STM32F750Z8T6 - 216MHz Cortex-M7 64KB Flash MCU | STMicroelectronics
Référence : STM32F750Z8T6 ✓ ActifSTM32F750Z8T6 Présentation
An Arm Cortex-M7 microcontroller is a 32-bit reduced-instruction-set processor designed for embedded systems, where deterministic control, low power, and extensive peripheral integration matter more than desktop-class performance. The STM32F7 family sits within the broader microcontroller hierarchy: Cortex-M7 core, STM32F7 series, STM32 product family, 32-bit microcontroller category, and embedded semiconductor platform.
The STM32F750x8 device family provides a 216 MHz maximum operating frequency and 64 KB of embedded Flash. Its high clock rate supports demanding control loops, digital signal processing, communications protocol handling, and human-machine interface updates. The 144-pin LQFP package exposes a broad set of GPIO and mixed-signal peripherals while providing a widely used surface-mount footprint for industrial control boards and prototypes.
The STM32F750Z8T6 is identified by the 216 MHz Cortex-M7 performance class, 64 KB Flash capacity, and 144-LQFP package in distributor catalog data. The T6 ordering code identifies the temperature and package configuration, while the Z8 portion identifies the 64 KB Flash density variant. Exact SRAM capacity, operating-temperature limits, and individual peripheral electrical limits should be confirmed in the STM32F750x8 manufacturer documentation before layout or firmware sign-off.
Typical uses include industrial automation controllers, motor and motion-control boards, communications equipment, test and measurement instruments, and connected embedded products. The Arm Cortex-M7 architecture also makes the device suitable for DSP-assisted filtering and real-time signal processing when application-specific peripherals and accelerators are used.
When creating a PCB around this MCU, preserve the LQFP-144 land pattern, provide clean decoupling at every supply pin, and route sensitive analog and communication interfaces away from high-current switching nodes. Firmware development requires an STM32-compatible Cortex-M7 toolchain and device support for the STM32F750x8 family.
This page combines the verified core specifications, sourcing information, package constraints, practical design notes, and strictly same-footprint replacement candidates to support component selection and board bring-up. Use the manufacturer datasheet and package drawings for the authoritative pin list, electrical limits, and land-pattern dimensions.
Alternatives de remplacement direct pour STM32F750Z8T6 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec STM32F750Z8T6 (même facteur de forme et même empreinte) — différant par Package, Operating Temperature, Flash Memory, Communication Interfaces, Timers.
STM32F730Z8T6
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →STM32F722ZET6
✅ Remplacement direct✓ En stock
$6.2344 / unité
Voir la fiche technique →STM32F723ZET6
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →STM32F756ZGT6
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →STM32F750Z8
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
STM32F750Z8T6 Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit ARM Cortex-M7 microcontroller |
| Manufacturer | STMicroelectronics |
| Maximum CPU Frequency | 216 MHz |
| Flash Memory | 64 KB (64K x 8) |
| Boîtier | 144-LQFP (20 x 20 mm) |
| Core Architecture | Arm Cortex-M7 |
| Word Length | 32-bit |
| Product Series | STM32F7 |
| Device Variant | STM32F750x8 |
| Type de montage | Surface mount |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | not_applicable |
Guide de configuration des broches du STM32F750Z8T6 144-lqfp (20 x 20 mm)
Configuration des broches du STM32F750Z8T6 (boîtier 144-lqfp (20 x 20 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour STM32F750Z8T6.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
STM32F750Z8T6 convient pour 6 applications: Industrial Automation Controller, Motor and Motion Control, Communications Gateway, Test and Measurement Instrument, Real-Time DSP Processing, Connected Embedded Control Board.
Industrial Automation Controller
The STM32F750Z8T6 fits an industrial automation controller that combines deterministic control loops with a generous pin count. Its Arm Cortex-M7 core operates up to 216 MHz, providing headroom for protocol handling, diagnostics, and background control tasks, while the 144-LQFP package simplifies access to multiple GPIO, timers, and communication signals. Install it between field-bus transceivers, sensor interfaces, and motor or actuator drivers, then isolate noisy power stages from sensitive control signals. Because the catalog data confirms 64 KB of Flash, software architects should measure bootloader and application size before release. Use the manufacturer timing, electrical, and pin-assignment tables to validate clock configuration, supply sequencing, and peripheral multiplexing.
Recommandé
Motor and Motion Control
The STM32F750Z8T6 is suitable for motor and motion-control boards where fast computation, multiple timers, and a high pin count are more valuable than a minimal footprint. The 216 MHz Cortex-M7 core can execute current-loop and position-loop tasks while leaving bandwidth for communication and diagnostics. Place the MCU near the encoder inputs and timer outputs, keep switching-node return currents out of the control ground path, and use the 144-pin LQFP footprint to distribute high-pin-count routing. The verified 64 KB Flash figure makes code-size accounting important: confirm runtime, bootloader, and field-update requirements against the STM32F750x8 device documentation before finalizing the application.
Recommandé
Communications Gateway
The STM32F750Z8T6 can serve as the control processor in a communications gateway that must combine protocol processing with multiple external interfaces. Its 216 MHz Arm Cortex-M7 performance class supports Ethernet, serial, or field-bus stacks when the required peripherals and memory are confirmed, and the 144-pin package provides ample signal access. Position the MCU to minimize the distance between high-speed interfaces and their connectors, provide continuous reference-clock and supply routing, and isolate switching regulators or transceivers to reduce conducted and radiated noise. The 64 KB Flash configuration is the key constraint for gateway applications, so use the manufacturer memory map and bootloader requirements to confirm that application code, certificates, and logs fit.
Recommandé
Test and Measurement Instrument
The STM32F750Z8T6 is well suited to a precision test-and-measurement front end that must sequence instruments, process sensor data, and maintain a responsive local interface. The 216 MHz Cortex-M7 core supports fast filtering and calibration routines, while the 144-LQFP package offers enough pins for multiple analog inputs, control signals, displays, and communications. Place analog and digital return currents separately, use short guard-trace techniques around sensitive inputs, and reference high-speed interfaces from the MCU's clock architecture according to the device documentation. The verified 64 KB Flash size may be adequate for a focused instrument, but logging, bootloader, and upgrade code must be checked against the exact STM32F750x8 memory configuration before production.
Recommandé
Real-Time DSP Processing
The STM32F750Z8T6 can be used in real-time signal-processing applications because its Arm Cortex-M7 core operates at up to 216 MHz and supports efficient fixed- and floating-point control workflows. The 144-LQFP package accommodates high-rate serial inputs, digital converters, and control outputs while keeping the design on a widely available surface-mount technology. Place ADC and DAC interfaces according to the manufacturer analog-layout recommendations, use short return paths for digital signals, and decouple each supply pin locally. Because only 64 KB of Flash is confirmed by the catalog data, streaming buffers and algorithms normally belong in SRAM, so verify the memory requirement and the selected device variant in the STM32F750x8 documentation.
Recommandé
Connected Embedded Control Board
The STM32F750Z8T6 is appropriate for a connected embedded controller that must supervise sensors, manage local actuators, and support secure network or field-bus communication. Its Cortex-M7 core provides performance for protocol stacks and real-time tasks, while the large LQFP package supports both control and connectivity functions on one board. Use a separate low-noise regulator section for analog rails, place communication transceivers near connectors, and maintain short, continuous return paths beneath high-speed signals. Firmware planning should start with the confirmed 64 KB Flash capacity and the manufacturer's boot and memory-map details. Confirm the precise peripheral set, pin multiplexing, clock sources, and low-power modes in the official STM32F750x8 documentation.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour STM32F750Z8T6 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | STM32F730Z8T6 | STM32F722ZET6 | STM32F723ZET6 | STM32F756ZGT6 | STM32F750Z8 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 144-LQFP (20 x 20 mm) | LQFP-144 (20 x 20 mm) | LQFP-144 (20 x 20 mm) | LQFP-144 (20 x 20 mm) | LQFP-144 (20 x 20 mm) | LQFP-144 (20 x 20 mm) |
| CPU Core | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 |
| Architecture | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC |
| Series | STM32F7 | STM32F7 | STM32F7 | STM32F7 | STM32F7 | STM32F7 |
| Enable / Feature Set | STM32F750x8 feature set | STM32F730 feature set | STM32F722 feature set | STM32F723 feature set | STM32F756 feature set | STM32F750x8 feature set |
| Temperature Grade | T6 ordering option | T6 ordering option | ET6 ordering option | ET6 ordering option | GT6 ordering option | Ordering option required |
Principaux différenciateurs
- Direct STM32F750x8 family match (vs STM32F730Z8T6)
- Higher Flash capacity for expanding firmware (vs STM32F750Z8T6)
- Large 144-pin package for peripheral access (vs STM32F750V8T6)
Notes de conception
Place local ceramic decoupling capacitors at every supply pin and route each capacitor directly to the corresponding power or ground pad with the shortest possible loop. Use the manufacturer power-supply and decoupling guidance for capacitor values and placement. Analog and digital loads should not share an unrestricted return path; separate their ground references where the application permits and connect them at the defined analog-ground point to prevent switching currents from crossing the Cortex-M7 and communication signal paths.
Preserve the exact 144-LQFP 20 x 20 mm land pattern and check pad length, width, and courtyard against the official package drawing before fabrication. Route high-speed clock, serial, and debug signals over continuous reference planes, and avoid switching-regulator and power-stage copper beneath sensitive nets. The large pin count also requires disciplined layer transitions: use vias sparingly, maintain return-path continuity, and follow the manufacturer pin-multiplexing table rather than relying on generic MCU assumptions.
Do not treat every STM32F7 device with an LQFP-144 package as a plug-in replacement. The STM32F730Z8T6, STM32F722ZET6, STM32F723ZET6, and STM32F756ZGT6 differ in memory density or feature configuration, and the ordering suffix affects the temperature and package option. Before substitution, compare the exact Flash and SRAM requirement, peripheral map, clock tree, pin multiplexing, boot configuration, and firmware support, then recompile and validate the complete image.
Plan debug and firmware-update access before layout. The SWD interface and boot-related signals need clean, direct routing that remains usable after the board is assembled. For designs containing communication transceivers or high-speed converters, keep clocks short, provide continuous return paths, and separate switching nodes from sensitive pins. Verify the selected clock source, peripheral pin assignments, and I/O drive settings against the STM32F750x8 documentation rather than applying settings from another STM32 family member.
Informations de conformité
The verified catalog excerpts identify the device as an STM32F750x8 Arm Cortex-M7 microcontroller in a 144-LQFP package but do not state the compliance declarations for this exact ordering code. Confirm RoHS, REACH, halogen-free, and conflict-minerals status against the current manufacturer product documentation and the supplier's declaration.