AD842JN vs AD8002ANZ השוואה

השוואה מפורטת זה לצד זה של AD842JN מאת Analog Devices ו AD8002ANZ מאת Analog Devices. השווה מפרטים עיקריים, פרמטרים חשמליים, אריזה, סטטוס מחזור חיים, תמחור וזמינות כדי לקבוע את הרכיב הטוב ביותר לדרישות העיצוב שלך.

Analog Devices
AD8002ANZ AD8002ANZ - Dual 600 MHz CFA, 50 mW | Analog Devices

AD8002ANZ - Dual 600 MHz CFA, 50 mW | Analog Devices

AD8002ANZ ✓ פעיל

השוואת מפרטים

פרמטר AD842JN AD8002ANZ
מותג Analog Devices Analog Devices
קטגוריה Amplifier ICs Amplifier ICs
סטטוס מחזור חיים פעיל פעיל
Product Type Single wideband precision operational amplifier —
Gain-Bandwidth Product 80 MHz —
Minimum Stable Gain 2 —
Supply Voltage Range +/-5 V to +/-18 V [DATA_NEEDED: supply voltage range]
Minimum Output Current Drive 100 mA —
Input Offset Voltage [DATA_NEEDED: input offset voltage] [DATA_NEEDED: input offset voltage]
Input Bias Current [DATA_NEEDED: input bias current] —
Slew Rate [DATA_NEEDED: slew rate] 1200 V/µs
Open-Loop Gain [DATA_NEEDED: open-loop gain] —
Common-Mode Rejection Ratio [DATA_NEEDED: common-mode rejection ratio] —
Power-Supply Rejection Ratio [DATA_NEEDED: power-supply rejection ratio] —
Input Noise Density [DATA_NEEDED: input noise density] —
Output Voltage Swing [DATA_NEEDED: output voltage swing] —
טווח טמפרטורת פעולה [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
מארז 14-pin PDIP 8-lead plastic DIP, 0.300 inch (7.62 mm) pitch
סוג הרכבה Through-hole Through-hole
Process Technology Junction-isolated complementary bipolar (CB) process —
Short-Circuit Protection [DATA_NEEDED: short-circuit protection] —
סטטוס RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Amplifier Type — Current Feedback Amplifier
Number of Circuits — 2 circuits
Small-Signal Bandwidth at Gain +1 — 600 MHz (-3 dB)
Small-Signal Bandwidth at Gain +2 — 500 MHz (-3 dB)
Settling Time to 0.1% — 16 ns
Maximum Power Dissipation — 50 mW
Maximum Supply Current — 5.0 mA per amplifier
Nominal Supply Voltage — ±5 V
Gain Flatness — 0.1 dB to 60 MHz at gain +2 with RL = 150 ohm
Differential Gain Error — 0.01%
Differential Phase Error — 0.02 degrees
Packaging — Tube
Input Noise Voltage — [DATA_NEEDED: input noise voltage]
Output Current — [DATA_NEEDED: output current]

Datasheets ומשאבים

עיין בכל המוצרים צור BOM בקשת הצעת מחיר