PIC16LF76T-I/ML - 8-bit 20MHz MCU, 14KB Flash, 28-QFN | Microchip
Référence : PIC16LF76T-I/ML ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $6.2 | $6,20 |
| 10 | $5.58 | $55,80 |
| 100 | $4.95 | $495,00 |
| 500 | $4.42 | $2 210,00 |
| 1 000 | $3.89 | $3 890,00 |
PIC16LF76T-I/ML Présentation
An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), working RAM, peripherals (ADC, timers, communication interfaces), and I/O into one device. The PIC16 family uses a Harvard-architecture RISC CPU with a 14-bit instruction word optimized for deterministic, low-power embedded control. Within the broader taxonomy, this places the PIC16LF76 in the MCU > microcontroller > 8-bit MCU > PIC16 family > PIC16F7x sub-family, sitting alongside 16-bit and 32-bit MCUs in Microchip's embedded portfolio.
Key features include an integrated 8-bit Analog-to-Digital Converter (ADC) with 5 input channels, 25 digital I/O pins, and three serial communication peripherals: I2C (MSSP), SPI (MSSP), and USART. The device also includes two 8-bit timers and one 16-bit timer, a Watchdog Timer, and 256 bytes of EEPROM data memory. The 'LF' prefix designates the wide-voltage 1.8V-3.6V operating range ideal for battery-powered applications.
Architecturally, the PIC16LF76 uses Microchip's mid-range 14-bit instruction set with a single accumulator WREG, a hardware multiplier, and an interrupt controller. Its nanoWatt power management modes provide programmable sleep currents, enabling long battery life in portable products. The integrated brown-out reset and Power-on Reset improve system reliability across unstable supply conditions.
Typical applications include industrial sensor interfaces, low-power remote controls, battery management systems, small home appliances, HVAC controllers, and consumer electronics front panels. The combination of Flash memory, on-chip ADC, and multi-protocol serial interfaces makes it well suited to mixed-signal embedded designs.
When designing with this device, calculate worst-case current draw across all enabled peripherals before committing to battery budgets, and verify that the 1.8V minimum supply meets the ADC reference voltage requirements for the application's accuracy targets.
This page synthesizes distributor pricing, parametric data, drop-in alternatives, and practical design notes beyond the manufacturer datasheet, providing engineers and procurement teams a single source for PIC16LF76T-I/ML selection.
Alternatives de remplacement direct pour PIC16LF76T-I/ML — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC16LF76T-I/ML (même facteur de forme et même empreinte) — différant par Package, Timers, Operating Temperature, ADC, Core Architecture.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC16LF76-I/ML
✅ Remplacement direct✓ En stock
$4.2 / unité
Voir la fiche technique →PIC16LF767-I/ML
✅ Remplacement direct✓ En stock
$2.74 / unité
Voir la fiche technique →PIC16LF73T-I/ML
✅ Remplacement direct✓ En stock
$3.17 / unité
Voir la fiche technique →PIC16LF722A-I/ML
✅ Remplacement direct✓ En stock
$0.74 / unité
Voir la fiche technique →PIC16F76T-I/ML
✅ Remplacement direct✓ En stock
$2.62 / unité
Voir la fiche technique →PIC16LF76T-I/ML Valeurs maximales et caractéristiques électriques
| Core | 8-bit PIC16 RISC |
| Program Memory | 14 KB Flash |
| RAM | 368 bytes |
| EEPROM | 256 bytes |
| Maximum Clock Speed | 20 MHz |
| Tension d'alimentation | 1.8 V to 3.6 V |
| I/O Pins | 25 |
| ADC | 8-bit, 5 channels |
| Timers | 2 x 8-bit + 1 x 16-bit |
| Communication Interfaces | I2C, SPI, USART (MSSP + AUSART) |
| Watchdog Timer | Yes |
| Boîtier | 28-pin QFN (6x6 mm) with exposed pad |
| Type de montage | Surface Mount |
| Température de fonctionnement | -40C to +85C (Industrial) |
| Statut RoHS | Compliant |
| Instruction Set | PIC16 14-bit mid-range |
Configuration des broches de PIC16LF76T-I/ML
| Broche 1 | MCLR — Master Clear (Reset) input |
| Broche 2 | RA0/AN0 — Digital I/O / Analog input channel 0 |
| Broche 3 | RA1/AN1 — Digital I/O / Analog input channel 1 |
| Broche 4 | RA2/AN2 — Digital I/O / Analog input channel 2 |
| Broche 5 | RA3/AN3/VREF+ — Digital I/O / Analog input channel 3 / ADC positive reference |
| Broche 6 | RA4/T0CKI — Digital I/O / Timer0 clock input |
| Broche 7 | RA5/AN4/SS — Digital I/O / Analog input channel 4 / SPI Slave Select |
| Broche 8 | VSS — Ground reference |
| Broche 9 | OSC1/CLKI — Crystal oscillator input / external clock input |
| Broche 10 | OSC2/CLKO — Crystal oscillator output / clock output |
| Broche 11 | RC0/T1OSO/T1CKI — Digital I/O / Timer1 oscillator output / Timer1 clock input |
| Broche 12 | RC1/T1OSI/CCP2 — Digital I/O / Timer1 oscillator input / CCP2 PWM output |
| Broche 13 | RC2/CCP1 — Digital I/O / CCP1 PWM output |
| Broche 14 | RC3/SCK/SCL — Digital I/O / SPI clock / I2C clock |
| Broche 15 | RC4/SDI/SDA — Digital I/O / SPI data in / I2C data |
| Broche 16 | RC5/SDO — Digital I/O / SPI data out |
| Broche 17 | RC6/TX/CK — Digital I/O / USART TX / USART clock |
| Broche 18 | RC7/RX/DT — Digital I/O / USART RX / USART data |
| Broche 19 | VSS — Ground reference |
| Broche 20 | VDD — Positive supply voltage (1.8V-3.6V) |
| Broche 21 | RB0/INT — Digital I/O / External interrupt input |
| Broche 22 | RB1 — Digital I/O |
| Broche 23 | RB2 — Digital I/O |
| Broche 24 | RB3/PGM — Digital I/O / Low-voltage programming input |
| Broche 25 | RB4 — Digital I/O |
| Broche 26 | RB5 — Digital I/O |
| Broche 27 | RB6/PGC — Digital I/O / ICSP clock |
| Broche 28 | RB7/PGD — Digital I/O / ICSP data |
Applications typiques
PIC16LF76T-I/ML convient pour 6 applications: Battery-Powered Sensor Interface, Industrial Control Front Panel, Home Appliance Controller, Remote Control / Consumer IR, HVAC Climate Controller, LED Lighting Controller.
Battery-Powered Sensor Interface
The PIC16LF76T-I/ML's 1.8V-3.6V wide operating range and low-power nanoWatt sleep modes make it ideal for 2x AA battery-powered sensor nodes. The 14KB Flash supports small Modbus or custom sensor protocols, while the 5-channel 8-bit ADC handles temperature, humidity, and pressure transducers with adequate resolution for HVAC-grade accuracy. Brown-out reset prevents corruption at end-of-life battery voltage.
Recommandé
Industrial Control Front Panel
The PIC16LF76T-I/ML integrates 25 digital I/O lines plus 5 ADC channels in a compact QFN-28 footprint, fitting industrial control panels where PCB space is constrained. Three communication peripherals (I2C, SPI, USART) connect to display drivers, keypads, and supervisory controllers. The -40C to +85C industrial temperature rating supports factory floor deployment without thermal management.
Recommandé
Home Appliance Controller
With 14KB Flash supporting full state-machine implementations and 368B RAM for timer/event variables, the PIC16LF76T-I/ML is well suited to white-goods controllers in washing machines, dishwashers, and microwave ovens. The 5-channel ADC reads motor current, temperature sensors, and water level; the USART connects to inverter modules and HMI boards. The industrial -40C to +85C range covers typical appliance environments.
Recommandé
Remote Control / Consumer IR
The PIC16LF76T-I/ML's 20MHz clock supports accurate IR carrier frequency generation (typically 38kHz/40kHz) using the CCP module and a simple GPIO for the IR LED driver. The 14KB Flash accommodates complete RC5/RC6/SIRC protocol stacks with learning capability, while 368B RAM buffers received frames. Low-voltage operation extends battery life on coin cells or 2x AAA configurations.
Recommandé
HVAC Climate Controller
The PIC16LF76T-I/ML's 5-channel ADC supports simultaneous temperature sensing of supply air, return air, outdoor ambient, and humidity transducers, while 25 I/O lines drive relay controls for fan speeds, compressor, and reversing valves. With 14KB Flash, the device implements full PID control loops for climate regulation. The QFN-28 package fits behind wall-mounted thermostat displays with minimal PCB area.
Recommandé
LED Lighting Controller
The PIC16LF76T-I/ML's PWM-driven CCP modules combined with 5 ADC channels for color/temperature feedback enable smart LED driver controllers in architectural lighting. The 14KB Flash stores color profiles, fade curves, and DMX-512 or DALI protocol stacks. The USART communicates with upstream lighting controllers, while the wide 1.8V-3.6V supply operates from a regulated 3.3V rail.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC16LF76T-I/ML — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC16LF76-I/ML | PIC16LF767-I/ML | PIC16LF73T-I/ML | PIC16LF722A-I/ML | PIC16F76T-I/ML |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-QFN (6x6) - same | 28-QFN (6x6) - same | 28-QFN (6x6) - same | 28-QFN (6x6) - same | 28-QFN (6x6) - same | 28-QFN (6x6) - same |
| Program Memory | 14 KB Flash | 14 KB | 14 KB | 7 KB (-50%) | 3.5 KB (-75%) | 14 KB |
| RAM | 368 bytes | 368 bytes | 368 bytes | 192 bytes (-48%) | 512 bytes (+39%) | 368 bytes |
| Supply Voltage | 1.8 V - 3.6 V | 1.8 V - 3.6 V | 1.8 V - 3.6 V | 1.8 V - 3.6 V | 1.8 V - 3.6 V | 4.0 V - 5.5 V (NOT drop-in) |
| Max Clock Speed | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| ADC Channels | 5 channels x 8-bit | 5 channels x 8-bit | 8 channels x 8-bit | 5 channels x 8-bit | 4 channels x 8-bit | 5 channels x 8-bit |
| Communication Interfaces | I2C, SPI, USART | I2C, SPI, USART | I2C, SPI, USART | I2C, SPI, USART | I2C, SPI, USART | I2C, SPI, USART |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
Principaux différenciateurs
- Wide 1.8V-3.6V operating range enables direct battery operation (vs PIC16F76T-I/ML)
- More ADC channels in same QFN-28 footprint (vs PIC16LF722A-I/ML)
- Larger Flash for protocol stacks (vs PIC16LF73T-I/ML)
Notes de conception
Estimated: At 20MHz and 3.3V supply, the PIC16LF76T-I/ML active current is approximately 8-10 mA per Microchip datasheet DC characteristics. In sleep mode with WDT disabled, current drops to <1 uA, enabling battery-powered designs. For accurate battery-life modeling, calculate the duty cycle of active vs sleep states and include ADC conversion current (~1 mA during conversion) in active-mode budgets.
The QFN-28 package has an exposed thermal pad that MUST be soldered to the PCB ground plane for proper thermal dissipation and electrical grounding. Use at least 4 thermal vias under the pad to connect to inner ground planes. Place 0.1 uF decoupling capacitors close to VDD (pin 20) and VSS (pin 19), with bulk 10 uF tantalum or ceramic capacitors on each supply rail.
Do not confuse PIC16LF76 (1.8-3.6V) with PIC16F76 (4.0-5.5V) - they share the same datasheet but are NOT electrically drop-in compatible. Also, the 'T' suffix (e.g., PIC16LF76T-I/ML) indicates Tape & Reel packaging, while the absence of 'T' (e.g., PIC16LF76-I/ML) indicates tray; both are functionally identical but require different assembly line setup. Always verify configuration bits at programming time to enable proper oscillator and watchdog operation.
Informations de conformité
RoHS and REACH compliant per Microchip product page. Not AEC-Q100 qualified - use AEC-Q100 grade parts for automotive. Lead-free (Pb-free) reflow profile per JEDEC J-STD-020.
