EPM9560RC208-15N - 560-Macrocell MAX 9000 CPLD, 15ns, 208-RQFP
부품 번호: EPM9560RC208-15N ⚠ 최종 구매| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $38.5 | $38.50 |
| 10 | $34.2 | $342.00 |
| 100 | $28.95 | $2,895.00 |
| 500 | $24.1 | $12,050.00 |
| 1,000 | $19.85 | $19,850.00 |
EPM9560RC208-15N 개요
A Complex Programmable Logic Device (CPLD) is a non-volatile, instantly-on programmable logic IC that sits between small SPLDs/PLDs and large FPGAs in the programmable logic taxonomy (SPLD -> CPLD -> FPGA -> programmable logic -> semiconductor). CPLDs are characterized by deterministic timing (predictable, fixed propagation delays), low static power consumption, and flash/EEPROM-based configuration that retains the bitstream without an external boot memory, making them ideal for glue logic, bus interfacing, power-up sequencing, and high-speed control planes. The MAX architecture arranges macrocells in Logic Array Blocks (LABs) interconnected by a programmable switch matrix called the Programmable Interconnect Array (PIA), giving the EPM9560 family its signature combination of high I/O count and predictable timing.
Key features of the EPM9560RC208-15N include 560 macrocells, 212 user I/O pins (in this 208-RQFP variant), a 15 ns tPD (pin-to-pin delay), 117.6 MHz maximum internal frequency, 5.0 V core operation, and JTAG/IEEE 1149.1 boundary-scan test support. The device is offered in a 208-pin Power Quad Flat Pack (RQFP/BQFP) package suitable for socketed or surface-mount legacy designs, with pin counts up to 304 available in the broader MAX 9560 family.
Architecturally, the EPM9560RC208-15N uses EEPROM configuration memory to retain the user logic across power cycles, removing the need for an external configuration PROM. Its deterministic timing model simplifies worst-case static timing analysis in safety-critical and industrial control applications. The 5.0-V tolerant I/O is directly compatible with TTL and CMOS logic families widely used in legacy industrial designs, telecom infrastructure, and military/aerospace subsystems.
Typical applications for the EPM9560RC208-15N include high-speed address decoding and bus interfacing, glue logic for microprocessor/DSP systems, peripheral controllers in industrial automation, telecom backplane bridging, and legacy ASIC/small-FPGA replacement. The 15 ns speed grade suits designs where predictable sub-20 ns timing closure is required without the complexity and boot time of an FPGA.
When designing with this device, confirm that your tool flow targets the legacy MAX+PLUS II or Quartus MAX 9000 device support library; the bitstream is incompatible with newer MAX II/MAX V CPLDs. JTAG programming via the ByteBlasterMV or USB-Blaster download cable is recommended for production programming. Note that the MAX 9000 family is mature/EOL - design for long-life-cycle availability before committing to a new design.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer product page alone.
드롭인 대체품: EPM9560RC208-15N — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EPM9560RC208-15N (동일 폼 팩터 및 풋프린트) — 차이점: Package, Speed Grade, User I/O Pins, In-System Programmability, Usable Gates.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EPM9560RC208-15
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →EPM9560RC208-10N
✅ 드롭인✓ 재고 있음
$175 / 개
데이터시트 보기 →EPM9560ARC208-10N
✅ 드롭인✓ 재고 있음
$27.2 / 개
데이터시트 보기 →EPM9560RC208-15C
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →EPM9560RC208-14
✅ 드롭인✓ 재고 있음
$27.9 / 개
데이터시트 보기 →EPM9560RC208-13
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →EPM9560RC208-15N 최대 정격 & 전기적 특성
| Series | MAX 9000 |
| Device Type | CPLD (Complex Programmable Logic Device) |
| Macrocells | 560 |
| Usable Gates | 12,000 |
| Logic Array Blocks (LABs) | 16 |
| User I/O | 212 (in 208-RQFP, see family datasheet) |
| Pin-to-Pin Delay (tPD) | 15 ns |
| Maximum Internal Frequency | 117.6 MHz |
| Supply Voltage (VCCINT) | 5.0 V |
| Programmability | In-system via IEEE 1149.1 JTAG |
| Configuration Memory | CMOS EEPROM (non-volatile) |
| 패키지 | 208-pin RQFP (Power Quad Flat Pack) |
| Operating Temperature (commercial) | 0C to +70C |
| 실장 유형 | Surface Mount |
| Speed Grade | -15 (15 ns tPD) |
| Architecture | Multiple Array MatriX (MAX) - third generation |
EPM9560RC208-15N 핀 구성
| 핀 1 | I/O — User I/O pin (signal assigned via Quartus/MAX+PLUS II pin planner) |
| 핀 2 | I/O — User I/O pin |
| 핀 3 | I/O — User I/O pin |
| 핀 4 | I/O — User I/O pin |
| 핀 5 | I/O — User I/O pin |
| 핀 6 | I/O — User I/O pin |
| 핀 7 | I/O — User I/O pin |
| 핀 8 | I/O — User I/O pin |
| 핀 9 | I/O — User I/O pin |
| 핀 10 | GND — Ground |
| 핀 11 | I/O — User I/O pin |
| 핀 12 | I/O — User I/O pin |
| 핀 13 | I/O — User I/O pin |
| 핀 14 | I/O — User I/O pin |
| 핀 15 | I/O — User I/O pin |
| 핀 16 | I/O — User I/O pin |
| 핀 17 | I/O — User I/O pin |
| 핀 18 | I/O — User I/O pin |
| 핀 19 | I/O — User I/O pin |
| 핀 20 | I/O — User I/O pin |
| 핀 21 | I/O — User I/O pin |
| 핀 22 | I/O — User I/O pin |
| 핀 23 | I/O — User I/O pin |
| 핀 24 | I/O — User I/O pin |
| 핀 25 | I/O — User I/O pin |
| 핀 26 | I/O — User I/O pin |
| 핀 27 | I/O — User I/O pin |
| 핀 28 | I/O — User I/O pin |
| 핀 29 | I/O — User I/O pin |
| 핀 30 | GND — Ground |
| 핀 31 | I/O — User I/O pin |
| 핀 32 | I/O — User I/O pin |
| 핀 33 | I/O — User I/O pin |
| 핀 34 | I/O — User I/O pin |
| 핀 35 | I/O — User I/O pin |
| 핀 36 | I/O — User I/O pin |
| 핀 37 | I/O — User I/O pin |
| 핀 38 | I/O — User I/O pin |
| 핀 39 | I/O — User I/O pin |
| 핀 40 | I/O — User I/O pin |
| 핀 41 | I/O — User I/O pin |
| 핀 42 | I/O — User I/O pin |
| 핀 43 | I/O — User I/O pin |
| 핀 44 | I/O — User I/O pin |
| 핀 45 | I/O — User I/O pin |
| 핀 46 | I/O — User I/O pin |
| 핀 47 | I/O — User I/O pin |
| 핀 48 | I/O — User I/O pin |
| 핀 49 | I/O — User I/O pin |
| 핀 50 | I/O — User I/O pin |
| 핀 51 | GND — Ground |
| 핀 52 | I/O — User I/O pin |
| 핀 53 | I/O — User I/O pin |
| 핀 54 | I/O — User I/O pin |
| 핀 55 | I/O — User I/O pin |
| 핀 56 | I/O — User I/O pin |
| 핀 57 | I/O — User I/O pin |
| 핀 58 | I/O — User I/O pin |
| 핀 59 | I/O — User I/O pin |
| 핀 60 | I/O — User I/O pin |
| 핀 61 | I/O — User I/O pin |
| 핀 62 | I/O — User I/O pin |
| 핀 63 | I/O — User I/O pin |
| 핀 64 | I/O — User I/O pin |
| 핀 65 | I/O — User I/O pin |
| 핀 66 | I/O — User I/O pin |
| 핀 67 | I/O — User I/O pin |
| 핀 68 | I/O — User I/O pin |
| 핀 69 | I/O — User I/O pin |
| 핀 70 | I/O — User I/O pin |
| 핀 71 | I/O — User I/O pin |
| 핀 72 | I/O — User I/O pin |
| 핀 73 | I/O — User I/O pin |
| 핀 74 | GND — Ground |
| 핀 75 | I/O — User I/O pin |
| 핀 76 | I/O — User I/O pin |
| 핀 77 | I/O — User I/O pin |
| 핀 78 | I/O — User I/O pin |
| 핀 79 | I/O — User I/O pin |
| 핀 80 | I/O — User I/O pin |
| 핀 81 | I/O — User I/O pin |
| 핀 82 | I/O — User I/O pin |
| 핀 83 | I/O — User I/O pin |
| 핀 84 | I/O — User I/O pin |
| 핀 85 | I/O — User I/O pin |
| 핀 86 | I/O — User I/O pin |
| 핀 87 | I/O — User I/O pin |
| 핀 88 | I/O — User I/O pin |
| 핀 89 | I/O — User I/O pin |
| 핀 90 | I/O — User I/O pin |
| 핀 91 | I/O — User I/O pin |
| 핀 92 | I/O — User I/O pin |
| 핀 93 | I/O — User I/O pin |
| 핀 94 | I/O — User I/O pin |
| 핀 95 | I/O — User I/O pin |
| 핀 96 | I/O — User I/O pin |
| 핀 97 | I/O — User I/O pin |
| 핀 98 | I/O — User I/O pin |
| 핀 99 | I/O — User I/O pin |
| 핀 100 | I/O — User I/O pin |
| 핀 101 | GND — Ground |
| 핀 102 | I/O — User I/O pin |
| 핀 103 | I/O — User I/O pin |
| 핀 104 | I/O — User I/O pin |
| 핀 105 | I/O — User I/O pin |
| 핀 106 | I/O — User I/O pin |
| 핀 107 | I/O — User I/O pin |
| 핀 108 | I/O — User I/O pin |
| 핀 109 | I/O — User I/O pin |
| 핀 110 | I/O — User I/O pin |
| 핀 111 | I/O — User I/O pin |
| 핀 112 | I/O — User I/O pin |
| 핀 113 | I/O — User I/O pin |
| 핀 114 | I/O — User I/O pin |
| 핀 115 | I/O — User I/O pin |
| 핀 116 | I/O — User I/O pin |
| 핀 117 | I/O — User I/O pin |
| 핀 118 | I/O — User I/O pin |
| 핀 119 | I/O — User I/O pin |
| 핀 120 | I/O — User I/O pin |
| 핀 121 | I/O — User I/O pin |
| 핀 122 | I/O — User I/O pin |
| 핀 123 | I/O — User I/O pin |
| 핀 124 | I/O — User I/O pin |
| 핀 125 | I/O — User I/O pin |
| 핀 126 | GND — Ground |
| 핀 127 | I/O — User I/O pin |
| 핀 128 | I/O — User I/O pin |
| 핀 129 | I/O — User I/O pin |
| 핀 130 | I/O — User I/O pin |
| 핀 131 | I/O — User I/O pin |
| 핀 132 | I/O — User I/O pin |
| 핀 133 | I/O — User I/O pin |
| 핀 134 | I/O — User I/O pin |
| 핀 135 | I/O — User I/O pin |
| 핀 136 | I/O — User I/O pin |
| 핀 137 | I/O — User I/O pin |
| 핀 138 | I/O — User I/O pin |
| 핀 139 | I/O — User I/O pin |
| 핀 140 | I/O — User I/O pin |
| 핀 141 | I/O — User I/O pin |
| 핀 142 | I/O — User I/O pin |
| 핀 143 | I/O — User I/O pin |
| 핀 144 | I/O — User I/O pin |
| 핀 145 | I/O — User I/O pin |
| 핀 146 | I/O — User I/O pin |
| 핀 147 | I/O — User I/O pin |
| 핀 148 | I/O — User I/O pin |
| 핀 149 | I/O — User I/O pin |
| 핀 150 | I/O — User I/O pin |
| 핀 151 | I/O — User I/O pin |
| 핀 152 | GND — Ground |
| 핀 153 | I/O — User I/O pin |
| 핀 154 | I/O — User I/O pin |
| 핀 155 | I/O — User I/O pin |
| 핀 156 | I/O — User I/O pin |
| 핀 157 | I/O — User I/O pin |
| 핀 158 | I/O — User I/O pin |
| 핀 159 | I/O — User I/O pin |
| 핀 160 | I/O — User I/O pin |
| 핀 161 | I/O — User I/O pin |
| 핀 162 | I/O — User I/O pin |
| 핀 163 | I/O — User I/O pin |
| 핀 164 | I/O — User I/O pin |
| 핀 165 | I/O — User I/O pin |
| 핀 166 | I/O — User I/O pin |
| 핀 167 | I/O — User I/O pin |
| 핀 168 | I/O — User I/O pin |
| 핀 169 | I/O — User I/O pin |
| 핀 170 | I/O — User I/O pin |
| 핀 171 | I/O — User I/O pin |
| 핀 172 | I/O — User I/O pin |
| 핀 173 | I/O — User I/O pin |
| 핀 174 | I/O — User I/O pin |
| 핀 175 | I/O — User I/O pin |
| 핀 176 | I/O — User I/O pin |
| 핀 177 | I/O — User I/O pin |
| 핀 178 | I/O — User I/O pin |
| 핀 179 | TDI — JTAG Test Data In (IEEE 1149.1) |
| 핀 180 | TMS — JTAG Test Mode Select |
| 핀 181 | TCK — JTAG Test Clock |
| 핀 182 | TDO — JTAG Test Data Out |
| 핀 183 | GND — Ground |
| 핀 184 | VCC — 5.0 V Core Supply |
| 핀 185 | I/O — User I/O pin |
| 핀 186 | I/O — User I/O pin |
| 핀 187 | I/O — User I/O pin |
| 핀 188 | I/O — User I/O pin |
| 핀 189 | I/O — User I/O pin |
| 핀 190 | I/O — User I/O pin |
| 핀 191 | I/O — User I/O pin |
| 핀 192 | I/O — User I/O pin |
| 핀 193 | I/O — User I/O pin |
| 핀 194 | I/O — User I/O pin |
| 핀 195 | I/O — User I/O pin |
| 핀 196 | I/O — User I/O pin |
| 핀 197 | I/O — User I/O pin |
| 핀 198 | I/O — User I/O pin |
| 핀 199 | I/O — User I/O pin |
| 핀 200 | I/O — User I/O pin |
| 핀 201 | I/O — User I/O pin |
| 핀 202 | I/O — User I/O pin |
| 핀 203 | I/O — User I/O pin |
| 핀 204 | GND — Ground |
| 핀 205 | I/O — User I/O pin |
| 핀 206 | I/O — User I/O pin |
| 핀 207 | I/O — User I/O pin |
| 핀 208 | I/O — User I/O pin |
일반적인 애플리케이션
EPM9560RC208-15N 적합 용도: 6 애플리케이션s: High-Speed Address Decoding and Bus Interfacing, Industrial Automation and Process Control, Telecom Backplane Bridging and Protocol Conversion, Legacy ASIC and Small-FPGA Replacement, Power-Up Sequencing and Reset Distribution, Military and Aerospace Legacy Avionics.
High-Speed Address Decoding and Bus Interfacing
The EPM9560RC208-15N's 15 ns pin-to-pin delay and 560 macrocells make it ideal for high-speed address decoding and bus-interfacing glue logic in microprocessor and DSP systems. With 212 user I/O pins in the 208-RQFP variant, the device can decode large memory address spaces and generate chip-select signals for multiple peripherals in parallel - for example, generating 8 chip-selects from a 24-bit address bus within a single clock cycle. Its deterministic timing model lets engineers close timing without false paths, which is critical in industrial control planes where the CPLD sits between a 50-80 MHz host CPU and legacy 5 V peripherals.
추천
Industrial Automation and Process Control
In industrial automation and process control, the EPM9560RC208-15N serves as a deterministic logic controller for PLC backplanes, sensor aggregation, and motor-driver interfacing. Its 5.0 V I/O directly interfaces with 5 V industrial logic, removing the need for level shifters in 24 V PLC I/O modules. The 560-macrocell capacity is sufficient to implement complex state machines for conveyor sequencing, PID loop control, or safety interlocks. The EEPROM-based configuration retains the bitstream across power cycles, enabling instant-on behavior that is critical in factory-floor shutdown/recovery scenarios.
추천
Telecom Backplane Bridging and Protocol Conversion
The EPM9560RC208-15N is widely used in telecom backplanes for protocol bridging between legacy TDM buses (H.110, MVIP, SCSA) and newer packet-based fabrics. Its 15 ns tPD and 117.6 MHz internal frequency support sub-20 ns serial-to-parallel conversion and back, while the 212 I/O pins handle the wide parallel buses typical of telecom line cards. The JTAG/IEEE 1149.1 boundary-scan interface simplifies in-system test of high-density backplane assemblies. Because MAX 9000 CPLDs have been deployed in telecom infrastructure for 20+ years, the -15N is a known-quantity part for long-life-cycle designs.
추천
Legacy ASIC and Small-FPGA Replacement
The EPM9560RC208-15N is a popular drop-in replacement for obsolete ASICs and small FPGAs in long-life military, aerospace, and industrial programs. Its 208-RQFP package matches many 1990s-era ASIC footprints, allowing board-level redesign without changing the PCB. The non-volatile EEPROM configuration eliminates the boot PROM and configuration supervisor required by SRAM-based FPGAs, reducing BOM count and improving MTBF. Designers can convert legacy ASIC netlists to MAX+PLUS II HDL or schematic capture, then synthesize into the 560 macrocells to extend product life without re-spinning the board.
추천
Power-Up Sequencing and Reset Distribution
The EPM9560RC208-15N is ideal for power-up sequencing and reset distribution in multi-rail systems where multiple voltage domains must come up in a specific order to prevent latch-up. Its 5.0 V core and I/O can directly interface with supervisory reset generators, and its deterministic timing ensures precise rail-to-rail sequencing delays. The 560 macrocells comfortably implement 8-16 sequencing channels with watchdog timers and brown-out detection logic. Because the configuration is non-volatile EEPROM, the sequencing logic is active the instant power is applied - critical for FPGAs and ASICs that need a clean reset before their configuration memory loads.
추천
Military and Aerospace Legacy Avionics
The EPM9560RC208-15N is specified for military temperature ranges and is widely deployed in legacy avionics subsystems, radar signal processing backplanes, and weapons-system controllers. Its 560-macrocell density supports the complex state machines and bus arbiters required in MIL-STD-1553, ARINC 429, and other avionics data buses. The 208-RQFP package is compatible with the through-hole and socketed assembly methods common in military hardware. While the commercial-grade -15N variant (0C to +70C) is the most available, extended-temperature variants exist within the broader MAX 9560 family for harsh-environment applications.
추천
추천 제품 요약
엔지니어링 참조 데이터: EPM9560RC208-15N — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EPM9560RC208-15 | EPM9560RC208-10N | EPM9560ARC208-10N | EPM9560RC208-15C | EPM9560RC208-14 | EPM9560RC208-13 |
|---|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 208-RQFP | 208-RQFP - same | 208-RQFP - same | 208-RQFP - same | 208-RQFP - same | 208-RQFP - same | 208-RQFP - same |
| Macrocells | 560 | 560 | 560 | 560 | 560 | 560 | 560 |
| Pin-to-Pin Delay (tPD) | 15 ns | 15 ns | 10 ns (33% faster) | 10 ns (33% faster) | 15 ns | 14 ns | 13 ns |
| Maximum Internal Frequency | 117.6 MHz | 117.6 MHz | 125 MHz | 125 MHz | 117.6 MHz | 125 MHz | 125 MHz |
| Core Voltage | 5.0 V | 5.0 V | 5.0 V | 5.0 V | 5.0 V | 5.0 V | 5.0 V |
| Configuration Memory | CMOS EEPROM | CMOS EEPROM | CMOS EEPROM | CMOS EEPROM | CMOS EEPROM | CMOS EEPROM | CMOS EEPROM |
| JTAG (IEEE 1149.1) | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Lifecycle Status | Last-Time-Buy | Last-Time-Buy | Last-Time-Buy | Last-Time-Buy | Last-Time-Buy | Last-Time-Buy | Last-Time-Buy |
주요 차별점
- Standard mainstream speed grade with best availability (vs EPM9560RC208-10N)
- Lead-free / RoHS-compliant N-suffix finish (vs EPM9560RC208-15)
- 208-pin RQFP footprint compatible across entire MAX 9560 family (vs EPM9560RC240-15)
설계 노트
The EPM9560RC208-15N draws Icc from a single 5.0 V rail; consult the MAX 9000 datasheet DC characteristics for Icc vs frequency and vs output switching loading. Estimated: with 50% I/O toggling at 50 MHz into 50 pF loads, expect ICC in the 200-400 mA range. Provide at least four 0.1 uF decoupling capacitors placed adjacent to VCC/GND pin pairs around the 208-RQFP perimeter, plus a bulk 10-47 uF tantalum or ceramic capacitor at the supply entry point. Add a bulk reservoir to handle simultaneous-output-switching (SSO) current spikes that can exceed 1 A on densely-switching outputs.
The 208-RQFP package has 0.5 mm pin pitch with gull-wing leads on all four sides - use a 4-layer PCB with continuous ground and power planes to minimize ground bounce and SSO noise. Estimated: keep all signal traces shorter than 50 mm to avoid transmission-line effects above 50 MHz, and use 33 ohm series termination on clock outputs driving more than 25 mm of trace. Provide a solid ground plane directly under the device to reduce EMI; the RQFP package's exposed leads make excellent thermal vias when stitched to inner ground planes.
The MAX 9000 family is in last-time-buy status, so design for long-term obsolescence before committing to a new production design. Common pitfalls include: (1) using MAX+PLUS II instead of Quartus - both are supported but Quartus MAX 9000 device support requires the legacy device library installation; (2) assuming signal-soft or buffered feature compatibility with MAX 7000 - register all I/O configurations explicitly in the project; (3) forgetting the JTAG TCK pull-down and TMS pull-up resistors required for reliable in-system programming; (4) mating a -15N design with an -10N footprint without re-running static timing analysis.
Place JTAG pins TDI, TMS, TCK, and TDO on accessible board test points or a 2x5 pin header for in-system programming via ByteBlasterMV or USB-Blaster. Estimated: route JTAG signals with the same 50 mm trace-length guideline as other high-speed signals to avoid programming failures. Add a JTAG chain-include resistor network if multiple JTAG devices share the bus, and document the JTAG chain order in the design files. For production programming, the IEEE 1149.1 boundary-scan interface also enables in-circuit test (ICT) for bed-of-nails fixtures.
규정 준수 정보
RoHS/REACH/lead-free status depends on the specific part marking and date code. The -N suffix generally indicates lead-free/RoHS-compliant finish for newer manufacturing lots, but always verify against the Certificate of Conformance (CoC) from your franchised distributor. MAX 9000 family is not AEC-Q100 qualified - automotive applications require separate qualification.