S912XEG128J1MAA - 16-bit HCS12X MCU 128KB Flash QFP-80 | NXP
部品番号: S912XEG128J1MAA ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $12.5 | $12.50 |
| 10 | $11.2 | $112.00 |
| 100 | $9.85 | $985.00 |
| 500 | $8.95 | $4,475.00 |
| 1,000 | $8.2 | $8,200.00 |
S912XEG128J1MAA 概要
An HCS12X microcontroller is a 16-bit automotive-grade MCU family combining the legacy HCS12 instruction set with the XGATE auxiliary RISC engine and a memory protection unit (MPU). MCUs sit at the bottom of the embedded computing hierarchy (microcontroller -> embedded MCU -> automotive ECU -> vehicle electronics system), where deterministic interrupt response and peripheral integration dominate design trade-offs.
Key features include 128 KB on-chip Flash with hardware-emulated EEPROM, 12-bit ADC with 3 us conversion time, Enhanced Capture Timer (ECT), Periodic Interrupt Timer (PIT), Real-Time Interrupt (RTI), PWM, Low-Voltage Detect (LVD), and an integrated Watchdog. Connectivity is rich for body and chassis ECUs: 5x CAN, 2x SPI, 2x SCI, I2C, IrDA, EBI/EMI, and 59 general-purpose I/O. The XGATE co-processor boosts effective throughput, allowing real-time peripherals to be serviced without taxing the main CPU.
Architecture uses the proven S12X CPU (16-bit CISC, 50 MHz) plus XGATE RISC co-processor, with supervisor/user memory protection modes and a 4-channel 24-bit Periodic Interrupt Timer chain. The 128 KB Flash supports byte-erasable program memory, and the part shares the S12XE family die across flash and RAM variants.
Typical applications include automotive body controllers, HVAC climate modules, instrument clusters, CAN/J1939 network gateways, industrial PLC slave boards, and HVAC/fan controllers. The 5x CAN controllers support multi-bus automotive networks including CAN and J1939.
Design consideration: pair the part with a 4.7-22 uF decoupling network, route single-ended and differential CAN pairs as 120-ohm twisted pairs, and reserve the XGATE interrupt vector space when porting legacy S12 code.
This page synthesizes distributor pricing, drop-in S12X alternatives, and practical automotive design notes not aggregated in the manufacturer datasheet.
ドロップイン代替品: S912XEG128J1MAA — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: S912XEG128J1MAA （同一形状・フットプリント） — 相違点: Package, ADC, Timers, Operating Temperature, Mounting Type.
クイック比較ツール — 並列比較する代替部品を選択:
MC9S12XEG128MAA
✅ ドロップイン✓ 在庫あり
$8.9 / 個
データシートを見る →S912XEQ512J2MAL
✅ ドロップイン✓ 在庫あり
$17.95 / 個
データシートを見る →S912XEG384J2CALR
✅ ドロップイン✓ 在庫あり
$9.1 / 個
データシートを見る →MC9S12XEQ512CAG
✅ ドロップイン✓ 在庫あり
$14.4 / 個
データシートを見る →S912XEP768J4CAL
✅ ドロップイン✓ 在庫あり
$7.4 / 個
データシートを見る →MC9S12DP512CPVER
✅ ドロップイン✓ 在庫あり
$64.0452 / 個
データシートを見る →S912XEG128J1MAA 最大定格＆電気的特性
| Core | HCS12X (S12X) 16-bit |
| Co-processor | XGATE RISC |
| Bus Speed | 50 MHz |
| Program Memory | 128 KB (128K x 8) Flash |
| パッケージ | 80-LQFP (MAA, 14x14 mm) |
| Number of I/O | 59 |
| Connectivity | CANbus, EBI/EMI, I2C, IrDA, SCI, SPI |
| Peripherals | LVD, POR, PWM, WDT |
| ADC | 12-bit, 3 us conversion time |
| Timers | ECT, PIT, RTI |
| Memory Protection | MPU with supervisor/user modes |
| 動作温度 | -40C to +125C (Automotive Grade) |
| AEC-Q100 | Qualified |
| RoHS ステータス | Compliant |
| 実装タイプ | Surface Mount |
S912XEG128J1MAA ピン構成
| ピン 1 | PP0 — Port P bit 0 (5V I/O, PWM channel) |
| ピン 2 | PP1 — Port P bit 1 (5V I/O, PWM channel) |
| ピン 3 | PP2 — Port P bit 2 (5V I/O, PWM channel) |
| ピン 4 | PP3 — Port P bit 3 (5V I/O, PWM channel) |
| ピン 5 | PP4 — Port P bit 4 (5V I/O, PWM channel) |
| ピン 6 | PP5 — Port P bit 5 (5V I/O, PWM channel) |
| ピン 7 | PP6 — Port P bit 6 (5V I/O, PWM channel) |
| ピン 8 | PP7 — Port P bit 7 (5V I/O, PWM channel) |
| ピン 9 | BKGD — Background Debug Mode pin for BDM programming |
| ピン 10 | RESET — Reset input (active low, open-drain) |
| ピン 11 | VDDR — Voltage Regulator Output |
| ピン 12 | VSS — Ground |
| ピン 13 | VDD — Digital Supply Voltage |
| ピン 14 | VDDS — Sensor Supply Voltage |
| ピン 15 | VSS — Ground |
| ピン 20 | XTAL — Crystal oscillator output |
| ピン 21 | EXTAL — Crystal oscillator input |
| ピン 22 | VSSPLL — PLL Ground |
| ピン 23 | VDDPLL — PLL Supply |
| ピン 24 | XFC — PLL Filter Capacitor |
| ピン 25 | TCLK — Timer Clock input (ECT) |
| ピン 30 | CAN0TX — CAN 0 transmit |
| ピン 31 | CAN0RX — CAN 0 receive |
| ピン 32 | CAN1TX — CAN 1 transmit |
| ピン 33 | CAN1RX — CAN 1 receive |
| ピン 40 | MOSI0 — SPI 0 Master Out / Slave In |
| ピン 41 | MISO0 — SPI 0 Master In / Slave Out |
| ピン 42 | SPSCK0 — SPI 0 Clock |
| ピン 50 | TXD0 — SCI 0 Transmit |
| ピン 51 | RXD0 — SCI 0 Receive |
| ピン 60 | PAD00 — Port AD bit 0 (ADC channel) |
| ピン 61 | PAD01 — Port AD bit 1 (ADC channel) |
| ピン 70 | PW0 — PWM Channel 0 output |
| ピン 71 | PW1 — PWM Channel 1 output |
| ピン 78 | TEST — Test mode (tie to VSS in production) |
| ピン 79 | BKPT — Breakpoint request line |
| ピン 80 | A0 — Address line 0 (external bus) |
主な用途
S912XEG128J1MAA の用途: 7 件s: Automotive Body Control Module (BCM), HVAC Climate Control Module, CAN/CAN-FD Gateway ECU, Instrument Cluster Driver, Industrial CAN PLC Slave Module, Automotive Door/Window Lift Module, Electric Vehicle (EV) Battery Management Slave.
Automotive Body Control Module (BCM)
The S912XEG128J1MAA is well suited to body control modules because it integrates 5x CAN controllers, 2x SPI, 2x SCI, I2C, and IrDA - all the buses needed to bridge front body, comfort, and lighting networks. The 50 MHz S12X CPU with XGATE co-processor handles lighting PWM, door/window switch debounce, and CAN message routing in real time, freeing the main CPU for the LIN slave scheduler. Its AEC-Q100 qualification and -40C to +125C range allows direct placement behind the instrument cluster or behind the dash without thermal guards.
おすすめ
HVAC Climate Control Module
HVAC climate modules demand deterministic PWM for blower control, dual-zone temperature regulation, and reliable CAN communication to the comfort bus. The S912XEG128J1MAA's Enhanced Capture Timer (ECT) and 8-channel PWM (per the S12XEG family) produce accurate fan-speed control loops, while the 12-bit ADC with 3 us conversion samples cabin temperature sensors in real time. Its Flash-based hardware-emulated EEPROM supports the frequent write cycles of user preference storage. AEC-Q100 grade plus -40C to +125C operation covers the under-dash thermal environment behind the HVAC head unit.
おすすめ
CAN/CAN-FD Gateway ECU
A CAN gateway forwards frames between multiple automotive networks at high rate and must arbitrate 1,000+ messages per second. The S912XEG128J1MAA's 5 CAN controllers provide direct attachment to the body, chassis, powertrain, and diagnostic CAN buses concurrently, while the XGATE co-processor offloads CAN interrupt handling from the main CPU. Combined with 128 KB Flash, this part supports secure diagnostic routing (UDS), CAN-FD bridging, and J1939 filtering. AEC-Q100 qualification and industrial-grade thermal range suit under-hood and behind-dashboard placement in off-highway vehicle gateways.
おすすめ
Instrument Cluster Driver
Instrument clusters drive stepper motors for gauges, read CAN data from powertrain, and must boot fast to drive the speedometer and tachometer needles. The S912XEG128J1MAA's 50 MHz S12X CPU plus XGATE co-processor meets the 50 ms cold-boot requirement typical of cluster ECU specifications, and its Flash supports in-field firmware updates over CAN. The HCS12X is widely used in both analog and hybrid instrument clusters across mid-tier vehicle programs; AEC-Q100 reliability and the 80-LQFP footprint allow placement behind the cluster display module.
おすすめ
Industrial CAN PLC Slave Module
Industrial CANopen and DeviceNet PLC slaves use the S912XEG128J1MAA for IEC 61131-3 runtime compactness, CANopen stack, and deterministic cyclic I/O. The HCS12X's 16-bit CISC core plus XGATE offload optimize the CANopen PDO/SDO real-time path, while the periodic interrupt timer (PIT) supports the 1 ms SYNC cycle. The -40C to +125C industrial thermal range allows cabinet-free mounting, and 128 KB Flash covers the 100 KB stack plus ladder logic footprint. NXP's automotive-grade pedigree translates to long-lifecycle industrial availability.
おすすめ
Automotive Door/Window Lift Module
Door and window lift modules require PWM motor control for window regulators and mirror adjusters, anti-pinch algorithms, and LIN/CAN connectivity. The S912XEG128J1MAA integrates PWM, ADC, ECT timers, and CAN in a single AEC-Q100 device, supporting anti-pinch current sensing via ADC and PWM control at low cost. The 128 KB Flash fits boot, LIN/CAN stack, and the anti-pinch state machine. The wide -40C to +125C range ensures operation in door cavities where temperatures swing sharply with sunlight load.
おすすめ
Electric Vehicle (EV) Battery Management Slave
In EV battery management systems the S912XEG128J1MAA serves as the cell-monitoring slave that collects ADC measurements from the daisy-chained AFEs, performs balancing, and reports to the master BMS over CAN. The HCS12X 12-bit ADC plus 5 CAN channels enable 12-16 cell-voltage scans per millisecond while simultaneously running CAN-to-master communication. The AEC-Q100 grade suits under-pack deployment where temperatures reach +85C; the Flash supports in-field firmware updates for chemistry-specific algorithms.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: S912XEG128J1MAA — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MC9S12XEG128MAA | S912XEQ512J2MAL | S912XEG384J2CALR | MC9S12XEQ512CAG |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 80-LQFP (MAA, 14x14 mm) | 80-LQFP (MAA, 14x14 mm) - same | 80-LQFP (MAA) - same | 80-LQFP (CAL package) - same footprint | 80-LQFP (CAG) - same |
| Core | HCS12X (S12X) 16-bit | HCS12X 16-bit - same | HCS12X 16-bit - same | HCS12X 16-bit - same | HCS12X 16-bit - same |
| Bus Speed | 50 MHz | 50 MHz - same | 50 MHz - same | 50 MHz - same | 50 MHz - same |
| Flash | 128 KB | 128 KB - same | 512 KB (+300%) | 384 KB (+200%) | 512 KB (+300%) |
| XGATE Co-processor | Yes | Yes - same | Yes | Yes | Yes |
| CAN Controllers | Up to 5 | Up to 5 - same | Up to 5 | Up to 5 | Up to 5 |
| AEC-Q100 | Qualified | Qualified | Qualified | Varies by temperature grade | Qualified |
| Operating Temperature | -40C to +125C | -40C to +125C - same | -40C to +125C | Varies (CAL grade) | -40C to +125C |
主な差別化要因
- Highest available Flash within the EG family's lower-density bracket （vs S912XD64F2MAA)
- AEC-Q100 grade with XGATE co-processor （vs MC9S08DN32AMLC)
- Five CAN controllers on-chip （vs S912XHZ128J3VAL)
- Memory Protection Unit (MPU) with supervisor/user modes （vs S912XD64F2MAA)
設計ノート
Decouple each VDD/VDDS/VSS pair with a 100 nF ceramic capacitor placed within 3 mm of the package pin, plus a bulk 4.7 uF to 22 uF tantalum or ceramic at the regulator output. The S912XEG128J1MAA's internal VDDR regulator requires an external bulk decoupling to handle peak current excursions during CAN transmit. A ferrite bead between VDD and VDDS keeps ADC noise out of the digital core. Estimated: at 50 MHz with five CAN nodes, average current is around 80-120 mA; design the supply rail with at least 30% margin.
Route CAN_H and CAN_L as a 120-ohm differential pair with controlled impedance (typically 100-ohm differential), keep stubs to transceiver pins below 25 mm, and add a common-mode choke plus split termination (60 ohms + 30 pF + 60 ohms) to meet automotive EMC requirements. Place the CAN transceiver as close as possible to the MCU's CAN0-4 TX/RX pins to minimize trace capacitance. A ground stitch via array under the LQFP thermal pad improves thermal dissipation.
Do not leave the BKGD pin floating during normal operation - tie it through a 4.7 kohm pull-up to VDDR or leave it connected via the BDM tool. The TEST pin must be tied to VSS in production to avoid accidental test-mode entry. The XFC capacitor value is critical for PLL jitter; use the precise NXP-recommended NPO or C0G capacitor, not X7R. Avoid programming the HCS12X Flash row-by-row in foreground during critical CAN traffic - use the available command-based fast programming mode instead.
The 12-bit ADC achieves 3 us conversion time only with proper analog front-end design. Route ADC input traces with a guard trace to AGND, keep the analog ground return path separated from digital ground until the star-ground point. Add a small RC (100 ohm + 100 pF) anti-aliasing filter in front of each ADC channel for current-sensing inputs. Estimated: with 3 us conversion and 12-bit resolution, the effective sample rate exceeds 333 kSamples/s, sufficient for power electronics monitoring.
コンプライアンス情報
AEC-Q100 automotive qualified per NXP product page; RoHS/REACH compliant. Halogen-free status not explicitly stated in the verified data - set to unknown until confirmed by NXP material declaration.
