M1AFS600-2FGG256 - Fusion 600K-Gate Mixed-Signal FPGA | Microchip
Référence : M1AFS600-2FGG256 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1 000 | $0 | $0,00 |
M1AFS600-2FGG256 Présentation
A mixed-signal FPGA is a field-programmable gate array that integrates programmable digital logic with analog peripherals on a single monolithic die. Within the power-management IC hierarchy, the Fusion family sits above pure digital FPGAs by combining configurable analog inputs, large flash memory blocks, and clock generation and management circuitry with flash-based programmable logic, replacing discrete analog components in many system-control designs.
Key features include flash-based (non-volatile) configuration - no external boot PROM is required and the configuration data is inherently secure and instant-on - plus integrated analog peripherals, comprehensive on-chip clock generation and management, and monolithic integration of logic, memory, and analog functions. The 130nm flash process gives it a different cost and security profile versus SRAM FPGAs from Xilinx or Altera of the same era.
Architecturally, the Fusion fabric is built from VersaTiles, the flash-based logic element of the Actel/Microsemi ProASIC lineage, surrounded by flash memory blocks and an analog subsystem with a dedicated analog multiplexer and front-end for board-level monitoring such as voltage, current, and temperature sensing. This makes the device well suited to implementing complete power-supply supervision and system-management logic in one chip.
Typical applications include system power management and sequencing, smart battery charging, clock generation and distribution management, motor control, and embedded system controllers where programmable logic must interface directly with analog board telemetry.
A key design consideration is supply architecture: the 1.5V core and I/O bank voltages must be sequenced per the manufacturer datasheet, and the FG256 ball map must be respected when migrating between Fusion family members in the same package.
This page synthesizes distributor listing data, same-package drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet. Pricing is quoted on request (as of 2026-09-02).
Alternatives de remplacement direct pour M1AFS600-2FGG256 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec M1AFS600-2FGG256 (même facteur de forme et même empreinte) — différant par Family, Package, System Gates, Process Technology, RoHS Status.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
M1AFS600-2FG256
✅ Remplacement direct✓ En stock
$46.75 / unité
Voir la fiche technique →M1AFS600-FGG484I
✅ Remplacement direct✓ En stock
$128.4 / unité
Voir la fiche technique →M1AFS1500-FG256I
✅ Remplacement direct✓ En stock
$341.46 / unité
Voir la fiche technique →M1AFS1500-1FGG256I
✅ Remplacement direct✓ En stock
$136.9 / unité
Voir la fiche technique →M1AFS250-2FG256I
✅ Remplacement direct✓ En stock
Contactez-nous pour le prix
Voir la fiche technique →M1AFS250-2FGG256I
✅ Remplacement direct✓ En stock
$83.12 / unité
Voir la fiche technique →M7AFS600-FGG256
✅ Remplacement direct✓ En stock
$232.4 / unité
Voir la fiche technique →M1AFS600-2FGG256 Valeurs maximales et caractéristiques électriques
| Family | Fusion (M1) Mixed-Signal FPGA |
| System Gates | 600K |
| User I/O | 119 |
| Programmable Resources (DigiKey listing) | 110592 |
| Process Technology | 130 nm |
| Core Supply Voltage | 1.5 V |
| Maximum Frequency | 1470.59 MHz |
| Configuration Technology | Flash-based (non-volatile) |
| Boîtier | 256-LBGA (FBGA / FG256) |
| Type de montage | Surface Mount |
| Analog Peripherals | Integrated configurable analog subsystem |
| On-chip Memory | Large flash memory blocks |
| Clock Management | On-chip clock generation and management circuitry |
Guide de configuration des broches du M1AFS600-2FGG256 256-lbga (fbga / fg256)
Configuration des broches du M1AFS600-2FGG256 (boîtier 256-lbga (fbga / fg256)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour M1AFS600-2FGG256.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
M1AFS600-2FGG256 convient pour 6 applications: System Power Management and Sequencing, Smart Battery Charging and Management, Clock Generation and Distribution Management, Motor Control, Embedded System Controllers, Secure and Instant-On Logic Migration.
System Power Management and Sequencing
The M1AFS600-2FGG256 was purpose-built for power management, according to the Microsemi Fusion Family datasheet, which names power management as a primary application area previously served by discrete analog components. Its integrated configurable analog subsystem with front-end multiplexer monitors multiple rail voltages directly, while the 600K-gate flash fabric implements sequencing state machines with deterministic instant-on startup because configuration is stored in on-chip flash. The 119 user I/O drive power-good flags, enable signals, and fault interrupts. Placed as the board's power supervisor, it replaces a microcontroller plus several analog monitor ICs, cutting BOM count; the trade-off is that its 1.5V core rail itself must be sequenced correctly at power-up.
Recommandé
Smart Battery Charging and Management
For smart battery chargers, the M1AFS600-2FGG256 combines the analog monitoring channels needed to sense battery voltage, pack current, and temperature with enough programmable logic to implement charging algorithms, safety cutoffs, and communication interfaces in one monolithic chip. The Fusion datasheet explicitly lists smart battery charging as a target application where Fusion replaces costly discrete analog or mixed-signal ASIC solutions. Flash-based configuration means the charger supervisory logic is active the moment power is applied - important for fault handling during insertion events. With 110592 listed programmable resource units and 119 I/O, one device can manage charger control plus host communication; designers should budget analog channel accuracy per datasheet specifications.
Recommandé
Clock Generation and Distribution Management
The Fusion family integrates comprehensive clock generation and management circuitry on the same die as the programmable fabric, and the M1AFS600-2FGG256 uses this to centralize board clock control: the fabric reconfigures clock multiplexing, enables, and monitoring at runtime while the on-chip clock management block conditions the distribution. The datasheet lists clock generation and management as a core application, noting that the maximum operating frequency reaches 1470.59 MHz for internal functions per listing data. Using one M1AFS600 as a clock supervisor replaces discrete PLL-glue logic and reduces a class of timing faults caused by unmonitored clock trees. The design consideration is that flash-based fabric lacks the high-speed serial transceivers of SRAM FPGAs, so it supervises rather than generates GHz-class serial clocks.
Recommandé
Motor Control
Motor control is named in the Fusion Family datasheet as a key application area, and the M1AFS600-2FGG256 fits it by pairing PWM-generation logic in the 600K-gate fabric with analog sensing of motor phase currents, bus voltage, and heatsink temperature through the integrated analog front-end. Flash-based startup ensures the motor controller is ready before the drive stage enables, an important safety property for traction and industrial drives. The 119 user I/O provide gate-drive interfaces, encoder inputs, and fault feedback channels. Compared with a discrete MCU plus gate driver solution, the FPGA fabric allows fully custom commutation schemes and multi-axis coordination; the trade-off is higher static power than a small MCU at equivalent control complexity.
Recommandé
Embedded System Controllers
As an embedded system controller, the M1AFS600-2FGG256 implements housekeeping logic - board telemetry, fan control, hot-swap supervision, front-panel interfaces - alongside general glue logic in one non-volatile device. The monolithic integration of configurable analog, large flash memory blocks, and programmable logic described on the Microchip M1AFS600 product page eliminates the external boot flash and supervisor chips that SRAM FPGA designs require, improving boot reliability and configuration security. With 110592 listed resource units and 119 I/O, the device consolidates functions that would otherwise consume several ICs. It is especially attractive for industrial and communications line cards that need instant-on behavior; designers should verify I/O bank voltage compatibility with the surrounding logic before finalizing the schematic.
Recommandé
Secure and Instant-On Logic Migration
Because the M1AFS600-2FGG256 stores configuration in on-chip flash on a 130nm process, it serves designs where configuration bitstream security and instant-on operation matter more than cutting-edge fabric speed - for example defense-adjacent industrial equipment, telecom supervisory logic, and legacy ProASIC-lineage redesigns. Unlike SRAM FPGAs from Xilinx or Altera that load configuration from an external PROM at each power-up (exposing the bitstream on the bus), the Fusion device keeps its configuration internal. The 600K-gate fabric with 119 I/O typically absorbs the glue logic, bus bridging, and analog monitoring of the systems being migrated. Note that FPGA family migration between vendors is a full redesign - within Fusion, same-package FG256 parts swap pin-to-pin.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour M1AFS600-2FGG256 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | M1AFS600-2FG256 | M1AFS1500-FG256I | M1AFS250-2FGG256I |
|---|---|---|---|---|
| Brand | Microchip Technology (Microsemi/Actel Fusion) | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 256-LBGA (FG256) | 256-LBGA (FG256) - same | 256-LBGA (FG256) - same | 256-LBGA (FG256) - same |
| System Gates | 600K | 600K | 1.5M | 250K |
| Speed Grade | -2 | -2 | standard | -2 |
| Core Supply Voltage | 1.5 V | 1.5 V | 1.5 V | 1.5 V |
| Configuration Technology | Flash-based (non-volatile) | Flash-based | Flash-based | Flash-based |
| Analog Subsystem | Integrated configurable analog | Yes | Yes | Yes |
Principaux différenciateurs
- Integrated analog subsystem eliminates external monitoring ICs (vs A3P600-2FG256I)
- 150% more fabric in the same footprint when upgrading (vs M1AFS1500-FG256I)
- Non-volatile flash configuration vs SRAM competitors (vs Xilinx/Altera SRAM FPGAs)
Notes de conception
The M1AFS600-2FGG256 requires a 1.5V core supply plus I/O bank rails per the Fusion Family datasheet. Follow the datasheet power-up sequencing requirements - flash-based Fusion parts specify rail sequencing to guarantee reliable configuration at power-on. Because the device is instant-on, downstream circuits enabled by FPGA I/O see active signals almost immediately; add deliberate enable gating in the fabric if peripheral turn-on must be delayed until rails stabilize. Estimated: budget core current per the datasheet power calculator in Libero SoC rather than assuming a fixed value, since consumption depends heavily on toggle rates.
The 256-ball LBGA (FG256, typically 17x17 mm footprint class) requires a standard BGA land pattern with via-in-pad or dogbone fanout; follow the Microsemi/Microchip PCB layout guidelines in the Fusion datasheet. Decouple each supply domain with bulk capacitance at the regulator plus 0.1 uF ceramics distributed at the ball field. Analog inputs of the integrated subsystem should be routed away from switching-regulator nodes and referenced to a clean analog ground island to preserve monitoring accuracy.
Do not treat FG256 and FG484 Fusion packages as interchangeable - despite family pin compatibility, ball count and footprint differ, so M1AFS600-FGG484I parts cannot be reflowed onto an FG256 board. Note also the family exception documented in the Fusion product brief: same-package pin compatibility does not extend to PQ208 devices (AFS250 vs AFS600). Finally, FG versus FGG suffixes denote standard vs RoHS lead-free ball finish - confirm which finish your assembly process requires before ordering.
Informations de conformité
The FGG suffix in Microchip/Microsemi numbering conventionally denotes lead-free (RoHS) ball finish, but explicit compliance status for this MPN was not stated in the provided data; verify on the Microchip product page.
