XC6SLX75-N3FGG484C - 74,637-Cell Spartan-6 FPGA | AMD
Référence : XC6SLX75-N3FGG484C ✓ ActifXC6SLX75-N3FGG484C Présentation
A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interfaces, memory, and signal-processing functions can be programmed after manufacture. Within the device hierarchy, the XC6SLX75 belongs to the Spartan-6 LX FPGA family, which combines programmable logic blocks, hard DSP resources, memory, and high-speed I/O in one device. This integration reduces external-component requirements compared with a design assembled from separate programmable and fixed-function logic.
The device provides 74,637 logic cells, 5,831 configurable logic blocks or LABs, 3,170,304 RAM bits, and 280 I/O. Its 45 nm CMOS implementation operates from a 1.2 V core supply, while dedicated banks support the voltage requirements of connected interfaces. DSP48A1 slices support arithmetic-heavy signal processing, and SelectIO resources provide programmable interface behavior for systems that need deterministic control over edge rates, delay, and I/O standards.
The -3N ordering code identifies the device within the Spartan-6 LX speed and temperature options. The FGG484 designation corresponds to the 484-pin fine-pitch BGA package, while the trailing C identifies the commercial temperature option. Spartan-6 devices also support configuration options, system-level power-management modes, AES-based IP security, and Device DNA protection, making the family suitable for designs requiring controlled configuration access and deterministic startup behavior.
Typical uses include industrial control, instrumentation, embedded video processing, communications equipment, test and measurement, and high-density digital signal-processing systems. The large logic-cell count and dedicated DSP slices allow designers to implement parallel filters, protocol engines, control logic, and data acquisition functions in one device. The 280 I/O and 1.2 V core architecture are particularly useful for systems connecting external memory, converters, transceivers, and high-speed parallel interfaces.
PCB design must account for the FBGA footprint, multilayer escape routing, supply-decoupling requirements, configuration-interface access, and thermal performance under sustained logic activity. Designers should use the pinout, recommended power architecture, and decoupling guidance in the manufacturer datasheet and should validate signal-integrity and power-integrity behavior at the intended clock and I/O rates.
This page organizes the device specifications, package constraints, sourcing information, verified drop-in family variants, comparison parameters, and practical design guidance. It also distinguishes ordering-code differences among same-footprint Spartan-6 LX devices so engineers can identify a replacement without assuming that every suffix combination is electrically or commercially interchangeable.
Alternatives de remplacement direct pour XC6SLX75-N3FGG484C — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec XC6SLX75-N3FGG484C (même facteur de forme et même empreinte) — différant par Speed Grade, Logic Cells, Mounting Type, Device Type, Package.
XC6SLX75-3FGG484C
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC6SLX75-3NFGG484C
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC6SLX75-N3FG484I
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC6SLX75-2FGG484C
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC6SLX75-2FGG484I
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC6SLX75-N3FGG484C Valeurs maximales et caractéristiques électriques
| Device Type | Spartan-6 LX field-programmable gate array |
| Logic Cells | 74,637 cells |
| Configurable Logic Blocks | 5,831 LABs |
| Total RAM | 3,170,304 bits |
| Number of I/O | 280 I/O |
| Process Technology | 45 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Boîtier | 484-pin FBGA |
| Package Body Size | 23 mm x 23 mm |
| Package Pitch | 1.0 mm |
| Type de montage | Surface mount |
| Température de fonctionnement | 0°C to 85°C |
| Standard Packaging Quantity | 60 units per tray |
| Configuration Security | AES IP security and Device DNA protection |
| Statut RoHS | unknown |
| REACH Status | unknown |
Guide de configuration des broches du XC6SLX75-N3FGG484C 1.0 mm
Configuration des broches du XC6SLX75-N3FGG484C (boîtier 1.0 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour XC6SLX75-N3FGG484C.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
XC6SLX75-N3FGG484C convient pour 6 applications: Industrial Control and Automation, Embedded Video Processing, Digital Signal Processing, Test and Measurement Instrumentation, Communications and Protocol Processing, Data Acquisition and Control.
Industrial Control and Automation
The XC6SLX75-N3FGG484C fits industrial controllers that combine sequencing, monitoring, communications, and motion-control logic in one device. Its 74,637 logic cells and 5,831 LABs provide substantial parallel processing capacity, while 280 I/O allow direct connection to sensors, actuators, encoders, and discrete control interfaces. The 1.2 V core supply supports a compact FPGA-based control architecture, and DSP48A1 slices can accelerate filtering or supervisory calculations. Design considerations include separating digital and analog grounds, honoring bank-specific VCCO requirements, and using the manufacturer recommended capacitor placement to control supply ripple during switching transitions.
Recommandé
Embedded Video Processing
The XC6SLX75-N3FGG484C can implement video timing, pixel pipelines, color processing, and system control within a single programmable device. Its 280 I/O support parallel sensor or display interfaces, while 3,170,304 RAM bits provide line buffers and working storage for moderate-resolution image processing. DSP48A1 resources can implement filters and arithmetic stages without relying entirely on external processors. The practical benefit is deterministic parallel execution, although image throughput depends on the selected clock rates, memory bandwidth, and I/O standards. PCB planning should account for escape routing from the 484-pin FBGA and controlled impedance on high-speed video interfaces.
Recommandé
Digital Signal Processing
The XC6SLX75-N3FGG484C is appropriate for parallel filtering, modulation, correlation, and fixed-point signal-processing systems because its Spartan-6 LX architecture combines 74,637 logic cells with dedicated DSP48A1 slices and 3,170,304 RAM bits. Parallel datapaths can distribute work across multiple arithmetic pipelines, while block RAM can hold coefficients and sample histories. Compared with a sequential microcontroller implementation, the FPGA can process multiple samples or channels concurrently under deterministic control. Designers should select DSP block parameters carefully to avoid routing congestion, and should validate numerical behavior at the intended operating frequency before fixing the clocking architecture.
Recommandé
Test and Measurement Instrumentation
The XC6SLX75-N3FGG484C supports instrumentation designs requiring deterministic acquisition timing, extensive digital control, and programmable signal processing. Its 280 I/O can connect control buses, status lines, data converters, memory, and communication PHYs, while the 1.2 V core architecture allows logic to be consolidated into a smaller board area. DSP48A1 resources can implement digital correction and real-time transformations, and the large RAM resource can support buffering. For accurate measurements, engineer the clock and data-capture paths for deterministic timing, use separate supplies where required, and verify board-level jitter, isolation, and analog-noise behavior rather than relying only on FPGA simulation.
Recommandé
Communications and Protocol Processing
The XC6SLX75-N3FGG484C can serve as a programmable communications controller for packet handling, channelization, clock recovery, and custom serial interfaces. The 74,637-cell logic fabric supports parallel state machines and protocol engines, while DSP48A1 slices are useful for filters, symbol manipulation, and other arithmetic operations. Its 280 I/O provide substantial connectivity to transceivers, memories, and control logic. The key design trade-off is routing: high-throughput datapaths may consume substantial interconnect and block-RAM resources, so placement and timing constraints should be reviewed early. Configuration security should also be enabled when the design contains proprietary protocols or firmware.
Recommandé
Data Acquisition and Control
The XC6SLX75-N3FGG484C fits parallel data-acquisition systems where multiple converter outputs must be sampled, filtered, buffered, and transferred. Its 280 I/O can accommodate substantial parallel connectivity, while 3,170,304 RAM bits provide capture buffers and DSP48A1 slices can execute real-time correction or decimation algorithms. The FPGA architecture allows acquisition and control functions to share a device without a separate processor, reducing system complexity. Practical implementation depends on using clock-capable inputs correctly, assigning compatible VCCO levels to each bank, and placing decoupling and clock circuitry close to the device. Input timing and output settling must be validated with the actual converter and board implementation.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour XC6SLX75-N3FGG484C — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | XC6SLX75-3FGG484C | XC6SLX75-3NFGG484C | XC6SLX75-N3FG484I | XC6SLX75-2FGG484C | XC6SLX75-2FGG484I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 484-pin FBGA | 484-pin FBGA | 484-pin FBGA | 484-pin FBGA | 484-pin FBGA | 484-pin FBGA |
| FPGA Family | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX |
| Logic Cells | 74,637 cells | 74,637 cells | 74,637 cells | 74,637 cells | 74,637 cells | 74,637 cells |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Process Technology | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS |
| Speed Grade | -3N ordering code | -3 | -3N | -3N ordering code with I suffix | -2 | -2 with I suffix |
Principaux différenciateurs
- Direct -3N commercial-temperature ordering option (vs XC6SLX75-3FGG484C)
- Industrial-temperature same-footprint option (vs XC6SLX75-N3FG484I)
- Higher numeric speed option remains footprint-compatible (vs XC6SLX75-2FGG484C)
Notes de conception
Use separate 1.2 V core and bank-specific VCCO supplies as defined by the manufacturer power architecture. Place all required bypass capacitors at the pins identified in the datasheet, keep the core and I/O supply paths independent until their specified connection points, and verify sequencing at power-up and power-down. Estimated dissipation for a given design is the sum of core, I/O, DSP, clock, and auxiliary-rail loads; calculate it with actual utilization rather than the maximum theoretical resource count.
The 484-pin FBGA requires a multilayer PCB with short via connections between outer and inner layers. Follow the manufacturer escape-routing and via-array guidance for the FGG484 footprint, paying particular attention to power balls, configuration pins, clock-capable inputs, and VREF pins. Do not route high-speed interfaces beneath the BGA unless the stack-up and return path have been analyzed. Confirm pad and antipad dimensions against the current package drawing before releasing artwork.
Estimate junction temperature from measured or calculated device power, the applicable junction-to-ambient thermal resistance, and the actual PCB construction. Estimated: junction rise equals total dissipated power multiplied by the effective thermal resistance of the assembled board. Because a 23 mm x 23 mm BGA is not a heat sink by itself, provide top-side copper where layout rules allow, use thermal vias beneath the device, and evaluate airflow or a heat spreader for sustained high-utilization operation.
A matching FBGA outline does not by itself establish drop-in equivalence. Confirm every ball assignment, speed grade, temperature grade, configuration interface, power pin, VREF connection, and exposed thermal feature against the manufacturer package data. The -2 and -3 speed grades may share a footprint but can change timing closure and performance margins. Similarly, C and I suffix changes require an environmental review even when the logic resources are identical.
Informations de conformité
No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement for the exact XC6SLX75-N3FGG484C was identified. The device is an industrial FPGA and is not categorized as an automotive AEC-Q100-qualified component.