Texas Instruments

LM393ADGKR - Dual 36V Comparator | Texas Instruments

MPN: LM393ADGKR ✓ פעיל
2 V to 36 V Vdss 250 nA Id 8-pin VSSOP Package
כמות הזמנה מינימלית: 1 |

LM393ADGKR סקירה

The Texas Instruments LM393ADGKR is a dual differential comparator with two independent channels, a 2 V to 36 V supply range, a 1.3 us response time, and open-collector outputs in an 8-pin VSSOP package. It compares two input voltages and provides a logic-level indication of which input is higher, making it suitable for threshold detection, supervision, and general-purpose signal conditioning.

A differential comparator is an analog integrated circuit that evaluates the voltage difference between its inverting and non-inverting inputs. The LM393ADGKR belongs to the comparator and amplifier IC hierarchy within broader semiconductor and signal-conditioning applications. Its two channels operate independently, while a common supply and ground establish the operating reference for both comparators.

Key characteristics include a 2 mV input offset voltage, 250 nA input bias current, a 1.3 us response time, and an open-collector output configuration. The common-mode input range includes ground, supporting interfaces where one signal approaches the lower supply rail. Open-collector outputs can sink useful current and require an external pull-up resistor, enabling wired logic, level translation, and flexible output rise-time control.

The LM393ADGKR accepts single-supply operation across a broad voltage range, while dual-supply applications can use the available ±18 V operating range identified for this device. Because the output stage is open collector, the output voltage is set by the pull-up network rather than actively driven high. This architecture is efficient for alarm, relay-control, and interface circuits, but it also means the output cannot source current without suitable external circuitry.

Typical applications include industrial threshold detection, battery and power-supply monitoring, sensor conditioning, window comparison, and open-drain logic interfacing. The dual-channel configuration reduces component count when two independent comparisons are needed. It is also appropriate for systems that intentionally require a pull-up-defined high level, such as wired interconnects, indicator drivers, and level-shifting arrangements.

The principal design consideration is the open-collector output. Select a pull-up resistor that provides adequate sink current while keeping rise time within the system timing budget. Also verify input common-mode limits, supply sequencing, output leakage, and thermal conditions for the exact operating environment before finalizing the circuit.

This page consolidates electrical characteristics, verified lifecycle and compliance information, pin-compatible replacement options, and practical design guidance for engineers evaluating the LM393ADGKR in industrial, monitoring, and general-purpose comparator circuits.

חלופות תחליף ישיר עבור LM393ADGKR — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם LM393ADGKR (אותו גורם צורה וטביעת רגל) — שונים ב Comparator Type, Number of Channels, Output Type, Package.

Texas Instruments
Comparator Type: Dual differential general-purpose comparator
Package: 8-VSSOP
השווה עם LM393ADGKR →
Texas Instruments
Comparator Type: Dual differential voltage comparator
Number of Channels: 2 independent channels
Output Type: Open collector
השווה עם LM393ADGKR →

LM393BIDGKR

✅ Drop-In
Texas Instruments
📦 VSSOP-8 (DGK)
Dual differential comparator · 2 channels · Open-collector · 38 V · 200 uA · 0.37 mV · 3.5 nA · 1 us

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

LM293ADGKR

✅ Drop-In
📦 VSSOP-8 (DGK)
Same 8-pin VSSOP comparator-family package; the required temperature grade differs, so the exact operating range must be verified before use.

📋 חלופה להתייחסות (לא בקטלוג)

LM393DGKR

✅ Drop-In
Texas Instruments
📦 VSSOP-8 (DGK)
Dual differential voltage comparator · 2 independent channels · 2 V to 36 V · 2 V to 36 V · VCC at least 1.5 V more positive than input common-mode voltage · Open collector · Differential inputs on each channel · 8-VSSOP

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

LM393ADGKR דירוגים מרביים ומאפיינים חשמליים

Comparator Type Dual differential comparator
Number of Channels 2 channels
סוג פלט Open-collector
Supply Voltage Range 2 V to 36 V
Dual Supply Voltage Range ±1 V to ±18 V
Response Time 1.3 us
Input Offset Voltage 2 mV
Input Bias Current 250 nA
Common-Mode Input Range Includes ground
Input Type Rail-to-Rail
מארז 8-pin VSSOP
סוג הרכבה Surface mount
Device Grade Industrial grade
סטטוס מחזור חיים Active
RoHS Compliance Compliant
REACH Compliance Unknown
AEC-Q100 Qualification Not qualified

מדריך תצורת פינים של LM393ADGKR 8-pin vssop

תצורת פינים עבור LM393ADGKR (מארזת 8-pin vssop). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 8-pin vssop עבור LM393ADGKR

אין נתוני פריסת פינים מפורטים עבור LM393ADGKR.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

LM393ADGKR מתאים עבור 6 יישוםs: Industrial Threshold Detection, Power-Supply Monitoring, Battery Voltage Supervision, Sensor Signal Conditioning, Window Comparison, Open-Drain Interface Circuit.

🏭

Industrial Threshold Detection

The LM393ADGKR fits industrial threshold detection because its two independent channels compare input voltages with a 2 mV input offset and 1.3 us response time. Place one signal on each comparator input and use the open-collector output to drive an alarm, relay, or digital input. The common-mode range includes ground, which is useful when monitoring low-level process or sensor signals. A pull-up resistor establishes the inactive logic level and should be selected from the required sink current and maximum transition-time constraints.

⚡

Power-Supply Monitoring

The LM393ADGKR can monitor a power rail by comparing its voltage against a reference-derived threshold. Its 2 V to 36 V single-supply capability covers a broad range of industrial and embedded supply levels, while the open-collector output can directly alert a system controller. The two channels permit monitoring of a supply and its associated signal simultaneously. Account for input offset tolerance, reference accuracy, and the pull-up voltage when setting the system trip point.

🔋

Battery Voltage Supervision

The LM393ADGKR is appropriate for battery supervision when an early warning or undervoltage event must trigger a discrete control action. Its low 250 nA input bias current helps reduce measurement disturbance, and the 1.3 us response time allows rapid transition during threshold crossing. The open-collector output can pull a supervisor line low or drive an indicator through a pull-up. Select the external reference and resistor divider carefully so battery chemistry, tolerance, and temperature do not create false trips.

🧩

Sensor Signal Conditioning

The LM393ADGKR converts an analog sensor level into a logic decision when used as a threshold comparator. The differential inputs allow a sensor signal to be compared with a reference, and the 2 mV offset is useful when the decision boundary is close to the measured level. The common-mode range includes ground, supporting sensors whose output approaches the lower rail. For slow sensor signals, account for noise around the threshold and add filtering before the comparator when excessive output toggling is observed.

📺

Window Comparison

The LM393ADGKR supports window comparison by assigning its two independent channels to the lower and upper limits of an acceptable signal range. The two 1.3 us channels allow both boundaries to be evaluated, while their open-collector outputs can be combined through suitable pull-ups and logic. This arrangement is useful for validating supply levels, signal ranges, or sensor limits. Review output-state conventions carefully when combining the channels, and confirm that the common-mode range covers both threshold voltages.

🌐

Open-Drain Interface Circuit

The LM393ADGKR's open-collector outputs make it useful for wired open-drain interfaces, status buses, and level translation. Each output can pull a logic node toward ground while an external pull-up connects that node to the desired supply voltage. With a 1.3 us response time, the device suits general-purpose control and alarm signals rather than very high-speed data channels. Select the pull-up voltage for the receiving device, check output leakage during the high state, and include the receiver input current in the resistor calculation.

What is the operating voltage of LM393ADGKR?
The LM393ADGKR operates from 2 V to 36 V as a single-supply comparator and supports a dual-supply range of ±1 V to ±18 V. According to the Texas Instruments LM393A product documentation, the device is designed for wide-range supply operation with two independent comparator channels. Check the input and output limits of the specific signal source when operating near either supply boundary.
Where can I download the LM393ADGKR datasheet PDF?
The LM393ADGKR datasheet and ordering information are available from the official Texas Instruments LM393A product page and part-details page. The manufacturer documentation identifies the device as an industrial-grade, dual differential comparator with open-collector outputs. Use the pin-description table and recommended operating conditions in the manufacturer datasheet when assigning PCB nets and validating the design.
What are the key specifications of LM393ADGKR that engineers should know?
The LM393ADGKR provides two independent differential comparator channels, a 2 V to 36 V supply range, a 1.3 us response time, 2 mV input offset voltage, and 250 nA input bias current. The Texas Instruments documentation also identifies open-collector outputs and a VSSOP-8 package. These characteristics make the device suitable for general threshold detection and power-monitoring circuits.
Does LM393ADGKR have open-collector outputs?
Yes, both LM393ADGKR comparator channels use open-collector outputs. Texas Instruments identifies the device as a dual differential comparator with open-collector outputs, allowing each output to sink current and connect to an external pull-up resistor. This architecture supports wired logic and level translation, but every output node requires an appropriate pull-up arrangement.
What can replace the LM393ADGKR?
The LM393BIDGKR is the closest identified pin-compatible replacement in the same Texas Instruments VSSOP-8 family, with improved offset voltage, response time, and maximum operating voltage. The LM293ADGKR and LM393DGKR are additional family-related candidates for review. Confirm pin assignments, temperature grade, supply limits, and output characteristics in the manufacturer datasheet before approving a substitution.
Is LM393ADGKR suitable for industrial threshold detection?
The LM393ADGKR is suitable for industrial threshold detection because Texas Instruments classifies it as an industrial-grade dual differential comparator. Its 2 V to 36 V supply range, 1.3 us response time, and open-collector outputs support sensor-limit, power-monitor, and alarm circuits. Final qualification still depends on ambient temperature, transient conditions, and the chosen pull-up network.
What is the difference between LM393ADGKR and LM393BIDGKR?
The LM393BIDGKR is the B-version family member and offers improved specifications compared with the LM393ADGKR. The family documentation identifies offset voltage as low as 0.37 mV, supply current as low as 200 uA per comparator, response time as fast as 1 us, and a maximum rating up to 38 V. Both are available in the VSSOP-8 comparison set.
When should I choose LM393ADGKR over LM393BIDGKR?
Choose the LM393ADGKR when an established LM393A configuration and its 2 V to 36 V operating range are sufficient. Choose the LM393BIDGKR when lower offset voltage, lower supply current, faster response, or the B-version 38 V maximum rating creates useful design margin. Both maintain the same 8-pin VSSOP package and comparator-family implementation.
Can LM293ADGKR replace LM393ADGKR?
The LM293ADGKR is a family-related 8-pin VSSOP candidate, but replacement approval depends on the required temperature grade and exact electrical limits. The LM293 and LM393 families share established comparator functionality, while the LM393B documentation identifies newer devices as drop-in replacements for LM293, LM393, and LM2903 families. Verify the specific LM293ADGKR operating range and pinout before substitution.
How do I calculate the open-collector pull-up resistor for LM393ADGKR?
Choose the pull-up resistance by balancing output rise time, sink-current capability, and supply current. A lower resistance produces a faster rising edge and stronger high level but increases current when the output is low; a higher resistance reduces loading but slows the transition. Use the datasheet output leakage and sink-current limits, and add the input current drawn by every attached node to the calculation.
Where can I buy LM393ADGKR and check current availability?
Use the Request a Quote form on this page to ask for LM393ADGKR availability, order quantity, and lead time. The form is the appropriate commercial channel for a current quotation because stock and lead time can change without notice. Provide the exact LM393ADGKR suffix, required reel quantity, and destination when submitting the request.
What is the price of LM393ADGKR?
The current LM393ADGKR price should be requested through the Request a Quote form on this page. Quote requests can reflect order quantity, packaging, shipment destination, and current component availability. Use the exact orderable MPN LM393ADGKR and state any required production or traceability requirements with the inquiry.
What is the lead time for LM393ADGKR?
Submit an LM393ADGRF request through the Request a Quote form on this page to obtain the current lead time and available order quantity. Lead time depends on current inventory and the requested reel quantity, so it should be confirmed for each production order. The form can also capture scheduled delivery and assembly requirements.
Is LM393ADGKR in stock?
Current LM393ADGKR stock should be confirmed through the Request a Quote form on this page. Inventory can vary by reel quantity and purchasing schedule, making a static availability statement unreliable. Include your required quantity, target date, and shipment destination when requesting a quotation and stock confirmation.
What is the best STMicroelectronics equivalent for LM393ADGKR?
No STMicroelectronics equivalent is listed here as a verified drop-in replacement because the available cross-reference information does not establish both an exact VSSOP-8 package and pin-compatible operation. The LM393 family broadly includes compatible CMOS alternatives, but package and pin verification is essential. Use the LM393ADGKR pin functions and the manufacturer datasheet as the acceptance criteria for any cross-brand review.

נתוני עזר הנדסיים עבור LM393ADGKR — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the LM393ADGKR for established industrial comparator designs that need two independent channels, open-collector outputs, a 2 V to 36 V supply range, and an 8-pin VSSOP footprint. It is well suited to threshold detection, supply supervision, open-drain signaling, and sensor interfaces. Choose the LM393BIDGKR when its lower 0.37 mV offset, lower input bias current, 1 us response time, or 38 V maximum rating provides useful margin. Consider the LM293ADGKR only after confirming that its temperature grade meets the deployment environment and that all electrical limits satisfy the design. The LM393DGKR is another family option in the same VSSOP package, but its grade-specific characteristics should be checked directly. For any replacement, verify pin functions, common-mode range, output pull-up requirements, and temperature limits rather than relying on package similarity alone.

השוואה עם חלופות

פרמטר מוצר זה LM393BIDGKR LM293ADGKR LM393DGKR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package VSSOP-8 (DGK) VSSOP-8 (DGK) VSSOP-8 (DGK) VSSOP-8 (DGK)
Comparator Channels 2 channels 2 channels 2 channels 2 channels
Output Type Open-collector Open-collector Open-collector Open-collector
Automotive Qualification Not qualified Not qualified Not qualified Not qualified

מבדילים עיקריים

  • Lower offset and bias currents in the B-version upgrade (לעומתLM393BIDGKR)
  • Faster family-member response time (לעומתLM393BIDGKR)
  • Higher maximum operating-voltage rating (לעומתLM393BIDGKR)

הערות תכנון

Do not treat the open-collector output as a push-pull logic output. Every output node needs an external pull-up resistor unless another open-drain device or pull-up network already provides one. Select the resistor so that the low-state sink current remains within the device rating while the high-state rise time meets the circuit timing requirement. Include every receiver input current and output leakage path in the high-level calculation.

Keep the common-mode input voltages inside the specified operating range, which includes ground but does not imply unlimited rail-to-rail input capability. This matters near the upper supply rail and when the comparator is used with ±18 V dual supplies. The 2 mV input offset also contributes directly to the switching threshold, so resistor and reference tolerances should be included when defining a precision trip point.

Route the two comparator channels with attention to nearby switching nodes because differential input traces can pick up coupled noise. Keep the input and pull-up connections short, place the pull-up resistor close to the output node, and maintain separation from high-current or high-voltage switching paths. For sensitive threshold measurements, ground the input-referenced circuitry carefully and evaluate filtering without adding excessive delay to the 1.3 us response target.

The comparator is normally used in a low-power signal-conditioning role, but actual dissipation and junction temperature depend on the exact device limits, supply voltage, output duty cycle, and ambient environment. Verify these conditions against the manufacturer operating and absolute-maximum ratings. Because the VSSOP package has limited heat-spreading area, avoid placing the device next to a high-dissipation regulator without reviewing the PCB thermal path.

מידע על תאימות

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Qualified
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

RoHS compliance is identified in the component listing. REACH, lead-free status, halogen-free status, and conflict-minerals status are not confirmed by the manufacturer documentation used for this page. The LM393A is identified as an industrial-grade device.

הנתונים אומתו בתאריך: 2026-11-17 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

LM393ADGKR datasheet LM393ADGKR pinout LM393ADGKR datasheet pdf LM393ADGKR equivalent LM393ADGKR replacement LM393ADGKR cross reference LM393ADGKR vs LM393BIDGKR LM393ADGKR open collector LM393ADGKR VSSOP-8 LM393ADGKR voltage monitoring LM393ADGKR price LM393ADGKR stock Texas Instruments LM393ADGKR LM393ADGKR pull-up resistor

רכיבים ומונחים קשורים

Texas Instruments LM393ADGKR LM393BIDGKR LM293ADGKR LM393DGKR dual differential comparator comparator analog integrated circuit amplifier IC semiconductor open-collector output differential input input offset voltage input bias current common-mode input range response time threshold detection power-supply monitoring sensor signal conditioning open-drain interface VSSOP-8 DGK package surface mount RoHS industrial-grade comparator
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר