XC7Z020-1CLG484C - 667MHz Zynq-7000 SoC FPGA | AMD
Référence : XC7Z020-1CLG484C ✓ ActifXC7Z020-1CLG484C Présentation
A Zynq-7000 SoC is a programmable logic device that incorporates a hard processor subsystem with an FPGA fabric. The processor subsystem provides Arm Cortex-A9 software execution, while the Artix-7 fabric implements parallel data paths, custom interfaces, accelerators, and real-time control logic. In the system hierarchy, the XC7Z020 belongs to the SoC, FPGA and CPLD, embedded processor, and programmable logic device categories.
The XC7Z020-1CLG484C includes two Arm Cortex-A9 processor cores, CoreSight debugging, 85,000 FPGA logic cells, and a stated operating frequency of 667 MHz. Its integrated architecture reduces the number of interconnects between the processor and programmable logic compared with a separate microcontroller-plus-FPGA design. The CLG484 package also supports memory interfaces, general-purpose I/O, configuration resources, and dedicated clock resources for embedded applications.
The key engineering benefit is deterministic hardware/software partitioning. Software running on the Cortex-A9 subsystem can control system tasks, while the FPGA fabric can execute parallel algorithms at hardware speed. This architecture is useful when a design requires flexible interfaces, substantial control logic, or dedicated acceleration without the component count of a two-chip solution. Exact memory width, I/O count, power figures, and temperature limits depend on the selected device configuration and are not stated in the product listing.
Typical applications include industrial vision, networked control systems, embedded data acquisition, communications equipment, sensor processing, and test-and-measurement instruments. The dual-core processor is suitable for supervisory software, networking stacks, or control loops, while the FPGA fabric can implement interfaces and data-processing pipelines that benefit from parallel execution.
PCB design should follow the AMD CLG484 package and pinout files because the 484-ball BGA requires careful escape-routing, via-in-pad or through-via planning, and adequate power and ground distribution. Confirm the power rails, decoupling requirements, configuration interface, memory topology, and exposed thermal requirements against the manufacturer documentation before releasing the layout.
This product record combines the exact orderable MPN, package information, logic-cell count, processor architecture, operating frequency, and pin-compatible Zynq-7000 alternatives. It also adds application guidance and PCB considerations that help engineers evaluate the device beyond a basic catalog listing.
Alternatives de remplacement direct pour XC7Z020-1CLG484C — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec XC7Z020-1CLG484C (même facteur de forme et même empreinte) — différant par Package, Speed Grade, Mounting Type, Logic Cells, FPGA Family.
XC7Z020-1CLG484I
✅ Remplacement direct✓ En stock
$45.9375 / unité
Voir la fiche technique →XC7Z020-2CLG484I
✅ Remplacement direct✗ Rupture de stock
$49 / unité
Voir la fiche technique →XC7Z020-2CLG484ES
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC7Z020-2CLG484E
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →XC7Z020-3CLG484E
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC7Z020-1CLG484C Valeurs maximales et caractéristiques électriques
| Device Type | Zynq-7000 application processor system-on-chip |
| Processor Cores | 2 Arm Cortex-A9 cores |
| Processor Architecture | ARMv7-A |
| CoreSight Support | Integrated |
| FPGA Family | Artix-7 |
| Logic Cells | 85,000 cells |
| Maximum Stated Frequency | 667 MHz |
| Boîtier | 484-CSPBGA, 19 mm x 19 mm |
| Ball Count | 484 balls |
| Type de montage | Surface mount BGA |
| Programmable Logic | Artix-7 FPGA fabric integrated with the application processor |
| Orderable Part Number | XC7Z020-1CLG484C |
| Statut RoHS | Compliant |
Guide de configuration des broches du XC7Z020-1CLG484C 484-cspbga, 19 mm x 19 mm
Configuration des broches du XC7Z020-1CLG484C (boîtier 484-cspbga, 19 mm x 19 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour XC7Z020-1CLG484C.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
XC7Z020-1CLG484C convient pour 6 applications: Industrial Vision Processing, Industrial Control Systems, Communications and Networked Equipment, Data Acquisition and Instrumentation, Sensor and Edge Processing, Aerospace and Defense Test Equipment.
Industrial Vision Processing
The XC7Z020-1CLG484C fits industrial vision systems that divide work between control software and parallel pixel processing. The two Arm Cortex-A9 cores can run camera control, communications, diagnostics, and higher-level machine logic, while the 85,000-cell Artix-7 FPGA fabric implements deterministic acquisition and filtering pipelines. Operating the processor and accelerator in one SoC reduces external chip-to-chip traffic compared with a separate processor and FPGA. The 667 MHz processor rating supports a clear partition between supervisory tasks and hardware pipelines, although image resolution, frame rate, external memory, and power limits must be evaluated before selecting the final configuration.
Recommandé
Industrial Control Systems
The XC7Z020-1CLG484C is suitable for industrial controllers requiring deterministic I/O handling alongside higher-level application software. Its dual Arm Cortex-A9 cores can execute motion sequencing, communications, diagnostics, and supervisory control, while the integrated FPGA fabric implements timing-critical state machines, signal conditioning, or fieldbus data paths. The single-package architecture also simplifies synchronization between software control and programmable hardware. Because the published 667 MHz figure describes the processor rather than every fabric timing path, designers must close timing for each implemented interface against the selected I/O standard and clocking scheme.
Recommandé
Communications and Networked Equipment
The XC7Z020-1CLG484C can divide communications processing between its Arm Cortex-A9 subsystem and FPGA fabric. Software can manage protocol stacks, configuration, telemetry, and network management, while programmable logic can accelerate packet handling, serialization, filtering, or custom physical-layer interfaces. This partitioning is valuable when a product must combine flexible protocol updates with deterministic throughput. The 85,000 available logic cells and 667 MHz processor rating provide a substantial mixed-signal implementation space, but board-level success depends on the selected memory architecture, external transceivers, clocking, and physical-layer standards.
Recommandé
Data Acquisition and Instrumentation
The XC7Z020-1CLG484C supports instrument designs that combine sampling control, calibration, data analysis, and user interfaces. The FPGA fabric can implement parallel ADC or DAC channels, trigger logic, digital filtering, and timing control, while the Cortex-A9 cores handle calibration algorithms, memory management, networking, and instrument control. Partitioning acquisition logic into hardware reduces the burden placed on the sequential processor and allows deterministic sampling behavior. The exact converter count, supported memory, and achievable sample rates depend on the selected external components and I/O implementation rather than the processor frequency alone.
Recommandé
Sensor and Edge Processing
The XC7Z020-1CLG484C is appropriate for edge devices that preprocess sensor data before forwarding decisions to a host. The Artix-7 fabric can execute parallel filtering, feature extraction, thresholding, or sensor fusion, while the Cortex-A9 subsystem performs device management, protocol handling, and higher-level analytics. Co-locating these functions can reduce raw-data transfer and enable programmable products to adapt without changing the PCB. Deployment suitability still depends on the sensor interface, memory capacity, operating-temperature qualification, power budget, and the availability of FPGA resources for the chosen algorithms.
Recommandé
Aerospace and Defense Test Equipment
The XC7Z020-1CLG484C can support programmable test, monitoring, and signal-analysis equipment when its exact qualification, temperature grade, and export-control requirements are satisfied. The processor subsystem can manage test sequencing, calibration, storage, and communication, while the FPGA fabric handles deterministic pattern generation, capture, and real-time signal processing. The integrated SoC architecture permits flexible partitioning while limiting inter-device bandwidth requirements. Engineers should select the appropriate orderable suffix for the deployment environment and verify lifecycle, radiation, temperature, and security requirements rather than assuming that package compatibility establishes full qualification.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour XC7Z020-1CLG484C — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | XC7Z020-1CLG484I | XC7Z020-2CLG484I | XC7Z020-2CLG484ES | XC7Z020-2CLG484E | XC7Z020-3CLG484E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 484-CSPBGA (19 mm x 19 mm) | 484-CSPBGA (CLG484) | 484-CSPBGA (CLG484) | 484-CSPBGA (CLG484) | 484-CSPBGA (CLG484) | 484-CSPBGA (CLG484) |
| Device Family | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 |
| Processor Cores | 2 Arm Cortex-A9 cores | 2 Arm Cortex-A9 cores | 2 Arm Cortex-A9 cores | 2 Arm Cortex-A9 cores | 2 Arm Cortex-A9 cores | 2 Arm Cortex-A9 cores |
| Logic Cells | 85,000 cells | 85,000 cells | 85,000 cells | 85,000 cells | 85,000 cells | 85,000 cells |
| CoreSight Support | Integrated | Integrated | Integrated | Integrated | Integrated | Integrated |
| FPGA Fabric | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Temperature Qualification | Commercial suffix C | Industrial suffix I | Industrial suffix I | Extended-temperature suffix ES | Extended-temperature suffix E | Extended-temperature suffix E |
Principaux différenciateurs
- Matches the original speed grade while offering an industrial-temperature order code (vs XC7Z020-1CLG484I)
- Higher speed grade remains mechanically compatible (vs XC7Z020-2CLG484I)
- Extended-temperature alternatives preserve the established board footprint (vs XC7Z020-2CLG484ES)
- Integrated processor and FPGA fabric consolidate two programmable roles (vs XC7Z020-3CLG484E)
Notes de conception
Use AMD's XC7Z020 CLG484 package file as the authority for every ball assignment and escape route. The 484-CSPBGA occupies a 19 mm by 19 mm land pattern and requires substantially more routing discipline than a perimeter package. Place input/output devices near their assigned balls, use a uniform BGA escape strategy, and verify via placement against the manufacturer stack-up and drilling guidance before signal-path routing.
Partition the design into processor, memory, configuration, and programmable-I/O power domains, then follow the manufacturer rail definitions and decoupling guidance. Do not infer the required capacitor values or rail sequence from the 667 MHz processor frequency; processor state, DDR memory activity, and FPGA utilization can materially change current demand. Perform worst-case power estimation across processor load, memory access, and concurrent fabric activity before finalizing the supply design.
Create separate, continuously referenced return paths for high-speed memory and programmable-I/O interfaces, paying particular attention to crosstalk between memory buses and sensitive or high-speed fabric interfaces. Match clock and data routing according to the selected memory and transceiver requirements. AMD's package pinout files, UG865 package guidance, and the applicable board-design reference should be used to confirm ball groups, constraints, and approved escape-routing patterns.
Do not substitute XC7Z020 CLG400 devices for the CLG484 footprint, and do not assume that every speed or temperature suffix is qualification-equivalent. The -1, -2, and -3 order codes affect performance characteristics, while C, I, E, and ES suffixes identify different qualification classes. Before releasing a substitution, verify the exact orderable MPN, pin configuration, operating-temperature requirements, timing closure, power budget, and device lifecycle status.
Informations de conformité
The component listing identifies the XC7Z020-1CLG484C as RoHS compliant. Other compliance declarations and qualification attributes are not stated.