 V VGS for low conduction losses, and a continuous drain current of 24 A at case temperature. The device is also rated for 144 W power dissipation at Tc. The TO-252AA (DPAK) package offers a low thermal resistance path through the drain tab to PCB copper, enabling compact designs.
The IRFR4620TRLPBF uses Infineon's IR MOSFET technology with a planar cell structure optimized for low on-resistance per unit area. The 200 V rating with 78 mOhm RDS(on) places this part in the sweet spot for medium-power offline converters, where avalanche ruggedness and switching losses must be balanced against conduction efficiency. The gate charge of 25 nC allows moderate-frequency operation in the 50-200 kHz range commonly used in SMPS topologies.
Typical applications include DC-DC converters in telecom and server power supplies, motor drive circuits in industrial automation, battery management systems, and load switches in power distribution. The 200 V rating also supports PFC boost stages and synchronous rectification in offline SMPS designs.
When designing with this device, ensure adequate PCB copper area for thermal dissipation. The DPAK package relies on the drain tab as the primary thermal path - a minimum of 1 square inch of 2 oz copper is recommended for full 24 A operation. Use a gate resistor of 10-100 Ohm to control switching transients.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer datasheet alone.
Alternatives de remplacement direct pour IRFR4620TRLPBF — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec IRFR4620TRLPBF (même facteur de forme et même empreinte) — différant par Technology, Operating Temperature Range, Drain-Source Voltage (VDS), MSL Level, Package.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
IRFR4620TRPBF
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
IRFR4620PBF
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
AUIRFR4620TRL
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
IRFR2405TRLPBF
✅ Remplacement direct✓ En stock
$0.55 / unité
Voir la fiche technique →IRFR9120NTRLPBF
✅ Remplacement direct✓ En stock
$0.61 / unité
Voir la fiche technique →VBE1206N
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
IRFR4620TRLPBF Valeurs maximales et caractéristiques électriques
| Manufacturer | Infineon Technologies |
| Part Number | IRFR4620TRLPBF |
| Type de transistor | N-Channel MOSFET |
| Drain-Source Voltage (VDS) | 200 V |
| Continuous Drain Current (ID) | 24 A at Tc |
| On-Resistance (RDS(on)) | 78 mOhm max at VGS=10V |
| Gate Charge (Qg) | 25 nC typical |
| Power Dissipation (PD) | 144 W at Tc |
| Technology | IR MOSFET |
| Boîtier / Format | TO-252AA (DPAK) |
| Type de montage | Surface Mount |
| Température de fonctionnement | -55C to +175C |
| Lead Free | Yes |
| Statut RoHS | Compliant |
| Niveau MSL | 1 (Unlimited) |
Configuration des broches de IRFR4620TRLPBF
| Broche 1 | Gate — Gate control input (VGS drive) |
| Broche 2 | Drain — Drain connection (also tied to package tab for thermal) |
| Broche 3 | Source — Source connection |
Zone de fonctionnement sûr (SOA) - DC
Applications typiques
IRFR4620TRLPBF convient pour 6 applications: Offline PFC Boost Converter, Primary-Side Flyback Switch, DC Motor Drive / H-Bridge, Battery Management / Load Switch, Synchronous Rectifier (Low-Side), Solar Inverter / MPPT Switch.
Offline PFC Boost Converter
The IRFR4620TRLPBF fits offline PFC boost stages because its 200 V VDS rating provides sufficient headroom for 120 VAC rectified (170 V peak) and 230 VAC rectified (325 V peak with derating) line inputs. The 78 mOhm RDS(on) at VGS=10V keeps conduction losses low in continuous conduction mode operation. Its 25 nC gate charge supports switching frequencies in the 50-100 kHz PFC range, balancing efficiency and magnetics size. Compared to using a 600 V MOSFET, the 200 V rating allows a smaller die and lower RDS(on), reducing both conduction and switching losses.
Recommandé
Primary-Side Flyback Switch
The IRFR4620TRLPBF serves as the primary-side MOSFET in isolated flyback converters for industrial and consumer SMPS. The 200 V VDS comfortably exceeds the maximum reflected voltage from a 24 V output flyback running off universal mains input. The 24 A continuous current rating supports power levels up to approximately 150 W depending on thermal design. The DPAK package's drain tab enables direct PCB copper heatsinking without external thermal management.
Recommandé
DC Motor Drive / H-Bridge
The IRFR4620TRLPBF can be configured as a half-bridge or full-bridge switch for DC motor speed control in industrial automation. The 200 V VDS rating supports 48 V and 96 V DC bus systems, while the 78 mOhm RDS(on) keeps I2R losses low during PWM operation. The 24 A rating enables control of motors up to approximately 1 kW without paralleling devices. The TO-252AA (DPAK) package is well suited for compact motor driver boards where the drain tab is soldered directly to a copper heatsink area on the PCB.
Recommandé
Battery Management / Load Switch
The IRFR4620TRLPBF functions as a high-side or low-side load switch in 48 V battery management systems for telecom and energy storage. The 200 V VDS provides ample margin above the maximum 48 V battery stack voltage plus transients. The 78 mOhm RDS(on) at 24 A continuous supports high-current disconnect applications. The TO-252 package with exposed drain tab enables reliable thermal performance in space-constrained BMS boards.
Recommandé
Synchronous Rectifier (Low-Side)
The IRFR4620TRLPBF can serve as a synchronous rectifier on the low-side of buck or forward converters where 200 V is sufficient margin. The 78 mOhm RDS(on) is competitive with Schottky diode forward drops at high currents, improving efficiency. The 25 nC gate charge keeps dead-time and body-diode conduction losses low in 100-200 kHz converters. Its DPAK footprint allows it to be paralleled with companion parts for higher current applications.
Recommandé
Solar Inverter / MPPT Switch
The IRFR4620TRLPBF works as the switching element in solar MPPT (Maximum Power Point Tracking) converters for residential and small commercial inverters. The 200 V VDS rating handles open-circuit voltages from typical 60-cell or 72-cell PV panel strings. The 24 A continuous current supports power levels up to approximately 3 kW per MPPT channel. The TO-252AA (DPAK) package is widely accepted in outdoor power electronics for its robustness and through-the-tab thermal dissipation.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour IRFR4620TRLPBF — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | IRFR4620TRPBF | IRFR4620PBF | AUIRFR4620TRL | VBE1206N |
|---|---|---|---|---|---|
| Brand | Infineon | Infineon | Infineon | Infineon | VBsemi |
| Package | TO-252AA (DPAK) | TO-252AA (DPAK) | TO-252AA (DPAK) | TO-252AA (DPAK) | TO-252 (DPAK) |
| VDS Rating | 200 V | 200 V | 200 V | 200 V | 200 V |
| RDS(on) max @10V | 78 mOhm | 78 mOhm | 78 mOhm | 78 mOhm | 55 mOhm |
Principaux différenciateurs
- AEC-Q101 automotive qualification option in same package (vs AUIRFR4620TRL)
- Lower RDS(on) than original in same package (vs VBE1206N)
- Strict drop-in pin-compatibility across multiple reel codes (vs IRFR4620TRPBF / IRFR4620PBF)
Notes de conception
Estimated: at 24 A continuous with RDS(on) of 78 mOhm, conduction losses are approximately P = I^2 * R = 24^2 * 0.078 = 44.9 W. The DPAK package relies on the drain tab as the primary thermal path. The Infineon datasheet specifies RthJC below 1 C/W and RthJA of 50 C/W on 1 sq inch of 2 oz copper. For continuous 24 A operation, a minimum of 1.5 sq inches of 2 oz copper on the drain tab is recommended, or use an external heatsink clipped to the tab. Without adequate heatsinking, the part will thermally limit at significantly lower currents.
Place the gate drive components within 25 mm of the gate pin to minimize gate-loop inductance. Use a 10 Ohm gate resistor for switching speeds up to 200 kHz; reduce to 4.7 Ohm for faster edges if EMI is acceptable. Keep the source return path direct and wide - the source current path shares the gate drive return, and any inductance in this path causes gate-source voltage spikes that can exceed VGS rating. Add a 100 nF ceramic bypass capacitor between VCC and ground as close as possible to the gate driver supply pin.
Do not exceed the maximum VGS rating of +/-20 V, which is commonly violated during switching transients on long gate-drive traces. Add a 10 kOhm resistor from gate to source to ensure the MOSFET stays off if the gate driver loses power. The body diode of the IRFR4620 has limited reverse recovery characteristics - for hard-switched bridge topologies, consider an external Schottky or a MOSFET with better body diode performance. Do not parallel this part without adequate thermal balancing or matching per the datasheet.
Informations de conformité
RoHS compliant and lead-free per Infineon product page. Standard variant is not AEC-Q100 qualified; choose AUIRFR4620TRL for AEC-Q101 automotive applications.
