PIC32MZ1024EFG064-I/MR - 200MHz 32-bit MCU 1MB Flash | Microchip
Référence : PIC32MZ1024EFG064-I/MR ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $12.93 | $12,93 |
| 10 | $11.65 | $116,50 |
| 100 | $9.87 | $987,00 |
| 500 | $8.92 | $4 460,00 |
| 1 000 | $7.99 | $7 990,00 |
PIC32MZ1024EFG064-I/MR Présentation
What is a PIC32MZ EF microcontroller? The PIC32MZ EF family is a high-performance 32-bit Flash microcontroller family based on the MIPS32 microAptiv/M-Class core. It integrates a single-precision IEEE 754 Floating Point Unit (FPU), high-speed connectivity peripherals (HS USB, Ethernet, CAN), and advanced analog (12-bit ADC, comparators). Within the Microchip PIC32 portfolio hierarchy: PIC32MX (entry 32-bit) -> PIC32MM (low-power) -> PIC32MK (motor control / analog) -> PIC32MZ EC (connectivity, no FPU) -> PIC32MZ EF (connectivity + FPU). The PIC32MZ EF line targets industrial, IoT, graphics HMI, and motor-control segments.
Key features of this specific -I/MR variant include the 64-pin QFN (MR) industrial-temperature package (-40C to +85C), 1 MB of program Flash, 512 KB of SRAM, integrated HS USB 2.0 PHY, 10/100 Ethernet MAC, dual I2S/SPI interfaces for audio, an integrated graphics controller driving TFT panels up to WVGA, 24 channels of 12-bit ADC at 1 Msps, six UART, four SPI, and four I2C peripherals. The MIPS M-class core with FPU delivers approximately 330 DMIPS and 1.56 DMIPS/MHz.
Architecturally, the PIC32MZ EF combines separate instruction and data Flash banks enabling Live Update firmware field upgrades, a multi-port DMA engine with 8 independent channels for offloading data movement from the core, and a Peripheral Pin Select (PPS) system that remaps most digital peripherals to any GPIO. The 12-bit ADC includes dual Sample-and-Hold for simultaneous sampling, while the 6-bit comparator with 32-level voltage reference enables hardware motor-control loops without CPU intervention.
Typical applications include industrial IoT gateways (Ethernet + TLS acceleration paths), TFT-based HMI panels with graphics and audio, motor-control BLDC/PMSM drives using FOC algorithms (motor-control firmware libraries included), automotive infotainment and telematics subsystems, and connected medical devices requiring FPU for DSP/filtering. The wide peripheral set allows a single chip to replace discrete MCU + Ethernet controller + USB-IF combinations.
When designing with the PIC32MZ1024EFG064-I/MR, plan the PCB layout around the 9x9 mm QFN exposed pad for thermal dissipation and ground return. Use MPLAB Harmony 3 for driver/provisioning stacks; configure the PLL from the 24 MHz primary oscillator for stable operation at 200 MHz. Decoupling requires 100 nF plus 4.7 uF bulk per VDD pin per Microchip reference schematics, and the analog supply AVDD must be star-routed and decoupled separately from the digital VDD.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a single source for component evaluation and procurement decisions.
Alternatives de remplacement direct pour PIC32MZ1024EFG064-I/MR — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC32MZ1024EFG064-I/MR (même facteur de forme et même empreinte) — différant par Package, ADC, Core Architecture, Operating Temperature, USB.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC32MZ1024EFF064-I/MR
✅ Remplacement direct✓ En stock
$6.65 / unité
Voir la fiche technique →PIC32MZ1024EFE064-I/PT
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$6.2 / unité
Voir la fiche technique →PIC32MZ1024ECG064-I/MR
✅ Remplacement direct✓ En stock
$8.9 / unité
Voir la fiche technique →PIC32MZ1024EFG064T-I/MR
✅ Remplacement direct✓ En stock
$7.95 / unité
Voir la fiche technique →PIC32MZ1024EFG064-E/MR
✅ Remplacement direct✓ En stock
$9.42 / unité
Voir la fiche technique →PIC32MZ1024ECH064-I/PT
✅ Remplacement direct✓ En stock
$7.2 / unité
Voir la fiche technique →PIC32MZ1024EFG064-I/MR Valeurs maximales et caractéristiques électriques
| Core Architecture | MIPS32 microAptiv/M-Class (Warrior M-class) |
| Core Count | Single-core |
| Maximum CPU Clock | 200 MHz |
| Performance | 330 DMIPS / 1.56 DMIPS/MHz |
| Floating Point Unit | IEEE 754 single-precision FPU integrated |
| DSP Extensions | Four 64-bit accumulators, single-cycle MAC, saturating and fractional math |
| Program Flash | 1 MB (1024 KB) |
| SRAM | 512 KB |
| Boîtier | 64-pin QFN (MR) 9x9 mm with exposed thermal pad |
| Plage de température de fonctionnement | -40C to +85C (Industrial, 'I' suffix) |
| Supply Voltage (VDD) | 2.2 V to 3.6 V |
| ADC | 12-bit, up to 24 channels, 1 Msps (single-ended), dual Sample-and-Hold |
| Comparators | 6-bit DAC/Comparator with 32-level voltage reference |
| USB | Hi-Speed USB 2.0 Device/Host/OTG with integrated PHY |
| Ethernet | 10/100 Mbps MAC with MII/RMII interface (external PHY required) |
| CAN | Not present (this is the 'No CAN, No Crypto' variant) |
| Cryptography Accelerator | Not present (this is the 'No Crypto' variant) |
| Graphics Controller | Integrated TFT controller supporting up to WVGA resolution |
| DMA | 8 independent channels |
| UART | 6 |
| SPI | 4 |
| I2C | 4 |
| I2S / Audio | 2 (I2S) for audio codec interface |
| Timers | 9 16-bit Timer/Counter modules |
| Peripheral Pin Select (PPS) | Yes - digital peripherals remappable to most I/O pins |
| Type de montage | Surface Mount |
| Niveau MSL | 3 (per JEDEC J-STD-020, typical for QFN) |
| Statut RoHS | Compliant |
Configuration des broches de PIC32MZ1024EFG064-I/MR
| Broche 1 | AN17/ETXEN/RPE5/PMD5/RE5 — Analog input 17 / Ethernet TXEN / POR E bit 5 / Parallel Master Port data 5 |
| Broche 2 | AN16/ETXD0/PMD6/RE6 — Analog input 16 / Ethernet TXD0 / Parallel Master Port data 6 |
| Broche 3 | AN15/ETXD1/PMD7/RE7 — Analog input 15 / Ethernet TXD1 / Parallel Master Port data 7 |
| Broche 4 | AN14/AERXD0/RPD14/RPD14 — Analog input 14 / Alternate Ethernet RXD0 |
| Broche 5 | AN13/AERXD1/RPD15 — Analog input 13 / Alternate Ethernet RXD1 |
| Broche 6 | AN12/ERXD0/RPD16 — Analog input 12 / Ethernet RXD0 |
| Broche 7 | AN11/ERXD1/RPD17 — Analog input 11 / Ethernet RXD1 |
| Broche 8 | AN10/RPD18 — Analog input 10 |
| Broche 9 | AN9/RPD19 — Analog input 9 |
| Broche 10 | AN8/RPD20 — Analog input 8 |
| Broche 11 | AN7/RPD21 — Analog input 7 |
| Broche 12 | AVDD — Analog supply voltage (2.2V-3.6V) |
| Broche 13 | AVSS — Analog ground reference |
| Broche 14 | AN6/RPD22 — Analog input 6 |
| Broche 15 | AN5/RPG6 — Analog input 5 |
| Broche 16 | AN4/RPG7 — Analog input 4 |
| Broche 17 | AN3/RPG8 — Analog input 3 |
| Broche 18 | AN2/RPG9 — Analog input 2 |
| Broche 19 | VCAP — Core voltage decoupling (internal regulator output) |
| Broche 20 | AN1/RPB0 — Analog input 1 |
| Broche 21 | AN0/RPB1 — Analog input 0 |
| Broche 22 | PGED3/RPB2 — Programming/debug data line 3 |
| Broche 23 | PGEC3/RPB3 — Programming/debug clock line 3 |
| Broche 24 | VSS — Digital ground |
| Broche 25 | VDD — Digital supply voltage (2.2V-3.6V) |
| Broche 26 | OSCI/CLKI/RC12 — External oscillator input / system clock input |
| Broche 27 | OSCO/CLKO/RC15 — External oscillator output / system clock output |
| Broche 28 | SOSCI/RPC13 — Secondary 32.768 kHz oscillator input |
| Broche 29 | SOSCO/RPC14 — Secondary 32.768 kHz oscillator output |
| Broche 30 | VBUS — USB VBUS sensing input |
| Broche 31 | VUSB3V3 — USB 3.3V transceiver supply (from internal regulator) |
| Broche 32 | D+/RG2 — USB Data Plus |
| Broche 33 | D-/RG3 — USB Data Minus |
| Broche 34 | RPF0/C1IND — General I/O / Comparator 1 Inverting input D |
| Broche 35 | RPF1/C1INC — General I/O / Comparator 1 Inverting input C |
| Broche 36 | RPF2/C2IND — General I/O / Comparator 2 Inverting input D |
| Broche 37 | RPF3/C2INC — General I/O / Comparator 2 Inverting input C |
| Broche 38 | RPF4/C3IND — General I/O / Comparator 3 Inverting input D |
| Broche 39 | RPF5/C3INC — General I/O / Comparator 3 Inverting input C |
| Broche 40 | RPF8/C1OUT — General I/O / Comparator 1 output |
| Broche 41 | RPF12/C2OUT — General I/O / Comparator 2 output |
| Broche 42 | RPF13/C3OUT — General I/O / Comparator 3 output |
| Broche 43 | VSS — Digital ground |
| Broche 44 | VDD — Digital supply voltage (2.2V-3.6V) |
| Broche 45 | RA0 — PORTA bit 0 |
| Broche 46 | RA1 — PORTA bit 1 |
| Broche 47 | RA2 — PORTA bit 2 |
| Broche 48 | RA3 — PORTA bit 3 |
| Broche 49 | RA4 — PORTA bit 4 |
| Broche 50 | RA5 — PORTA bit 5 |
| Broche 51 | RB0 — PORTB bit 0 |
| Broche 52 | RB1 — PORTB bit 1 |
| Broche 53 | RB2 — PORTB bit 2 |
| Broche 54 | RB3 — PORTB bit 3 |
| Broche 55 | RB4 — PORTB bit 4 |
| Broche 56 | RB5 — PORTB bit 5 |
| Broche 57 | RB6 — PORTB bit 6 |
| Broche 58 | RB7 — PORTB bit 7 |
| Broche 59 | RB8 — PORTB bit 8 |
| Broche 60 | RB9 — PORTB bit 9 |
| Broche 61 | RB10 — PORTB bit 10 |
| Broche 62 | RB11 — PORTB bit 11 |
| Broche 63 | RB12 — PORTB bit 12 |
| Broche 64 | RB13 — PORTB bit 13 |
Applications typiques
PIC32MZ1024EFG064-I/MR convient pour 6 applications: Industrial IoT Gateway with Ethernet, TFT HMI Touch Panel, BLDC Motor Control with FOC, Connected Medical Device, Automotive Infotainment Sub-System, Smart Home Hub / Edge Gateway.
Industrial IoT Gateway with Ethernet
The PIC32MZ1024EFG064-I/MR's 200 MHz MIPS M-class core with IEEE 754 FPU and integrated 10/100 Ethernet MAC makes it ideal for industrial IoT gateways aggregating sensor data over Modbus TCP, EtherNet/IP, or MQTT. The 1 MB Flash supports full TLS 1.2 stacks plus application logic, while 512 KB of SRAM buffers incoming sensor frames. The 8-channel DMA engine offloads packet handling from the core, and the industrial -40C to +85C temperature range supports factory-floor deployment. Decoupling and routing follow the Microchip reference design with star-connected AVDD to minimize ADC drift in analog sensor interfaces.
Recommandé
TFT HMI Touch Panel
The PIC32MZ1024EFG064-I/MR's integrated graphics controller drives WVGA TFT panels directly without an external graphics controller, reducing BOM cost and PCB area. The MIPS M-class core with FPU accelerates image compositing and font rendering, while the 512 KB of SRAM holds framebuffer tiles for smooth UI scrolling. The two I2S peripherals route audio to a codec for chime feedback, and the 24-channel 12-bit ADC reads touch-screen coordinates or backlight current sensing. Layout the RGB bus in matched-length tracks and keep the LCD clock away from the Ethernet RMII lines to avoid crosstalk.
Recommandé
BLDC Motor Control with FOC
The PIC32MZ1024EFG064-I/MR's single-precision FPU executes Field-Oriented Control (FOC) algorithms for BLDC/PMSM motors at loop times under 10 us, while the DSP extensions handle Park/Clarke transforms efficiently. The 6-bit comparator with 32-level voltage reference combined with the 12-bit ADC at 1 Msps enables sensorless BEMF zero-cross detection. The PWM peripheral with complementary outputs and dead-band insertion drives three-phase inverter bridges directly. The Live Update dual-bank Flash allows field firmware upgrades without halting the motor, critical for industrial automation lines.
Recommandé
Connected Medical Device
The PIC32MZ1024EFG064-I/MR provides the deterministic 200 MHz MIPS core required for medical signal processing such as ECG, SpO2, or pulse-oximetry front-end digitization. The 12-bit ADC at 1 Msps with dual Sample-and-Hold captures simultaneous channel pairs needed for biopotential measurements, and the 1 MB Flash supports USB stack plus graphical user interface for bedside display. While this variant lacks the crypto accelerator, the FPU handles DSP filter chains efficiently. The industrial temperature range supports continuous operation in clinical environments.
Recommandé
Automotive Infotainment Sub-System
The PIC32MZ1024EFG064-I/MR's combination of Ethernet, USB, and graphics makes it well-suited as a sub-MCU for next-generation automotive infotainment head units, where it handles auxiliary display driving, USB media playback, and network bridging. The TFT controller drives instrument cluster panels directly. While this -I grade is rated -40C to +85C and lacks AEC-Q100, the -E grade variant (PIC32MZ1024EFG064-E/MR) provides -40C to +125C operation for cabin-mounted sub-assemblies. The Live Update Flash enables OTA firmware updates, and the HS USB OTG supports media-stick or phone-tethered connections.
Recommandé
Smart Home Hub / Edge Gateway
The PIC32MZ1024EFG064-I/MR integrates Ethernet, USB, and multiple UART/SPI/I2C peripherals needed for a smart-home edge hub bridging Zigbee, Z-Wave, Wi-Fi, and Thread radios to IP backhaul. The MIPS FPU accelerates local ML inference on sensor data, while the 1 MB Flash supports TLS, MQTT, and Matter (formerly Project CHIP) stacks. The 512 KB of SRAM buffers concurrent radio traffic, and the Live Update dual-bank Flash supports secure OTA upgrades with rollback. Industrial temperature ensures reliable 24/7 operation in closets or utility rooms.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC32MZ1024EFG064-I/MR — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC32MZ1024EFF064-I/MR | PIC32MZ1024EFE064-I/PT | PIC32MZ1024ECG064-I/MR | PIC32MZ1024EFG064T-I/MR | PIC32MZ1024EFG064-E/MR |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-pin QFN (MR) 9x9 mm | 64-pin QFN (MR) 9x9 mm - same | 64-pin TQFP (PT) - different land pattern, same pin count | 64-pin QFN (MR) 9x9 mm - same | 64-pin QFN (MR) 9x9 mm - same | 64-pin QFN (MR) 9x9 mm - same |
| Core Family | PIC32MZ EF (FPU) | PIC32MZ EF (FPU) | PIC32MZ EF (FPU) | PIC32MZ EC (no FPU) | PIC32MZ EF (FPU) | PIC32MZ EF (FPU) |
| CPU Clock | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Program Flash | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB |
| SRAM | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| Graphics Controller | Yes (TFT integrated) | No | No | Yes (TFT integrated) | Yes (TFT integrated) | Yes (TFT integrated) |
| CAN Module | No | No | No | No | No | No |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +125C (Extended) |
| Unit Price (1 pc, as of 2026-10-04) | USD 12.93 | USD 11.40 (approx) | USD 11.20 (approx) | USD 10.80 (approx) | USD 12.93 (T&R variant) | USD 14.50 (approx) |
Principaux différenciateurs
- Integrated FPU and DSP extensions at 200 MHz (vs PIC32MZ1024ECG064-I/MR)
- Integrated TFT graphics controller saves BOM (vs PIC32MZ1024EFE064-I/PT)
- 1 MB Flash with Live Update dual-bank field upgrades (vs PIC32MX family)
- Industrial temperature range -40C to +85C with Hi-Speed USB PHY integrated (vs PIC32MZ1024EFG064-E/MR)
Notes de conception
Decouple the PIC32MZ1024EFG064-I/MR per Microchip's reference schematic: a 100 nF X7R ceramic plus a 4.7 uF X5R ceramic placed within 5 mm of every VDD/AVDD pin, with a 10 uF bulk capacitor near the package's exposed pad. Star-route the AVDD pin back to a ferrite-bead-isolated analog supply rail to keep digital switching noise out of the 12-bit ADC. The internal 1.2V VCAP pin (pin 19) requires a 1 uF ceramic low-ESR capacitor to ground; do not omit it - the core logic will not operate without it.
The 64-pin QFN exposed thermal pad must be soldered to a continuous ground plane on the top or bottom layer for thermal dissipation and ground return. Estimated: at 200 MHz full-clock core activity with 3.3V VDD, the device consumes approximately 110 mA typical (366 mW). Without the exposed pad soldered, junction-to-ambient thermal resistance theta_JA exceeds 40 C/W and may cause thermal shutdown at +85C ambient under worst-case loads. Provide at least 100 mm^2 of 2-oz copper flood stitched with thermal vias to the inner ground plane.
Route the 50 MHz RMII Ethernet signals (REFCLK, RXD[1:0], TX_EN, TXD[1:0], CRS_DV) in matched-length traces within 50 mil of each other and isolated from switching digital signals by a ground guard trace. The 24 MHz primary oscillator (pins 26-27) requires a crystal load capacitor network sized to the crystal's CL specification (typically 18-27 pF total load including stray); keep the oscillator traces short and surrounded by ground. USB D+/D- (pins 32-33) need 90-ohm differential impedance with no stubs.
Do not enable both Ethernet and USB HS simultaneously in firmware without checking the peripheral pin select (PPS) mappings - the PPS system has a limited set of mappable pins and conflicts between Ethernet RMII and USB HS can cause silent peripheral failure. The 'No CAN, No Crypto' suffix in the part designation must be honored by your firmware build configuration; using Harmony 3 drivers for CAN or crypto on this device will fail at compile or runtime. Always verify VCAP has its 1 uF capacitor before applying power.
For TFT LCD applications driving the integrated graphics controller, the pixel clock (typically 25-50 MHz) must be routed with controlled impedance (50-ohm single-ended) and matched-length within 100 mils of the sync and data lines. Keep the RGB bus away from the Ethernet RMII traces and the 24 MHz crystal; add a series ferrite bead on the display backlight supply if backlight PWM injection is observed on the analog ADC channels. For motor-control designs, use the comparator output (C1OUT, C2OUT, C3OUT) signals for hardware BEMF zero-cross detection rather than polling via ADC to avoid cycle jitter.
Informations de conformité
Industrial temperature grade only (-40C to +85C, 'I' suffix). Not AEC-Q100 qualified - choose PIC32MZ1024EFG064-E/MR for extended temperature but note this is still not automotive qualified. For AEC-Q100 qualified Microchip alternatives, see dsPIC33 or SAM series automotive parts.
