STM32H747BGT6 - Dual Cortex-M7/M4 MCU, 1MB Flash | STMicroelectronics
Référence : STM32H747BGT6 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $23.55 | $23,55 |
| 10 | $22.1 | $221,00 |
| 100 | $19.85 | $1 985,00 |
| 500 | $18.4 | $9 200,00 |
| 1 000 | $17.1 | $17 100,00 |
STM32H747BGT6 Présentation
A microcontroller (MCU) is a compact integrated circuit that embeds a processor core, memory, and programmable peripherals to govern a specific operation in an embedded system. The STM32H747BGT6 belongs to the high-performance STM32H7 family, which sits at the top of ST's MCU portfolio and offers the highest clock speeds and the most advanced feature set for industrial control, motor control, audio processing, and human-machine interface (HMI) applications. The dual-core heterogeneous architecture combines a Cortex-M7 for high-throughput DSP and graphics tasks with a Cortex-M4 for real-time deterministic control.
Key features include 1 MB of Flash, 1 MB of SRAM, a Chrom-ART hardware graphics accelerator, a hardware cryptographic accelerator, and a rich communication peripheral set including Ethernet, USB, CAN-FD, and multiple I2C, SPI, and UART interfaces. The integrated SMPS step-down converter enables efficient core power regulation from a single 3.3 V rail. An on-board DSI host and TFT-LCD controller support advanced HMI designs.
The STM32H747BGT6 is fabricated on a 40 nm low-power process, supports a 1.62 V to 3.6 V supply range, and operates from -40 °C to +85 °C. The dual-core architecture allows the M7 core to offload real-time tasks to the M4 core, enabling parallel processing across heterogeneous workloads. Hardware isolation mechanisms include an MPU, secure boot, and a true random number generator (TRNG).
Typical applications include industrial automation controllers, motor control and field-oriented-control (FOC) drives, audio processing and effects units, smart-home edge controllers, and high-end consumer electronics with graphical HMI. The rich peripheral set and dual-core architecture make it ideal for complex systems that combine high-speed data processing with deterministic real-time control.
When designing with this device, ensure adequate decoupling on every VDD pin and provide a 4.7 µF bulk capacitor close to the SMPS inductor. Plan PCB thermal dissipation for the LQFP-208 package, and leverage the M4 low-power domain to maximize energy efficiency in battery-powered applications. The package pinout is documented in the ST datasheet referenced below.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a single reference for engineers and procurement teams evaluating the STM32H747BGT6.
Alternatives de remplacement direct pour STM32H747BGT6 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec STM32H747BGT6 (même facteur de forme et même empreinte) — différant par Communication Interfaces, Package, Operating Temperature, Flash Memory, SRAM.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
STM32H745BGT6
✅ Remplacement direct✓ En stock
$11.6 / unité
Voir la fiche technique →STM32H753BGT6
✅ Remplacement direct✓ En stock
$11.5 / unité
Voir la fiche technique →STM32H742VIT6
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$8.5 / unité
Voir la fiche technique →ES32H747XIH6U
✅ Remplacement direct✓ En stock
$19.75 / unité
Voir la fiche technique →STM32H755ZIT6
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$16.19 / unité
Voir la fiche technique →GD32H737IET6
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
STM32H747BGT6 Valeurs maximales et caractéristiques électriques
| Core Architecture | Dual-core Arm Cortex-M7 + Cortex-M4 |
| Cortex-M7 Max Frequency | 480 MHz |
| Cortex-M4 Max Frequency | 240 MHz |
| Flash Memory | 1 MB |
| SRAM | 1 MB |
| Operating Voltage Range | 1.62 V to 3.6 V |
| Supply Voltage (typical) | 3.3 V |
| Plage de température de fonctionnement | -40 °C to +85 °C |
| Boîtier | LQFP-208 (28 x 28 mm) |
| Nombre de broches | 208 |
| On-chip SMPS | Yes (integrated DC-DC step-down) |
| Communication Interfaces | Ethernet, USB 2.0 OTG, CAN-FD, I2C, SPI, UART |
| Graphics Accelerator | Chrom-ART (DMA2D) |
| Hardware Cryptography | AES, Hash, TRNG |
| Type de montage | Surface Mount |
| Statut RoHS | Compliant |
| Niveau MSL | 3 |
| Data Cache / I-Cache | Yes (per core) |
Guide de configuration des broches du STM32H747BGT6 lqfp-208 (28 x 28 mm)
Configuration des broches du STM32H747BGT6 (boîtier lqfp-208 (28 x 28 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour STM32H747BGT6.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
STM32H747BGT6 convient pour 6 applications: Industrial Motor Control (FOC), Human-Machine Interface (HMI) with TFT Display, Industrial IoT Edge Gateway with Secure Boot, Professional Audio Effects Processor, Medical Patient Monitoring Device, Smart Home Edge Controller with Voice Recognition.
Industrial Motor Control (FOC)
Field-oriented control of PMSM and BLDC motors. The STM32H747BGT6's 480 MHz Cortex-M7 executes the FOC algorithm inside a 10 kHz torque loop while the Cortex-M4 companion manages CANopen or EtherCAT communication. The device's advanced timers (TIM1/TIM8) provide complementary PWM outputs with hardware dead-time insertion, the on-chip ADCs sample current at >2 MSPS for instantaneous current reconstruction, and the integrated CORDIC accelerator (where available) offloads trigonometric calculations. The 1 MB SRAM allows full-speed encoder feedback loop logging and parameter auto-identification without external memory.
Recommandé
Human-Machine Interface (HMI) with TFT Display
Driving TFT-LCD panels up to 1024x768 and rendering LVGL/EmWin graphical interfaces. The STM32H747BGT6's integrated DSI host and Chrom-ART graphics accelerator enable smooth 2D blitting and text rendering, while the LTDC controller outputs 24-bit RGB at up to 90 MHz pixel clock. The 1 MB Flash and 1 MB SRAM accommodate full-screen framebuffers and asset storage for embedded GUI frameworks. The Cortex-M4 core can offload touch-screen scanning and audio feedback handling, leaving the M7 core dedicated to graphics rendering.
Recommandé
Industrial IoT Edge Gateway with Secure Boot
Edge node collecting sensor data over Ethernet, CAN-FD, and SPI while authenticating firmware. The STM32H747BGT6's integrated Ethernet MAC and FDCAN peripheral support industrial protocols simultaneously, while the AES-256 and SHA-256 hardware accelerators perform authenticated firmware boot and TLS-1.3 handshake acceleration without software overhead. The Cortex-M4 core handles low-power housekeeping (LP-UART wake-up, sensor polling) while the Cortex-M7 handles edge inference and MQTT publish. The 1 MB Flash accommodates multi-firmware A/B banking with read-while-write support.
Recommandé
Professional Audio Effects Processor
Real-time audio effects DSP for guitar pedals, mixers, and stand-alone effects units. The STM32H747BGT6's 480 MHz Cortex-M7 with double-precision FPU executes reverb, delay, modulation, and dynamics at 192 kHz sample rate within a 2.7 ms frame budget, leaving headroom for additional processing. The SAI (Serial Audio Interface) supports TDM and I2S protocols to dual-codec stereo I/O, the 1 MB SRAM accommodates multi-second delay line buffering, and the Cortex-M4 handles USB-MIDI Class compliant enumeration and rotary encoder scanning in parallel. AES hardware acceleration secures the unit against firmware cloning.
Recommandé
Medical Patient Monitoring Device
Multi-parameter vital signs monitor acquiring ECG, SpO2, and respiration in real time. The STM32H747BGT6's high-resolution ADCs (16-bit sigma-delta capable) interface directly with ECG front-ends such as the ADS129x family, while the Cortex-M7 runs DSP for QRS detection and heart-rate variability (HRV) calculation. The Cortex-M4 manages BLE-communicated (SPBTLE-RF) parameter display and user button handling. The hardware TRNG and secure boot ensure patient data integrity and tamper-evidence required by IEC 62304-1 documentation workflows.
Recommandé
Smart Home Edge Controller with Voice Recognition
Local voice command processing for smart-home hubs that need to run wake-word detection and intent inference on-device. The STM32H747BGT6's 480 MHz Cortex-M7 executes TensorFlow Lite Micro inference on a 6-layer CNN model for keyword spotting at 16 kHz sample rate with <50 ms latency. The Cortex-M4 handles Z-Wave / Zigbee radio control via SPI interfaces, while the M7 simultaneously runs the DSP pipeline and security protocol for cloud uplink. The integrated SMPS allows direct 5 V USB input for plug-and-play wall adapter deployment in home electronics.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour STM32H747BGT6 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | STM32H745BGT6 | STM32H753BGT6 | GD32H737IET6 |
|---|---|---|---|---|
| Package | LQFP-208 (28x28 mm) | LQFP-208 (28x28 mm) - same | LQFP-208 (28x28 mm) - same | LQFP-208 - same |
| Brand | STMicroelectronics | STMicroelectronics - same | STMicroelectronics - same | GigaDevice - different |
| Core Architecture | Dual Cortex-M7 + Cortex-M4 | Dual Cortex-M7 + Cortex-M4 - same | Single Cortex-M7 - different (no M4) | Dual Cortex-M7 + Cortex-M4 - same |
| M7 Clock Speed | 480 MHz | 480 MHz - same | 480 MHz - same | ~280 MHz - lower |
| M4 Clock Speed | 240 MHz | 240 MHz - same | N/A (no M4) | 240 MHz - same |
| Flash Memory | 1 MB | 1 MB - same | 2 MB - more | 1 MB - same |
| SRAM | 1 MB | 1 MB - same | 1 MB - same | 1 MB - same |
| Hardware Crypto Accelerator | Yes (AES, SHA, TRNG) | No - different | Yes - same | Limited |
| Integrated SMPS | Yes | Yes - same | Yes - same | Yes - same |
Principaux différenciateurs
- Heterogeneous dual-core M7 + M4 architecture (vs STM32H753BGT6)
- Hardware cryptographic and graphics accelerator blocks (vs STM32H745BGT6)
- ST ecosystem with STM32CubeMX and HAL libraries (vs GD32H737IET6)
Notes de conception
Estimated: The LQFP-208 package dissipates approximately 0.4 W per MHz at 480 MHz when all peripherals are active, requiring at least 4-layer PCB with a dedicated ground pour beneath the exposed pad area. Provide a 4.7 µF low-ESR ceramic capacitor directly on the VCORE pin (pin 49) and a 1 µF ceramic on each VDD pin, with vias stitched every 5 mm around the chip perimeter. Failure to provide adequate decoupling on the SMPS input (VDD, pin 1) will cause 480 MHz operation to fail due to SMPS ripple coupling into the M7 supply rail.
Estimated: With θJA of approximately 25 °C/W on a 4-layer JEDEC test board, the STM32H747BGT6's junction temperature rises approximately 25 °C above ambient at 1 W dissipation. For motor-control applications where the M7 core runs at full 480 MHz with both ADCs active, total power dissipation can reach 1.5 W (junction rise ~38 °C above ambient), requiring thermal relief through copper pours or active airflow. Industrial designs at 85 °C ambient should derate by ensuring junction temperature remains below 125 °C at full load.
Do not enable the on-chip SMPS without first verifying the external inductor value matches the datasheet recommendation (typically 4.7 µH with low DCR). The SMPS MUST have its own dedicated input capacitor on VDD_SMPS separate from the I/O VDD rail; mixing these causes an unstable 1.2 V core supply and erratic M7 core operation. Also verify pin-strapping of BOOT0 at reset - if BOOT0 is left floating, boot behavior is indeterminate. The device does not require external configuration of the integrated LDO if SMPS is enabled by default in the Option Bytes from factory.
Informations de conformité
Industrial grade operating temperature -40 °C to +85 °C. RoHS compliant per ST product page. Not AEC-Q100 qualified - choose STM32H747A/G automotive-grade variant for vehicle applications.
