Analog Devices

DG445DY+T - Quad 85Ω SPST Analog Switch | Analog Devices

MPN: DG445DY+T ✓ פעיל
±4.5 V to ±20 V Vdss 85 Ω Rds(on) 16-pin SOIC Package
כמות הזמנה מינימלית: 1 |

DG445DY+T סקירה

Analog Devices DG445DY+T is a quad-channel CMOS analog switch containing four independent 1:1 SPST switch circuits, each with an 85 Ω on-resistance, in a 16-pin SOIC package. The device supports ±4.5 V to ±20 V dual-supply operation and features guaranteed on-resistance matching of 4 Ω maximum between switches, together with guaranteed on-resistance flatness of 9 Ω maximum across the signal range.

An analog switch is a semiconductor device that routes electrical signals between circuit nodes under digital control. The DG445DY+T belongs to the CMOS analog-switch family, combining low on-resistance, normally open SPST topology, and TTL/CMOS-compatible control inputs. This places it within the broader signal-switching and interface-IC hierarchy, where accurate, low-distortion signal isolation is required in test, measurement, communication, and instrumentation systems.

Four independent switches allow one logic-control network to route four separate analog channels. Each channel provides 1:1 conduction when enabled and high impedance when disabled. The 85 Ω nominal on-resistance is suitable for many precision and medium-impedance signal paths, while matched switch behavior reduces gain variation when channels are exchanged during a measurement sequence. TTL-compatible control inputs also simplify interfacing with older digital logic families.

The redesigned DG444 and DG445 architecture improves channel-to-channel resistance matching to 4 Ω maximum and limits resistance variation over the operating signal range to 9 Ω maximum. These characteristics are particularly useful in multichannel measurement systems, where a single reference or source is routed among several inputs. Such matching helps preserve channel consistency, calibration integrity, and repeatability without requiring a separate relay for every signal path.

Typical uses include data-acquisition systems, automated test equipment, sample-and-hold circuits, signal isolation, analog test-point routing, and communication equipment. The DG445DY+T is also appropriate when one controller must select among several external inputs or distribute a source to multiple destinations. Designers should confirm the logic levels, supply rails, signal amplitude, bandwidth, and acceptable settling time for the intended application.

For layout, route each switched signal directly to its package pin and place the supply bypass capacitor close to the appropriate power pin. Avoid long traces and unnecessary stubs because parasitic capacitance can increase turn-on transients and contribute to signal distortion. The normally open architecture introduces no intentional closed-state signal path, but off-state leakage and charge injection should still be considered in high-impedance precision circuits.

This page combines the verified device identity, package and switching characteristics with practical selection guidance, application analysis, and pin-compatible family alternatives. It is intended to help engineers determine whether the DG445DY+T fits the required voltage, resistance, logic, package, and routing constraints before committing a board layout to production.

חלופות תחליף ישיר עבור DG445DY+T — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם DG445DY+T (אותו גורם צורה וטביעת רגל) — שונים ב On-Resistance, On-Resistance Flatness, On-Resistance Matching, Operating Temperature, Package.

Maxim Integrated
On-Resistance: 85 ohm
On-Resistance Flatness: 9 ohm maximum over the signal range
On-Resistance Matching: 4 ohm maximum between switches
השווה עם DG445DY+T →

DG445DY+

✅ Drop-In
Maxim Integrated
📦 16-SOIC
SPST, normally open · 4 independent channels · 85 ohm · 160 ohm · 4 ohm maximum between switches · 9 ohm maximum over the signal range · 10 V to 30 V · +/-4.5 V to +/-20 V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

DG445DY+

✅ Drop-In
Maxim Integrated
📦 16-SOIC
SPST, normally open · 4 independent channels · 85 ohm · 160 ohm · 4 ohm maximum between switches · 9 ohm maximum over the signal range · 10 V to 30 V · +/-4.5 V to +/-20 V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

DG445DY-E3

✅ Drop-In
📦 16-SOIC
Same 4-circuit 85 Ω SPST configuration and 16-SOIC footprint; ordering code differs in manufacturer suffix.

📋 חלופה להתייחסות (לא בקטלוג)

DG445DY-T1

✅ Drop-In
📦 16-SOIC
Same 4-circuit 85 Ω SPST configuration and 16-SOIC footprint; T1 variant is listed as obsolete.

📋 חלופה להתייחסות (לא בקטלוג)

DG445DY-T

✅ Drop-In
📦 16-SOIC
Same DG445 four-channel SPST family and 16-SOIC footprint; manufacturer and ordering suffix differ.

📋 חלופה להתייחסות (לא בקטלוג)

DG445DY+T דירוגים מרביים ומאפיינים חשמליים

Number of Switch Circuits 4 circuits
Configuration 4 x SPST normally open
Switching Ratio 1:1
On-Resistance 85 Ω
On-Resistance Matching 4 Ω maximum between switches
On-Resistance Flatness 9 Ω maximum over the signal range
Dual Supply Voltage Range ±4.5 V to ±20 V
Control Input Compatibility TTL and CMOS compatible
מארז 16-pin SOIC
סוג הרכבה Surface mount
Maximum Package Length 10 mm maximum
Maximum Package Height 1.55 mm maximum
טמפרטורת פעולה Up to +85 °C

מדריך תצורת פינים של DG445DY+T 1.55 mm maximum

תצורת פינים עבור DG445DY+T (מארזת 1.55 mm maximum). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 1.55 mm maximum עבור DG445DY+T

אין נתוני פריסת פינים מפורטים עבור DG445DY+T.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

DG445DY+T מתאים עבור 6 יישוםs: Automated Test Equipment Signal Routing, Multichannel Data Acquisition, Analog Signal Isolation, Sample-and-Hold Systems, Communications Signal Routing, Programmable Instrumentation.

🏭

Automated Test Equipment Signal Routing

The DG445DY+T fits automated test equipment that must connect several analog test points without using mechanical relays. Four independent SPST channels can each place 85 Ω on-resistance between a source and a destination under digital control. The family's 4 Ω maximum matching and 9 Ω maximum flatness help maintain channel consistency when measurements are repeated across different routes. Its 16-pin SOIC package simplifies surface-mount assembly, while the normally open topology prevents unintended closed-path signal loading. Design the fixture around the ±4.5 V to ±20 V dual-supply range and verify control thresholds against the selected logic family.

📊

Multichannel Data Acquisition

The DG445DY+T can route four sensed inputs into a shared acquisition or measurement channel in a data-acquisition system. Its four independent 1:1 switches provide 85 Ω on-resistance while the guaranteed 4 Ω maximum matching limits differences between switch paths. That consistency is useful when software compares channels or applies a common calibration factor. The 16-pin SOIC footprint supports compact analog boards, but designers should account for off-state leakage, charge injection, and input capacitance when using high-impedance sensors. Supply bypassing and short signal traces are especially important for preserving measurement stability.

🛡️

Analog Signal Isolation

The DG445DY+T is useful for isolating an analog signal path from inactive branches of a test fixture or measurement system. Each normally open SPST switch presents high impedance when disabled and an 85 Ω connection when enabled, allowing one controller to determine which circuit receives the signal. The matched resistance characteristics reduce path-dependent errors when multiple nodes are scanned. Because a CMOS analog switch does not provide galvanic isolation, the device only handles electrical switching within its supply and absolute maximum limits; high-energy or hazardous signals require separate protection and isolation circuitry.

📈

Sample-and-Hold Systems

The DG445DY+T can implement channel selection ahead of sample-and-hold circuitry in precision measurement designs. Routing four sources through a matched group of SPST switches helps present more consistent impedance to the following amplifier or converter. The 85 Ω on-resistance is low enough for many medium-impedance sources, while the 4 Ω maximum matching improves repeatability across the four channels. Layout quality remains critical: place bypass capacitance near the power pins, minimize switched-node capacitance, and avoid long traces that increase settling time. The dual ±4.5 V to ±20 V operating range accommodates bipolar analog nodes around ground.

🌐

Communications Signal Routing

The DG445DY+T can route low-frequency or moderate-bandwidth analog signals among communication-system test points and functional blocks. Its four independent channels permit fast digital selection of a receive path, test path, or impedance-matched termination. The on-resistance matching of 4 Ω maximum and flatness of 9 Ω maximum help limit gain variation as the route changes. The device is not a high-frequency RF switch, so engineers should evaluate bandwidth, capacitance, insertion loss, and isolation from the family documentation before using it in RF paths. For baseband signaling, keep routing short and establish a common ground reference across the switched nodes.

🔬

Programmable Instrumentation

The DG445DY+T supports programmable front ends in laboratory and field instrumentation where one controller must select among several analog inputs. Four independent SPST switches reduce the number of discrete routing components while preserving TTL/CMOS-compatible control. The 16-pin SOIC package is practical for compact instrumentation boards, and the specified resistance matching helps keep channel calibration stable. Designers should use the pin-description table to assign the four channel pairs, place the supply bypass capacitor close to the device, and maintain the control inputs at defined levels during reset. Off-state leakage and charge injection remain important in high-impedance precision measurements.

סיכום מוצרים מומלצים

DG445DY Same-family four-channel SPST switch בשימוש ב-: Automated Test Equipment Signal Routing, Multichannel Data Acquisition, Sample-and-Hold Systems DG444DY Companion dual-channel complementary SPST switch בשימוש ב-: Automated Test Equipment Signal Routing, Analog Signal Isolation, Programmable Instrumentation MAX329CPE+ Low-leakage CMOS multiplexer for comparator functions בשימוש ב-: Multichannel Data Acquisition, Programmable Instrumentation DG445DY-T Pin-compatible family alternative בשימוש ב-: Analog Signal Isolation, Communications Signal Routing DG442DY+ Maxim Integrated בשימוש ב-: Sample-and-Hold Systems DG445DY-E3 Pin-compatible Vishay family option בשימוש ב-: Communications Signal Routing
What is the DG445DY+T and what does it do?
The DG445DY+T is a quad-channel CMOS analog switch with four independent 1:1 SPST, normally open switch circuits and an 85 Ω on-resistance. According to the Analog Devices DG445 product page, the redesigned family provides on-resistance matching of 4 Ω maximum between switches and guaranteed on-resistance flatness of 9 Ω maximum. It is packaged in a 16-pin SOIC for surface-mount PCB assembly.
What is the operating voltage range of DG445DY+T?
The DG445DY+T supports dual-supply operation from ±4.5 V to ±20 V. The Analog Devices DG445 family uses TTL-compatible and CMOS-compatible control inputs, allowing a system controller to operate the switches from conventional digital logic levels. Confirm that every switched signal remains within the device's absolute maximum ratings and that unused control inputs are driven to a defined state.
Where can I download the DG445DY+T datasheet PDF?
The official DG445 product information is available at Analog Devices' DG445 product page, which links the manufacturer documentation for the DG444 and DG445 family. Use that document for the authoritative pin descriptions, recommended operating conditions, electrical characteristics, and application guidance. The DG445DY+T ordering code identifies the tape-and-reel shipping form of the 16-pin SOIC device.
Where can I find the DG445DY+T pinout?
The DG445DY+T pinout is shown in the manufacturer datasheet under the pin-description and functional-block-diagram sections. The device uses a 16-pin SOIC package and contains four independent SPST channels, with paired drain and source terminals plus control and power pins. Use the pin-description table when assigning PCB nets because exposed supply and control details must be matched exactly to the specific package drawing.
Is DG445DY+T suitable for high-impedance measurement systems?
The DG445DY+T can suit many high-impedance measurement systems because it provides four independent channels, 4 Ω maximum on-resistance matching, and 9 Ω maximum on-resistance flatness. According to the Analog Devices DG445 product page, the improved matching helps switches conduct equally well in either direction. Signal accuracy must still be assessed against off-state leakage, charge injection, input capacitance, and the source impedance of the selected channel.
How does the DG445DY+T compare with DG445DY?
DG445DY+T and DG445DY identify the same DG445 family and 16-pin SOIC switching function, with the +T ordering suffix distinguishing the tape-and-reel shipping form. The identified device provides four independent 85 Ω SPST switches and matches the DG445 family's 4 Ω maximum resistance matching and 9 Ω maximum flatness. Confirm the exact suffix, termination, and packaging requirements before treating one ordering code as interchangeable with another.
What can replace the DG445DY+T as a drop-in switch?
The DG445DY family offers the closest drop-in choices because it preserves four independent SPST channels, 85 Ω on-resistance, and the 16-pin SOIC footprint. DG445DY, Vishay DG445DY, Vishay DG445DY-E3, Vishay DG445DY-T1, and Renesas DG445DY-T appear in the cross-reference results. Verify supply compatibility, control thresholds, pin assignments, and lifecycle requirements before production substitution.
Is DG445DY+T the same as DG445DY?
DG445DY+T and DG445DY are ordering variants of the same DG445 switching family rather than different functional architectures. Both are associated with four 1:1 SPST channels, 85 Ω on-resistance, and a 16-pin SOIC package. The +T suffix identifies the tape-and-reel packing form, so the mechanical handling and orderable quantity can differ even when the circuit functions match.
When should I choose DG445DY+T over another DG445-family part?
Choose DG445DY+T when the design needs four independent normally open SPST analog switches in a 16-pin SOIC and requires the tape-and-reel ordering form. It is especially useful when channel-to-channel resistance matching matters in a measurement matrix. Select another listed family member when a different lifecycle status, manufacturer sourcing path, or orderable packaging configuration better matches the production plan.
Is DG445DY+T suitable for automated test equipment?
The DG445DY+T is well suited to automated test equipment because four independent SPST channels can route test signals under digital control. Its 4 Ω maximum on-resistance matching and 9 Ω maximum flatness reduce channel-dependent variation when the same source is presented through different paths. The 16-pin SOIC package also supports compact, surface-mount routing, provided the board honors the manufacturer’s pin and layout guidance.
What are the key specifications of DG445DY+T that engineers should know?
The DG445DY+T combines four independent 1:1 SPST channels, 85 Ω on-resistance, ±4.5 V to ±20 V dual-supply operation, and TTL/CMOS-compatible control in a 16-pin SOIC package. The Analog Devices DG445 product page specifies on-resistance matching of 4 Ω maximum between switches and on-resistance flatness of 9 Ω maximum over the signal range. These parameters define its suitability for multichannel analog routing.
What is the best Vishay equivalent for DG445DY+T?
The Vishay DG445DY and DG445DY-E3 are the closest listed Vishay equivalents because each is identified as a four-circuit, 1:1, 85 Ω SPST device in a 16-pin SOIC package. The Vishay DG445DY-T1 is another family member, although its listed status is obsolete. Final substitution requires checking pin-level behavior, logic thresholds, supply limits, temperature range, and lifecycle constraints against the DG445DY+T.
Where can I buy DG445DY+T and check its lead time?
Use the Request a Quote form on this page to request DG445DY+T availability, current commercial terms, and a lead-time commitment for the required quantity. The target is listed as a 4-circuit, 1:1, 85 Ω switch in a 16-pin SOIC package, but current stock and delivery scheduling should be confirmed for the exact tape-and-reel ordering code before committing the build schedule.
What is the price of DG445DY+T?
Current commercial pricing for DG445DY+T should be obtained through the Request a Quote form on this page so the quantity, delivery schedule, and sourcing conditions can be evaluated together. The product is the +T tape-and-reel ordering variant of the 16-pin SOIC DG445 family, and the exact order quantity may affect commercial availability. No fixed unit price should be assumed without a current quotation.
Is DG445DY+T in stock and what is its lead time?
Stock and lead time for DG445DY+T should be confirmed through the Request a Quote form on this page. The device is an orderable tape-and-reel variant of the DG445 four-channel SPST analog-switch family, and production planners should specify the required reel quantity and target delivery date. The manufacturer product page remains the authoritative source for device status and documentation.

נתוני עזר הנדסיים עבור DG445DY+T — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose DG445DY+T for a new 16-pin SOIC design that requires four independent normally open SPST channels, 85 Ω on-resistance, TTL/CMOS-compatible control, and guaranteed resistance matching of 4 Ω maximum. It is particularly appropriate for multichannel automated test, data-acquisition, and programmable instrumentation circuits where channel consistency matters. DG445DY from Analog Devices is the closest functional choice when a different orderable packing form is appropriate. Vishay DG445DY and DG445DY-E3 can support dual-source procurement, but their electrical limits and lifecycle conditions require comparison with the Analog Devices specification. Renesas DG445DY-T is another pin-compatible family route. Avoid Vishay DG445DY-T1 for new production unless its obsolete status is formally accepted. In every case, verify pin assignments, control polarity, supply limits, temperature rating, bandwidth, leakage, and package dimensions before substitution.

השוואה עם חלופות

פרמטר מוצר זה DG445DY DG445DY DG445DY-E3 DG445DY-T1 DG445DY-T
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Brand Analog Devices Analog Devices Vishay Intertechnology Vishay Intertechnology Vishay Intertechnology Renesas Electronics
Number of Circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits
Configuration 4 x SPST 4 x SPST 4 x SPST 4 x SPST 4 x SPST 4 x SPST
Switching Ratio 1:1 1:1 1:1 1:1 1:1 1:1
On-Resistance 85 Ω 85 Ω 85 Ω 85 Ω 85 Ω 85 Ω
Control Interface TTL and CMOS compatible TTL and CMOS compatible TTL and CMOS compatible TTL and CMOS compatible TTL and CMOS compatible TTL and CMOS compatible

מבדילים עיקריים

  • Guaranteed channel-to-channel resistance matching (לעומתDG445DY-E3)
  • Guaranteed on-resistance flatness over the signal range (לעומתDG445DY-T)
  • Four-channel 85 Ω SPST switching in the standard 16-SOIC footprint (לעומתDG445DY-T1)
  • TTL and CMOS-compatible digital control (לעומתMAX329CPE+)

הערות תכנון

Keep every switched node short and connect it directly to the corresponding SOIC pin. Long copper traces and test pads add parasitic capacitance, which can increase switching transients and settling time. Place the supply bypass capacitor close to the device power pins, use a low-inductance ground connection, and avoid routing sensitive switched signals beneath unrelated noisy circuitry. The 16-pin footprint requires careful inspection of the manufacturer pin-description table because incorrect assignment of a source, drain, control, or supply pin can prevent proper operation.

Evaluate off-state leakage, charge injection, input capacitance, and on-resistance flatness together when the source impedance is high. The 4 Ω maximum matching and 9 Ω maximum flatness are useful for reducing channel variation, but they do not remove errors caused by leakage or injected charge. Use short control traces, defined control states during reset, and an acquisition sequence that allows sufficient settling time before each measurement. For high-bandwidth signals, verify bandwidth and isolation against the manufacturer characteristics rather than relying on the DC on-resistance alone.

Use the DG445DY+T within its ±4.5 V to ±20 V dual-supply range and observe the absolute maximum ratings for both supply rails and switched signals. Bypass each supply connection close to the package with the capacitance recommended by the manufacturer. Do not allow control-input voltage to exceed the permitted logic range, and do not assume that the off state provides isolation from hazardous voltage. Additional protection is required when the switched signal can exceed the device's rating or contain significant transient energy.

Do not substitute a DG442-family device solely because it appears in a parametric-equivalent listing. The DG445 family contains four independent SPST channels, so pin count alone does not establish functional compatibility. For every proposed replacement, compare the channel count, source and drain assignments, control polarity and thresholds, supply range, electrical characteristics, package drawing, temperature rating, and lifecycle status. Treat the Vishay DG445DY-T1 listing as obsolete and do not select it for a new production design without an explicit lifecycle review.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

A RoHS statement appears for a Vishay DG445DY-E3 listing, but it was not attributed directly to DG445DY+T. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status therefore remain unknown for the target ordering code.

חיפושים קשורים

DG445DY+T datasheet DG445DY+T datasheet pdf DG445DY+T pinout DG445DY+T equivalent DG445DY+T replacement DG445DY+T drop-in replacement DG445DY+T vs DG445DY DG445DY+T price DG445DY+T stock Analog Devices DG445DY+T DG445DY 85 ohm SPST switch DG445DY 16-SOIC footprint DG445DY analog switch application DG445DY pin configuration

רכיבים ומונחים קשורים

Analog Devices DG445DY+T DG445DY DG444DY DG445DY-E3 DG445DY-T1 DG445DY-T DG442DY+ MAX329CPE+ analog switch CMOS analog switch SPST switch normally open switch interface IC on-resistance on-resistance matching on-resistance flatness charge injection off-state leakage TTL-compatible control CMOS-compatible control 16-pin SOIC SOIC package family surface mount automated test equipment
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר