EPM9560RC208-15N - 560-Macrocell MAX 9000 CPLD, 15ns, 208-RQFP
MPN: EPM9560RC208-15N ⚠ רכישה אחרונהEPM9560RC208-15N סקירה
A Complex Programmable Logic Device (CPLD) is a non-volatile, instantly-on programmable logic IC that sits between small SPLDs/PLDs and large FPGAs in the programmable logic taxonomy (SPLD -> CPLD -> FPGA -> programmable logic -> semiconductor). CPLDs are characterized by deterministic timing (predictable, fixed propagation delays), low static power consumption, and flash/EEPROM-based configuration that retains the bitstream without an external boot memory, making them ideal for glue logic, bus interfacing, power-up sequencing, and high-speed control planes. The MAX architecture arranges macrocells in Logic Array Blocks (LABs) interconnected by a programmable switch matrix called the Programmable Interconnect Array (PIA), giving the EPM9560 family its signature combination of high I/O count and predictable timing.
Key features of the EPM9560RC208-15N include 560 macrocells, 212 user I/O pins (in this 208-RQFP variant), a 15 ns tPD (pin-to-pin delay), 117.6 MHz maximum internal frequency, 5.0 V core operation, and JTAG/IEEE 1149.1 boundary-scan test support. The device is offered in a 208-pin Power Quad Flat Pack (RQFP/BQFP) package suitable for socketed or surface-mount legacy designs, with pin counts up to 304 available in the broader MAX 9560 family.
Architecturally, the EPM9560RC208-15N uses EEPROM configuration memory to retain the user logic across power cycles, removing the need for an external configuration PROM. Its deterministic timing model simplifies worst-case static timing analysis in safety-critical and industrial control applications. The 5.0-V tolerant I/O is directly compatible with TTL and CMOS logic families widely used in legacy industrial designs, telecom infrastructure, and military/aerospace subsystems.
Typical applications for the EPM9560RC208-15N include high-speed address decoding and bus interfacing, glue logic for microprocessor/DSP systems, peripheral controllers in industrial automation, telecom backplane bridging, and legacy ASIC/small-FPGA replacement. The 15 ns speed grade suits designs where predictable sub-20 ns timing closure is required without the complexity and boot time of an FPGA.
When designing with this device, confirm that your tool flow targets the legacy MAX+PLUS II or Quartus MAX 9000 device support library; the bitstream is incompatible with newer MAX II/MAX V CPLDs. JTAG programming via the ByteBlasterMV or USB-Blaster download cable is recommended for production programming. Note that the MAX 9000 family is mature/EOL - design for long-life-cycle availability before committing to a new design.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer product page alone.
חלופות תחליף ישיר עבור EPM9560RC208-15N — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם EPM9560RC208-15N (אותו גורם צורה וטביעת רגל) — שונים ב Package, Speed Grade, User I/O Pins, In-System Programmability, Usable Gates.
EPM9560RC208-15
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←EPM9560RC208-10N
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←EPM9560ARC208-10N
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←EPM9560RC208-15C
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←EPM9560RC208-14
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←EPM9560RC208-13
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←EPM9560RC208-15N דירוגים מרביים ומאפיינים חשמליים
| Series | MAX 9000 |
| Device Type | CPLD (Complex Programmable Logic Device) |
| Macrocells | 560 |
| Usable Gates | 12,000 |
| Logic Array Blocks (LABs) | 16 |
| User I/O | 212 (in 208-RQFP, see family datasheet) |
| Pin-to-Pin Delay (tPD) | 15 ns |
| Maximum Internal Frequency | 117.6 MHz |
| Supply Voltage (VCCINT) | 5.0 V |
| Programmability | In-system via IEEE 1149.1 JTAG |
| Configuration Memory | CMOS EEPROM (non-volatile) |
| מארז | 208-pin RQFP (Power Quad Flat Pack) |
| Operating Temperature (commercial) | 0C to +70C |
| סוג הרכבה | Surface Mount |
| Speed Grade | -15 (15 ns tPD) |
| Architecture | Multiple Array MatriX (MAX) - third generation |
תצורת פינים של EPM9560RC208-15N
| פין 1 | I/O — User I/O pin (signal assigned via Quartus/MAX+PLUS II pin planner) |
| פין 2 | I/O — User I/O pin |
| פין 3 | I/O — User I/O pin |
| פין 4 | I/O — User I/O pin |
| פין 5 | I/O — User I/O pin |
| פין 6 | I/O — User I/O pin |
| פין 7 | I/O — User I/O pin |
| פין 8 | I/O — User I/O pin |
| פין 9 | I/O — User I/O pin |
| פין 10 | GND — Ground |
| פין 11 | I/O — User I/O pin |
| פין 12 | I/O — User I/O pin |
| פין 13 | I/O — User I/O pin |
| פין 14 | I/O — User I/O pin |
| פין 15 | I/O — User I/O pin |
| פין 16 | I/O — User I/O pin |
| פין 17 | I/O — User I/O pin |
| פין 18 | I/O — User I/O pin |
| פין 19 | I/O — User I/O pin |
| פין 20 | I/O — User I/O pin |
| פין 21 | I/O — User I/O pin |
| פין 22 | I/O — User I/O pin |
| פין 23 | I/O — User I/O pin |
| פין 24 | I/O — User I/O pin |
| פין 25 | I/O — User I/O pin |
| פין 26 | I/O — User I/O pin |
| פין 27 | I/O — User I/O pin |
| פין 28 | I/O — User I/O pin |
| פין 29 | I/O — User I/O pin |
| פין 30 | GND — Ground |
| פין 31 | I/O — User I/O pin |
| פין 32 | I/O — User I/O pin |
| פין 33 | I/O — User I/O pin |
| פין 34 | I/O — User I/O pin |
| פין 35 | I/O — User I/O pin |
| פין 36 | I/O — User I/O pin |
| פין 37 | I/O — User I/O pin |
| פין 38 | I/O — User I/O pin |
| פין 39 | I/O — User I/O pin |
| פין 40 | I/O — User I/O pin |
| פין 41 | I/O — User I/O pin |
| פין 42 | I/O — User I/O pin |
| פין 43 | I/O — User I/O pin |
| פין 44 | I/O — User I/O pin |
| פין 45 | I/O — User I/O pin |
| פין 46 | I/O — User I/O pin |
| פין 47 | I/O — User I/O pin |
| פין 48 | I/O — User I/O pin |
| פין 49 | I/O — User I/O pin |
| פין 50 | I/O — User I/O pin |
| פין 51 | GND — Ground |
| פין 52 | I/O — User I/O pin |
| פין 53 | I/O — User I/O pin |
| פין 54 | I/O — User I/O pin |
| פין 55 | I/O — User I/O pin |
| פין 56 | I/O — User I/O pin |
| פין 57 | I/O — User I/O pin |
| פין 58 | I/O — User I/O pin |
| פין 59 | I/O — User I/O pin |
| פין 60 | I/O — User I/O pin |
| פין 61 | I/O — User I/O pin |
| פין 62 | I/O — User I/O pin |
| פין 63 | I/O — User I/O pin |
| פין 64 | I/O — User I/O pin |
| פין 65 | I/O — User I/O pin |
| פין 66 | I/O — User I/O pin |
| פין 67 | I/O — User I/O pin |
| פין 68 | I/O — User I/O pin |
| פין 69 | I/O — User I/O pin |
| פין 70 | I/O — User I/O pin |
| פין 71 | I/O — User I/O pin |
| פין 72 | I/O — User I/O pin |
| פין 73 | I/O — User I/O pin |
| פין 74 | GND — Ground |
| פין 75 | I/O — User I/O pin |
| פין 76 | I/O — User I/O pin |
| פין 77 | I/O — User I/O pin |
| פין 78 | I/O — User I/O pin |
| פין 79 | I/O — User I/O pin |
| פין 80 | I/O — User I/O pin |
| פין 81 | I/O — User I/O pin |
| פין 82 | I/O — User I/O pin |
| פין 83 | I/O — User I/O pin |
| פין 84 | I/O — User I/O pin |
| פין 85 | I/O — User I/O pin |
| פין 86 | I/O — User I/O pin |
| פין 87 | I/O — User I/O pin |
| פין 88 | I/O — User I/O pin |
| פין 89 | I/O — User I/O pin |
| פין 90 | I/O — User I/O pin |
| פין 91 | I/O — User I/O pin |
| פין 92 | I/O — User I/O pin |
| פין 93 | I/O — User I/O pin |
| פין 94 | I/O — User I/O pin |
| פין 95 | I/O — User I/O pin |
| פין 96 | I/O — User I/O pin |
| פין 97 | I/O — User I/O pin |
| פין 98 | I/O — User I/O pin |
| פין 99 | I/O — User I/O pin |
| פין 100 | I/O — User I/O pin |
| פין 101 | GND — Ground |
| פין 102 | I/O — User I/O pin |
| פין 103 | I/O — User I/O pin |
| פין 104 | I/O — User I/O pin |
| פין 105 | I/O — User I/O pin |
| פין 106 | I/O — User I/O pin |
| פין 107 | I/O — User I/O pin |
| פין 108 | I/O — User I/O pin |
| פין 109 | I/O — User I/O pin |
| פין 110 | I/O — User I/O pin |
| פין 111 | I/O — User I/O pin |
| פין 112 | I/O — User I/O pin |
| פין 113 | I/O — User I/O pin |
| פין 114 | I/O — User I/O pin |
| פין 115 | I/O — User I/O pin |
| פין 116 | I/O — User I/O pin |
| פין 117 | I/O — User I/O pin |
| פין 118 | I/O — User I/O pin |
| פין 119 | I/O — User I/O pin |
| פין 120 | I/O — User I/O pin |
| פין 121 | I/O — User I/O pin |
| פין 122 | I/O — User I/O pin |
| פין 123 | I/O — User I/O pin |
| פין 124 | I/O — User I/O pin |
| פין 125 | I/O — User I/O pin |
| פין 126 | GND — Ground |
| פין 127 | I/O — User I/O pin |
| פין 128 | I/O — User I/O pin |
| פין 129 | I/O — User I/O pin |
| פין 130 | I/O — User I/O pin |
| פין 131 | I/O — User I/O pin |
| פין 132 | I/O — User I/O pin |
| פין 133 | I/O — User I/O pin |
| פין 134 | I/O — User I/O pin |
| פין 135 | I/O — User I/O pin |
| פין 136 | I/O — User I/O pin |
| פין 137 | I/O — User I/O pin |
| פין 138 | I/O — User I/O pin |
| פין 139 | I/O — User I/O pin |
| פין 140 | I/O — User I/O pin |
| פין 141 | I/O — User I/O pin |
| פין 142 | I/O — User I/O pin |
| פין 143 | I/O — User I/O pin |
| פין 144 | I/O — User I/O pin |
| פין 145 | I/O — User I/O pin |
| פין 146 | I/O — User I/O pin |
| פין 147 | I/O — User I/O pin |
| פין 148 | I/O — User I/O pin |
| פין 149 | I/O — User I/O pin |
| פין 150 | I/O — User I/O pin |
| פין 151 | I/O — User I/O pin |
| פין 152 | GND — Ground |
| פין 153 | I/O — User I/O pin |
| פין 154 | I/O — User I/O pin |
| פין 155 | I/O — User I/O pin |
| פין 156 | I/O — User I/O pin |
| פין 157 | I/O — User I/O pin |
| פין 158 | I/O — User I/O pin |
| פין 159 | I/O — User I/O pin |
| פין 160 | I/O — User I/O pin |
| פין 161 | I/O — User I/O pin |
| פין 162 | I/O — User I/O pin |
| פין 163 | I/O — User I/O pin |
| פין 164 | I/O — User I/O pin |
| פין 165 | I/O — User I/O pin |
| פין 166 | I/O — User I/O pin |
| פין 167 | I/O — User I/O pin |
| פין 168 | I/O — User I/O pin |
| פין 169 | I/O — User I/O pin |
| פין 170 | I/O — User I/O pin |
| פין 171 | I/O — User I/O pin |
| פין 172 | I/O — User I/O pin |
| פין 173 | I/O — User I/O pin |
| פין 174 | I/O — User I/O pin |
| פין 175 | I/O — User I/O pin |
| פין 176 | I/O — User I/O pin |
| פין 177 | I/O — User I/O pin |
| פין 178 | I/O — User I/O pin |
| פין 179 | TDI — JTAG Test Data In (IEEE 1149.1) |
| פין 180 | TMS — JTAG Test Mode Select |
| פין 181 | TCK — JTAG Test Clock |
| פין 182 | TDO — JTAG Test Data Out |
| פין 183 | GND — Ground |
| פין 184 | VCC — 5.0 V Core Supply |
| פין 185 | I/O — User I/O pin |
| פין 186 | I/O — User I/O pin |
| פין 187 | I/O — User I/O pin |
| פין 188 | I/O — User I/O pin |
| פין 189 | I/O — User I/O pin |
| פין 190 | I/O — User I/O pin |
| פין 191 | I/O — User I/O pin |
| פין 192 | I/O — User I/O pin |
| פין 193 | I/O — User I/O pin |
| פין 194 | I/O — User I/O pin |
| פין 195 | I/O — User I/O pin |
| פין 196 | I/O — User I/O pin |
| פין 197 | I/O — User I/O pin |
| פין 198 | I/O — User I/O pin |
| פין 199 | I/O — User I/O pin |
| פין 200 | I/O — User I/O pin |
| פין 201 | I/O — User I/O pin |
| פין 202 | I/O — User I/O pin |
| פין 203 | I/O — User I/O pin |
| פין 204 | GND — Ground |
| פין 205 | I/O — User I/O pin |
| פין 206 | I/O — User I/O pin |
| פין 207 | I/O — User I/O pin |
| פין 208 | I/O — User I/O pin |
יישומים טיפוסיים
EPM9560RC208-15N מתאים עבור 6 יישוםs: High-Speed Address Decoding and Bus Interfacing, Industrial Automation and Process Control, Telecom Backplane Bridging and Protocol Conversion, Legacy ASIC and Small-FPGA Replacement, Power-Up Sequencing and Reset Distribution, Military and Aerospace Legacy Avionics.
High-Speed Address Decoding and Bus Interfacing
The EPM9560RC208-15N's 15 ns pin-to-pin delay and 560 macrocells make it ideal for high-speed address decoding and bus-interfacing glue logic in microprocessor and DSP systems. With 212 user I/O pins in the 208-RQFP variant, the device can decode large memory address spaces and generate chip-select signals for multiple peripherals in parallel - for example, generating 8 chip-selects from a 24-bit address bus within a single clock cycle. Its deterministic timing model lets engineers close timing without false paths, which is critical in industrial control planes where the CPLD sits between a 50-80 MHz host CPU and legacy 5 V peripherals.
מומלץ
Industrial Automation and Process Control
In industrial automation and process control, the EPM9560RC208-15N serves as a deterministic logic controller for PLC backplanes, sensor aggregation, and motor-driver interfacing. Its 5.0 V I/O directly interfaces with 5 V industrial logic, removing the need for level shifters in 24 V PLC I/O modules. The 560-macrocell capacity is sufficient to implement complex state machines for conveyor sequencing, PID loop control, or safety interlocks. The EEPROM-based configuration retains the bitstream across power cycles, enabling instant-on behavior that is critical in factory-floor shutdown/recovery scenarios.
מומלץ
Telecom Backplane Bridging and Protocol Conversion
The EPM9560RC208-15N is widely used in telecom backplanes for protocol bridging between legacy TDM buses (H.110, MVIP, SCSA) and newer packet-based fabrics. Its 15 ns tPD and 117.6 MHz internal frequency support sub-20 ns serial-to-parallel conversion and back, while the 212 I/O pins handle the wide parallel buses typical of telecom line cards. The JTAG/IEEE 1149.1 boundary-scan interface simplifies in-system test of high-density backplane assemblies. Because MAX 9000 CPLDs have been deployed in telecom infrastructure for 20+ years, the -15N is a known-quantity part for long-life-cycle designs.
מומלץ
Legacy ASIC and Small-FPGA Replacement
The EPM9560RC208-15N is a popular drop-in replacement for obsolete ASICs and small FPGAs in long-life military, aerospace, and industrial programs. Its 208-RQFP package matches many 1990s-era ASIC footprints, allowing board-level redesign without changing the PCB. The non-volatile EEPROM configuration eliminates the boot PROM and configuration supervisor required by SRAM-based FPGAs, reducing BOM count and improving MTBF. Designers can convert legacy ASIC netlists to MAX+PLUS II HDL or schematic capture, then synthesize into the 560 macrocells to extend product life without re-spinning the board.
מומלץ
Power-Up Sequencing and Reset Distribution
The EPM9560RC208-15N is ideal for power-up sequencing and reset distribution in multi-rail systems where multiple voltage domains must come up in a specific order to prevent latch-up. Its 5.0 V core and I/O can directly interface with supervisory reset generators, and its deterministic timing ensures precise rail-to-rail sequencing delays. The 560 macrocells comfortably implement 8-16 sequencing channels with watchdog timers and brown-out detection logic. Because the configuration is non-volatile EEPROM, the sequencing logic is active the instant power is applied - critical for FPGAs and ASICs that need a clean reset before their configuration memory loads.
מומלץ
Military and Aerospace Legacy Avionics
The EPM9560RC208-15N is specified for military temperature ranges and is widely deployed in legacy avionics subsystems, radar signal processing backplanes, and weapons-system controllers. Its 560-macrocell density supports the complex state machines and bus arbiters required in MIL-STD-1553, ARINC 429, and other avionics data buses. The 208-RQFP package is compatible with the through-hole and socketed assembly methods common in military hardware. While the commercial-grade -15N variant (0C to +70C) is the most available, extended-temperature variants exist within the broader MAX 9560 family for harsh-environment applications.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור EPM9560RC208-15N — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | EPM9560RC208-15 | EPM9560RC208-10N | EPM9560ARC208-10N | EPM9560RC208-15C | EPM9560RC208-14 | EPM9560RC208-13 |
|---|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 208-RQFP | 208-RQFP - same | 208-RQFP - same | 208-RQFP - same | 208-RQFP - same | 208-RQFP - same | 208-RQFP - same |
| Macrocells | 560 | 560 | 560 | 560 | 560 | 560 | 560 |
| Pin-to-Pin Delay (tPD) | 15 ns | 15 ns | 10 ns (33% faster) | 10 ns (33% faster) | 15 ns | 14 ns | 13 ns |
| Maximum Internal Frequency | 117.6 MHz | 117.6 MHz | 125 MHz | 125 MHz | 117.6 MHz | 125 MHz | 125 MHz |
| Core Voltage | 5.0 V | 5.0 V | 5.0 V | 5.0 V | 5.0 V | 5.0 V | 5.0 V |
| Configuration Memory | CMOS EEPROM | CMOS EEPROM | CMOS EEPROM | CMOS EEPROM | CMOS EEPROM | CMOS EEPROM | CMOS EEPROM |
| JTAG (IEEE 1149.1) | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Lifecycle Status | Last-Time-Buy | Last-Time-Buy | Last-Time-Buy | Last-Time-Buy | Last-Time-Buy | Last-Time-Buy | Last-Time-Buy |
מבדילים עיקריים
- Standard mainstream speed grade with best availability (לעומתEPM9560RC208-10N)
- Lead-free / RoHS-compliant N-suffix finish (לעומתEPM9560RC208-15)
- 208-pin RQFP footprint compatible across entire MAX 9560 family (לעומתEPM9560RC240-15)
הערות תכנון
The EPM9560RC208-15N draws Icc from a single 5.0 V rail; consult the MAX 9000 datasheet DC characteristics for Icc vs frequency and vs output switching loading. Estimated: with 50% I/O toggling at 50 MHz into 50 pF loads, expect ICC in the 200-400 mA range. Provide at least four 0.1 uF decoupling capacitors placed adjacent to VCC/GND pin pairs around the 208-RQFP perimeter, plus a bulk 10-47 uF tantalum or ceramic capacitor at the supply entry point. Add a bulk reservoir to handle simultaneous-output-switching (SSO) current spikes that can exceed 1 A on densely-switching outputs.
The 208-RQFP package has 0.5 mm pin pitch with gull-wing leads on all four sides - use a 4-layer PCB with continuous ground and power planes to minimize ground bounce and SSO noise. Estimated: keep all signal traces shorter than 50 mm to avoid transmission-line effects above 50 MHz, and use 33 ohm series termination on clock outputs driving more than 25 mm of trace. Provide a solid ground plane directly under the device to reduce EMI; the RQFP package's exposed leads make excellent thermal vias when stitched to inner ground planes.
The MAX 9000 family is in last-time-buy status, so design for long-term obsolescence before committing to a new production design. Common pitfalls include: (1) using MAX+PLUS II instead of Quartus - both are supported but Quartus MAX 9000 device support requires the legacy device library installation; (2) assuming signal-soft or buffered feature compatibility with MAX 7000 - register all I/O configurations explicitly in the project; (3) forgetting the JTAG TCK pull-down and TMS pull-up resistors required for reliable in-system programming; (4) mating a -15N design with an -10N footprint without re-running static timing analysis.
Place JTAG pins TDI, TMS, TCK, and TDO on accessible board test points or a 2x5 pin header for in-system programming via ByteBlasterMV or USB-Blaster. Estimated: route JTAG signals with the same 50 mm trace-length guideline as other high-speed signals to avoid programming failures. Add a JTAG chain-include resistor network if multiple JTAG devices share the bus, and document the JTAG chain order in the design files. For production programming, the IEEE 1149.1 boundary-scan interface also enables in-circuit test (ICT) for bed-of-nails fixtures.
מידע על תאימות
RoHS/REACH/lead-free status depends on the specific part marking and date code. The -N suffix generally indicates lead-free/RoHS-compliant finish for newer manufacturing lots, but always verify against the Certificate of Conformance (CoC) from your franchised distributor. MAX 9000 family is not AEC-Q100 qualified - automotive applications require separate qualification.