XC7Z020-1CLG484C - 667MHz Zynq-7000 SoC FPGA | AMD
MPN: XC7Z020-1CLG484C ✓ فعالXC7Z020-1CLG484C جائزہ
A Zynq-7000 SoC is a programmable logic device that incorporates a hard processor subsystem with an FPGA fabric. The processor subsystem provides Arm Cortex-A9 software execution, while the Artix-7 fabric implements parallel data paths, custom interfaces, accelerators, and real-time control logic. In the system hierarchy, the XC7Z020 belongs to the SoC, FPGA and CPLD, embedded processor, and programmable logic device categories.
The XC7Z020-1CLG484C includes two Arm Cortex-A9 processor cores, CoreSight debugging, 85,000 FPGA logic cells, and a stated operating frequency of 667 MHz. Its integrated architecture reduces the number of interconnects between the processor and programmable logic compared with a separate microcontroller-plus-FPGA design. The CLG484 package also supports memory interfaces, general-purpose I/O, configuration resources, and dedicated clock resources for embedded applications.
The key engineering benefit is deterministic hardware/software partitioning. Software running on the Cortex-A9 subsystem can control system tasks, while the FPGA fabric can execute parallel algorithms at hardware speed. This architecture is useful when a design requires flexible interfaces, substantial control logic, or dedicated acceleration without the component count of a two-chip solution. Exact memory width, I/O count, power figures, and temperature limits depend on the selected device configuration and are not stated in the product listing.
Typical applications include industrial vision, networked control systems, embedded data acquisition, communications equipment, sensor processing, and test-and-measurement instruments. The dual-core processor is suitable for supervisory software, networking stacks, or control loops, while the FPGA fabric can implement interfaces and data-processing pipelines that benefit from parallel execution.
PCB design should follow the AMD CLG484 package and pinout files because the 484-ball BGA requires careful escape-routing, via-in-pad or through-via planning, and adequate power and ground distribution. Confirm the power rails, decoupling requirements, configuration interface, memory topology, and exposed thermal requirements against the manufacturer documentation before releasing the layout.
This product record combines the exact orderable MPN, package information, logic-cell count, processor architecture, operating frequency, and pin-compatible Zynq-7000 alternatives. It also adds application guidance and PCB considerations that help engineers evaluate the device beyond a basic catalog listing.
کے لیے ڈراپ اِن متبادل XC7Z020-1CLG484C — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں XC7Z020-1CLG484C (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Speed Grade, Mounting Type, Logic Cells, FPGA Family.
XC7Z020-1CLG484I
✅ ڈراپ-اِن✓ اسٹاک میں
$45.9375 / یونٹ
ڈیٹا شیٹ دیکھیں →XC7Z020-2CLG484I
✅ ڈراپ-اِن✗ اسٹاک سے باہر
$49 / یونٹ
ڈیٹا شیٹ دیکھیں →XC7Z020-2CLG484ES
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC7Z020-2CLG484E
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC7Z020-3CLG484E
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC7Z020-1CLG484C زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Device Type | Zynq-7000 application processor system-on-chip |
| Processor Cores | 2 Arm Cortex-A9 cores |
| Processor Architecture | ARMv7-A |
| CoreSight Support | Integrated |
| FPGA Family | Artix-7 |
| Logic Cells | 85,000 cells |
| Maximum Stated Frequency | 667 MHz |
| پیکیج | 484-CSPBGA, 19 mm x 19 mm |
| Ball Count | 484 balls |
| ماؤنٹنگ ٹائپ | Surface mount BGA |
| Programmable Logic | Artix-7 FPGA fabric integrated with the application processor |
| Orderable Part Number | XC7Z020-1CLG484C |
| RoHS اسٹیٹس | Compliant |
XC7Z020-1CLG484C 484-cspbga, 19 mm x 19 mm پن کنفیگریشن گائیڈ
XC7Z020-1CLG484C (484-cspbga, 19 mm x 19 mm پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں XC7Z020-1CLG484C.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
XC7Z020-1CLG484C کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Vision Processing, Industrial Control Systems, Communications and Networked Equipment, Data Acquisition and Instrumentation, Sensor and Edge Processing, Aerospace and Defense Test Equipment.
Industrial Vision Processing
The XC7Z020-1CLG484C fits industrial vision systems that divide work between control software and parallel pixel processing. The two Arm Cortex-A9 cores can run camera control, communications, diagnostics, and higher-level machine logic, while the 85,000-cell Artix-7 FPGA fabric implements deterministic acquisition and filtering pipelines. Operating the processor and accelerator in one SoC reduces external chip-to-chip traffic compared with a separate processor and FPGA. The 667 MHz processor rating supports a clear partition between supervisory tasks and hardware pipelines, although image resolution, frame rate, external memory, and power limits must be evaluated before selecting the final configuration.
تجویز کردہ
Industrial Control Systems
The XC7Z020-1CLG484C is suitable for industrial controllers requiring deterministic I/O handling alongside higher-level application software. Its dual Arm Cortex-A9 cores can execute motion sequencing, communications, diagnostics, and supervisory control, while the integrated FPGA fabric implements timing-critical state machines, signal conditioning, or fieldbus data paths. The single-package architecture also simplifies synchronization between software control and programmable hardware. Because the published 667 MHz figure describes the processor rather than every fabric timing path, designers must close timing for each implemented interface against the selected I/O standard and clocking scheme.
تجویز کردہ
Communications and Networked Equipment
The XC7Z020-1CLG484C can divide communications processing between its Arm Cortex-A9 subsystem and FPGA fabric. Software can manage protocol stacks, configuration, telemetry, and network management, while programmable logic can accelerate packet handling, serialization, filtering, or custom physical-layer interfaces. This partitioning is valuable when a product must combine flexible protocol updates with deterministic throughput. The 85,000 available logic cells and 667 MHz processor rating provide a substantial mixed-signal implementation space, but board-level success depends on the selected memory architecture, external transceivers, clocking, and physical-layer standards.
تجویز کردہ
Data Acquisition and Instrumentation
The XC7Z020-1CLG484C supports instrument designs that combine sampling control, calibration, data analysis, and user interfaces. The FPGA fabric can implement parallel ADC or DAC channels, trigger logic, digital filtering, and timing control, while the Cortex-A9 cores handle calibration algorithms, memory management, networking, and instrument control. Partitioning acquisition logic into hardware reduces the burden placed on the sequential processor and allows deterministic sampling behavior. The exact converter count, supported memory, and achievable sample rates depend on the selected external components and I/O implementation rather than the processor frequency alone.
تجویز کردہ
Sensor and Edge Processing
The XC7Z020-1CLG484C is appropriate for edge devices that preprocess sensor data before forwarding decisions to a host. The Artix-7 fabric can execute parallel filtering, feature extraction, thresholding, or sensor fusion, while the Cortex-A9 subsystem performs device management, protocol handling, and higher-level analytics. Co-locating these functions can reduce raw-data transfer and enable programmable products to adapt without changing the PCB. Deployment suitability still depends on the sensor interface, memory capacity, operating-temperature qualification, power budget, and the availability of FPGA resources for the chosen algorithms.
تجویز کردہ
Aerospace and Defense Test Equipment
The XC7Z020-1CLG484C can support programmable test, monitoring, and signal-analysis equipment when its exact qualification, temperature grade, and export-control requirements are satisfied. The processor subsystem can manage test sequencing, calibration, storage, and communication, while the FPGA fabric handles deterministic pattern generation, capture, and real-time signal processing. The integrated SoC architecture permits flexible partitioning while limiting inter-device bandwidth requirements. Engineers should select the appropriate orderable suffix for the deployment environment and verify lifecycle, radiation, temperature, and security requirements rather than assuming that package compatibility establishes full qualification.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا XC7Z020-1CLG484C — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | XC7Z020-1CLG484I | XC7Z020-2CLG484I | XC7Z020-2CLG484ES | XC7Z020-2CLG484E | XC7Z020-3CLG484E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 484-CSPBGA (19 mm x 19 mm) | 484-CSPBGA (CLG484) | 484-CSPBGA (CLG484) | 484-CSPBGA (CLG484) | 484-CSPBGA (CLG484) | 484-CSPBGA (CLG484) |
| Device Family | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 |
| Processor Cores | 2 Arm Cortex-A9 cores | 2 Arm Cortex-A9 cores | 2 Arm Cortex-A9 cores | 2 Arm Cortex-A9 cores | 2 Arm Cortex-A9 cores | 2 Arm Cortex-A9 cores |
| Logic Cells | 85,000 cells | 85,000 cells | 85,000 cells | 85,000 cells | 85,000 cells | 85,000 cells |
| CoreSight Support | Integrated | Integrated | Integrated | Integrated | Integrated | Integrated |
| FPGA Fabric | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Temperature Qualification | Commercial suffix C | Industrial suffix I | Industrial suffix I | Extended-temperature suffix ES | Extended-temperature suffix E | Extended-temperature suffix E |
اہم امتیازی خصوصیات
- Matches the original speed grade while offering an industrial-temperature order code (بمقابلہXC7Z020-1CLG484I)
- Higher speed grade remains mechanically compatible (بمقابلہXC7Z020-2CLG484I)
- Extended-temperature alternatives preserve the established board footprint (بمقابلہXC7Z020-2CLG484ES)
- Integrated processor and FPGA fabric consolidate two programmable roles (بمقابلہXC7Z020-3CLG484E)
ڈیزائن نوٹس
Use AMD's XC7Z020 CLG484 package file as the authority for every ball assignment and escape route. The 484-CSPBGA occupies a 19 mm by 19 mm land pattern and requires substantially more routing discipline than a perimeter package. Place input/output devices near their assigned balls, use a uniform BGA escape strategy, and verify via placement against the manufacturer stack-up and drilling guidance before signal-path routing.
Partition the design into processor, memory, configuration, and programmable-I/O power domains, then follow the manufacturer rail definitions and decoupling guidance. Do not infer the required capacitor values or rail sequence from the 667 MHz processor frequency; processor state, DDR memory activity, and FPGA utilization can materially change current demand. Perform worst-case power estimation across processor load, memory access, and concurrent fabric activity before finalizing the supply design.
Create separate, continuously referenced return paths for high-speed memory and programmable-I/O interfaces, paying particular attention to crosstalk between memory buses and sensitive or high-speed fabric interfaces. Match clock and data routing according to the selected memory and transceiver requirements. AMD's package pinout files, UG865 package guidance, and the applicable board-design reference should be used to confirm ball groups, constraints, and approved escape-routing patterns.
Do not substitute XC7Z020 CLG400 devices for the CLG484 footprint, and do not assume that every speed or temperature suffix is qualification-equivalent. The -1, -2, and -3 order codes affect performance characteristics, while C, I, E, and ES suffixes identify different qualification classes. Before releasing a substitution, verify the exact orderable MPN, pin configuration, operating-temperature requirements, timing closure, power budget, and device lifecycle status.
تعمیل کی معلومات
The component listing identifies the XC7Z020-1CLG484C as RoHS compliant. Other compliance declarations and qualification attributes are not stated.