S912XEG128J1MAA - 16-bit HCS12X MCU 128KB Flash QFP-80 | NXP
Référence : S912XEG128J1MAA ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $12.5 | $12,50 |
| 10 | $11.2 | $112,00 |
| 100 | $9.85 | $985,00 |
| 500 | $8.95 | $4 475,00 |
| 1 000 | $8.2 | $8 200,00 |
S912XEG128J1MAA Présentation
An HCS12X microcontroller is a 16-bit automotive-grade MCU family combining the legacy HCS12 instruction set with the XGATE auxiliary RISC engine and a memory protection unit (MPU). MCUs sit at the bottom of the embedded computing hierarchy (microcontroller -> embedded MCU -> automotive ECU -> vehicle electronics system), where deterministic interrupt response and peripheral integration dominate design trade-offs.
Key features include 128 KB on-chip Flash with hardware-emulated EEPROM, 12-bit ADC with 3 us conversion time, Enhanced Capture Timer (ECT), Periodic Interrupt Timer (PIT), Real-Time Interrupt (RTI), PWM, Low-Voltage Detect (LVD), and an integrated Watchdog. Connectivity is rich for body and chassis ECUs: 5x CAN, 2x SPI, 2x SCI, I2C, IrDA, EBI/EMI, and 59 general-purpose I/O. The XGATE co-processor boosts effective throughput, allowing real-time peripherals to be serviced without taxing the main CPU.
Architecture uses the proven S12X CPU (16-bit CISC, 50 MHz) plus XGATE RISC co-processor, with supervisor/user memory protection modes and a 4-channel 24-bit Periodic Interrupt Timer chain. The 128 KB Flash supports byte-erasable program memory, and the part shares the S12XE family die across flash and RAM variants.
Typical applications include automotive body controllers, HVAC climate modules, instrument clusters, CAN/J1939 network gateways, industrial PLC slave boards, and HVAC/fan controllers. The 5x CAN controllers support multi-bus automotive networks including CAN and J1939.
Design consideration: pair the part with a 4.7-22 uF decoupling network, route single-ended and differential CAN pairs as 120-ohm twisted pairs, and reserve the XGATE interrupt vector space when porting legacy S12 code.
This page synthesizes distributor pricing, drop-in S12X alternatives, and practical automotive design notes not aggregated in the manufacturer datasheet.
Alternatives de remplacement direct pour S912XEG128J1MAA — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec S912XEG128J1MAA (même facteur de forme et même empreinte) — différant par Package, ADC, Timers, Operating Temperature, Mounting Type.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
MC9S12XEG128MAA
✅ Remplacement direct✓ En stock
$8.9 / unité
Voir la fiche technique →S912XEQ512J2MAL
✅ Remplacement direct✓ En stock
$17.95 / unité
Voir la fiche technique →S912XEG384J2CALR
✅ Remplacement direct✓ En stock
$9.1 / unité
Voir la fiche technique →MC9S12XEQ512CAG
✅ Remplacement direct✓ En stock
$14.4 / unité
Voir la fiche technique →S912XEP768J4CAL
✅ Remplacement direct✓ En stock
$7.4 / unité
Voir la fiche technique →MC9S12DP512CPVER
✅ Remplacement direct✓ En stock
$64.0452 / unité
Voir la fiche technique →S912XEG128J1MAA Valeurs maximales et caractéristiques électriques
| Core | HCS12X (S12X) 16-bit |
| Co-processor | XGATE RISC |
| Bus Speed | 50 MHz |
| Program Memory | 128 KB (128K x 8) Flash |
| Boîtier | 80-LQFP (MAA, 14x14 mm) |
| Number of I/O | 59 |
| Connectivity | CANbus, EBI/EMI, I2C, IrDA, SCI, SPI |
| Peripherals | LVD, POR, PWM, WDT |
| ADC | 12-bit, 3 us conversion time |
| Timers | ECT, PIT, RTI |
| Memory Protection | MPU with supervisor/user modes |
| Température de fonctionnement | -40C to +125C (Automotive Grade) |
| AEC-Q100 | Qualified |
| Statut RoHS | Compliant |
| Type de montage | Surface Mount |
Configuration des broches de S912XEG128J1MAA
| Broche 1 | PP0 — Port P bit 0 (5V I/O, PWM channel) |
| Broche 2 | PP1 — Port P bit 1 (5V I/O, PWM channel) |
| Broche 3 | PP2 — Port P bit 2 (5V I/O, PWM channel) |
| Broche 4 | PP3 — Port P bit 3 (5V I/O, PWM channel) |
| Broche 5 | PP4 — Port P bit 4 (5V I/O, PWM channel) |
| Broche 6 | PP5 — Port P bit 5 (5V I/O, PWM channel) |
| Broche 7 | PP6 — Port P bit 6 (5V I/O, PWM channel) |
| Broche 8 | PP7 — Port P bit 7 (5V I/O, PWM channel) |
| Broche 9 | BKGD — Background Debug Mode pin for BDM programming |
| Broche 10 | RESET — Reset input (active low, open-drain) |
| Broche 11 | VDDR — Voltage Regulator Output |
| Broche 12 | VSS — Ground |
| Broche 13 | VDD — Digital Supply Voltage |
| Broche 14 | VDDS — Sensor Supply Voltage |
| Broche 15 | VSS — Ground |
| Broche 20 | XTAL — Crystal oscillator output |
| Broche 21 | EXTAL — Crystal oscillator input |
| Broche 22 | VSSPLL — PLL Ground |
| Broche 23 | VDDPLL — PLL Supply |
| Broche 24 | XFC — PLL Filter Capacitor |
| Broche 25 | TCLK — Timer Clock input (ECT) |
| Broche 30 | CAN0TX — CAN 0 transmit |
| Broche 31 | CAN0RX — CAN 0 receive |
| Broche 32 | CAN1TX — CAN 1 transmit |
| Broche 33 | CAN1RX — CAN 1 receive |
| Broche 40 | MOSI0 — SPI 0 Master Out / Slave In |
| Broche 41 | MISO0 — SPI 0 Master In / Slave Out |
| Broche 42 | SPSCK0 — SPI 0 Clock |
| Broche 50 | TXD0 — SCI 0 Transmit |
| Broche 51 | RXD0 — SCI 0 Receive |
| Broche 60 | PAD00 — Port AD bit 0 (ADC channel) |
| Broche 61 | PAD01 — Port AD bit 1 (ADC channel) |
| Broche 70 | PW0 — PWM Channel 0 output |
| Broche 71 | PW1 — PWM Channel 1 output |
| Broche 78 | TEST — Test mode (tie to VSS in production) |
| Broche 79 | BKPT — Breakpoint request line |
| Broche 80 | A0 — Address line 0 (external bus) |
Applications typiques
S912XEG128J1MAA convient pour 7 applications: Automotive Body Control Module (BCM), HVAC Climate Control Module, CAN/CAN-FD Gateway ECU, Instrument Cluster Driver, Industrial CAN PLC Slave Module, Automotive Door/Window Lift Module, Electric Vehicle (EV) Battery Management Slave.
Automotive Body Control Module (BCM)
The S912XEG128J1MAA is well suited to body control modules because it integrates 5x CAN controllers, 2x SPI, 2x SCI, I2C, and IrDA - all the buses needed to bridge front body, comfort, and lighting networks. The 50 MHz S12X CPU with XGATE co-processor handles lighting PWM, door/window switch debounce, and CAN message routing in real time, freeing the main CPU for the LIN slave scheduler. Its AEC-Q100 qualification and -40C to +125C range allows direct placement behind the instrument cluster or behind the dash without thermal guards.
Recommandé
HVAC Climate Control Module
HVAC climate modules demand deterministic PWM for blower control, dual-zone temperature regulation, and reliable CAN communication to the comfort bus. The S912XEG128J1MAA's Enhanced Capture Timer (ECT) and 8-channel PWM (per the S12XEG family) produce accurate fan-speed control loops, while the 12-bit ADC with 3 us conversion samples cabin temperature sensors in real time. Its Flash-based hardware-emulated EEPROM supports the frequent write cycles of user preference storage. AEC-Q100 grade plus -40C to +125C operation covers the under-dash thermal environment behind the HVAC head unit.
Recommandé
CAN/CAN-FD Gateway ECU
A CAN gateway forwards frames between multiple automotive networks at high rate and must arbitrate 1,000+ messages per second. The S912XEG128J1MAA's 5 CAN controllers provide direct attachment to the body, chassis, powertrain, and diagnostic CAN buses concurrently, while the XGATE co-processor offloads CAN interrupt handling from the main CPU. Combined with 128 KB Flash, this part supports secure diagnostic routing (UDS), CAN-FD bridging, and J1939 filtering. AEC-Q100 qualification and industrial-grade thermal range suit under-hood and behind-dashboard placement in off-highway vehicle gateways.
Recommandé
Instrument Cluster Driver
Instrument clusters drive stepper motors for gauges, read CAN data from powertrain, and must boot fast to drive the speedometer and tachometer needles. The S912XEG128J1MAA's 50 MHz S12X CPU plus XGATE co-processor meets the 50 ms cold-boot requirement typical of cluster ECU specifications, and its Flash supports in-field firmware updates over CAN. The HCS12X is widely used in both analog and hybrid instrument clusters across mid-tier vehicle programs; AEC-Q100 reliability and the 80-LQFP footprint allow placement behind the cluster display module.
Recommandé
Industrial CAN PLC Slave Module
Industrial CANopen and DeviceNet PLC slaves use the S912XEG128J1MAA for IEC 61131-3 runtime compactness, CANopen stack, and deterministic cyclic I/O. The HCS12X's 16-bit CISC core plus XGATE offload optimize the CANopen PDO/SDO real-time path, while the periodic interrupt timer (PIT) supports the 1 ms SYNC cycle. The -40C to +125C industrial thermal range allows cabinet-free mounting, and 128 KB Flash covers the 100 KB stack plus ladder logic footprint. NXP's automotive-grade pedigree translates to long-lifecycle industrial availability.
Recommandé
Automotive Door/Window Lift Module
Door and window lift modules require PWM motor control for window regulators and mirror adjusters, anti-pinch algorithms, and LIN/CAN connectivity. The S912XEG128J1MAA integrates PWM, ADC, ECT timers, and CAN in a single AEC-Q100 device, supporting anti-pinch current sensing via ADC and PWM control at low cost. The 128 KB Flash fits boot, LIN/CAN stack, and the anti-pinch state machine. The wide -40C to +125C range ensures operation in door cavities where temperatures swing sharply with sunlight load.
Recommandé
Electric Vehicle (EV) Battery Management Slave
In EV battery management systems the S912XEG128J1MAA serves as the cell-monitoring slave that collects ADC measurements from the daisy-chained AFEs, performs balancing, and reports to the master BMS over CAN. The HCS12X 12-bit ADC plus 5 CAN channels enable 12-16 cell-voltage scans per millisecond while simultaneously running CAN-to-master communication. The AEC-Q100 grade suits under-pack deployment where temperatures reach +85C; the Flash supports in-field firmware updates for chemistry-specific algorithms.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour S912XEG128J1MAA — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MC9S12XEG128MAA | S912XEQ512J2MAL | S912XEG384J2CALR | MC9S12XEQ512CAG |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 80-LQFP (MAA, 14x14 mm) | 80-LQFP (MAA, 14x14 mm) - same | 80-LQFP (MAA) - same | 80-LQFP (CAL package) - same footprint | 80-LQFP (CAG) - same |
| Core | HCS12X (S12X) 16-bit | HCS12X 16-bit - same | HCS12X 16-bit - same | HCS12X 16-bit - same | HCS12X 16-bit - same |
| Bus Speed | 50 MHz | 50 MHz - same | 50 MHz - same | 50 MHz - same | 50 MHz - same |
| Flash | 128 KB | 128 KB - same | 512 KB (+300%) | 384 KB (+200%) | 512 KB (+300%) |
| XGATE Co-processor | Yes | Yes - same | Yes | Yes | Yes |
| CAN Controllers | Up to 5 | Up to 5 - same | Up to 5 | Up to 5 | Up to 5 |
| AEC-Q100 | Qualified | Qualified | Qualified | Varies by temperature grade | Qualified |
| Operating Temperature | -40C to +125C | -40C to +125C - same | -40C to +125C | Varies (CAL grade) | -40C to +125C |
Principaux différenciateurs
- Highest available Flash within the EG family's lower-density bracket (vs S912XD64F2MAA)
- AEC-Q100 grade with XGATE co-processor (vs MC9S08DN32AMLC)
- Five CAN controllers on-chip (vs S912XHZ128J3VAL)
- Memory Protection Unit (MPU) with supervisor/user modes (vs S912XD64F2MAA)
Notes de conception
Decouple each VDD/VDDS/VSS pair with a 100 nF ceramic capacitor placed within 3 mm of the package pin, plus a bulk 4.7 uF to 22 uF tantalum or ceramic at the regulator output. The S912XEG128J1MAA's internal VDDR regulator requires an external bulk decoupling to handle peak current excursions during CAN transmit. A ferrite bead between VDD and VDDS keeps ADC noise out of the digital core. Estimated: at 50 MHz with five CAN nodes, average current is around 80-120 mA; design the supply rail with at least 30% margin.
Route CAN_H and CAN_L as a 120-ohm differential pair with controlled impedance (typically 100-ohm differential), keep stubs to transceiver pins below 25 mm, and add a common-mode choke plus split termination (60 ohms + 30 pF + 60 ohms) to meet automotive EMC requirements. Place the CAN transceiver as close as possible to the MCU's CAN0-4 TX/RX pins to minimize trace capacitance. A ground stitch via array under the LQFP thermal pad improves thermal dissipation.
Do not leave the BKGD pin floating during normal operation - tie it through a 4.7 kohm pull-up to VDDR or leave it connected via the BDM tool. The TEST pin must be tied to VSS in production to avoid accidental test-mode entry. The XFC capacitor value is critical for PLL jitter; use the precise NXP-recommended NPO or C0G capacitor, not X7R. Avoid programming the HCS12X Flash row-by-row in foreground during critical CAN traffic - use the available command-based fast programming mode instead.
The 12-bit ADC achieves 3 us conversion time only with proper analog front-end design. Route ADC input traces with a guard trace to AGND, keep the analog ground return path separated from digital ground until the star-ground point. Add a small RC (100 ohm + 100 pF) anti-aliasing filter in front of each ADC channel for current-sensing inputs. Estimated: with 3 us conversion and 12-bit resolution, the effective sample rate exceeds 333 kSamples/s, sufficient for power electronics monitoring.
Informations de conformité
AEC-Q100 automotive qualified per NXP product page; RoHS/REACH compliant. Halogen-free status not explicitly stated in the verified data - set to unknown until confirmed by NXP material declaration.
