Analog Devices

MAX232EEWE+T - 120kbps RS-232 Transceiver | Analog Devices

MPN: MAX232EEWE+T ✓ פעיל
5 V Vdss 16-pin wide SOIC, 7.50 mm width Package
כמות הזמנה מינימלית: 1 |

MAX232EEWE+T סקירה

The Analog Devices MAX232EEWE+T is a dual-driver, dual-receiver RS-232 transceiver operating from a single 5V supply, with data rates up to 120kbps and ±15kV HBM ESD protection. The device is housed in a 16-pin wide SOIC package and is supplied in tape-and-reel packaging. Its integrated charge-pump circuitry produces the bipolar voltage levels required by RS-232 interfaces from one 5V supply, reducing the external component count compared with discrete driver designs.

An RS-232 transceiver is a bidirectional interface IC that converts between single-ended logic-level signals and the bipolar signaling used by RS-232 equipment. Within the interface hierarchy, the MAX232E belongs to the RS-232 transceiver family, which is part of transceiver ICs, interface ICs, and broader semiconductor components. Two driver channels convert outgoing logic signals, while two receiver channels convert incoming RS-232 signals into CMOS-compatible levels. This makes the device suitable for equipment with two serial ports or for a single port requiring bidirectional communication.

The MAX232E family provides two transmitters and two receivers, supports operation at up to 120kbps, and meets EIA/TIA-232E and CCITT V.28 interface specifications according to the Analog Devices product page. Its integrated charge-pump circuitry permits single-supply operation, while ±15kV human-body-model ESD protection helps improve robustness at connector-facing pins. The wide 16-SOIC package is also available in common industrial assembly and inspection workflows.

Each channel uses the electrical behavior expected of a standard MAX232-family RS-232 interface. The charge pump develops the positive and negative voltages needed by the drivers, allowing the receiver side to recognize valid RS-232 levels while rejecting signals outside the specified transition region. Four active channels in one package reduce board area compared with separate single-channel transceiver packages. The device therefore balances functional integration, standard interface compatibility, and a widely supported package format.

Typical uses include industrial serial adapters, instrumentation links, point-of-sale equipment, data-acquisition systems, and control panels that connect a TTL or CMOS controller to an RS-232 port. It can also support legacy equipment migrations where the host interface still uses RS-232 and the new controller requires logic-level serial signaling. The 120kbps maximum data rate accommodates many legacy peripheral and instrumentation protocols without requiring a higher-bandwidth physical-layer transceiver.

Designers should preserve the charge-pump capacitor arrangement and place the required capacitors close to the appropriate device pins. RS-232 cable transients and ESD events occur at the connector, so the ground reference, cable routing, and interface protection arrangement also matter. Confirm the logic polarity, receiver threshold behavior, and shutdown state before substituting this device into a design with mixed RS-232 families.

This product page combines the manufacturer interface specifications, package details, verified cross-reference context, selection guidance, and practical application notes to support a faster engineering decision. It also highlights where same-package alternatives can be evaluated without changing the PCB footprint.

חלופות תחליף ישיר עבור MAX232EEWE+T — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם MAX232EEWE+T (אותו גורם צורה וטביעת רגל) — שונים ב Product Type, Package, Maximum Data Rate, Interface Standard, ESD Protection.

Maxim Integrated
Product Type: RS-232 line-driver and receiver transceiver
Package: 16-pin SOIC
Interface Standard: EIA/TIA-232E and V.28/V.24
השווה עם MAX232EEWE+T →
Analog Devices
Package: 16-pin SOIC
Maximum Data Rate: 200 kb/s
Interface Standard: RS-232
השווה עם MAX232EEWE+T →
Texas Instruments
Product Type: Dual RS-232 driver/receiver
Package: 16-pin SOIC (DW), 0.295 inch / 7.50 mm width
Maximum Data Rate: 250 kbps
השווה עם MAX232EEWE+T →
Maxim Integrated
Package: 16-pin SOIC
ESD Protection: ±15 kV
השווה עם MAX232EEWE+T →
Analog Devices
Product Type: Dual RS-232 transceiver
Package: 16-pin SOIC
Interface Standard: EIA/TIA-232E
השווה עם MAX232EEWE+T →
Analog Devices
Product Type: Dual RS-232 transceiver
Package: 16-pin SOIC
Interface Standard: RS-232
השווה עם MAX232EEWE+T →

MAX232ECWE+

✅ Drop-In
Maxim Integrated
📦 16-SOIC (wide SO, 7.50 mm width)
2 drivers and 2 receivers · Full duplex · RS-232 and V.28 · 120 kbps · 4.5 V to 5.5 V · +5 V · ±15 kV · Integrated

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX232EWE+

✅ Drop-In
Analog Devices
📦 16-SOIC (wide SO, 7.50 mm width)
Dual RS-232 transceiver · RS-232 · 4.5 V to 5.5 V · 5 V · 2 channels · 2 channels · 120 kbps · CMOS

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX232AEWE+

✅ Drop-In ⚠️ מפרטים לא מאומתים
Analog Devices
📦 16-SOIC (wide SO, 7.50 mm width)
2 drivers · 2 receivers · 2/2 full-duplex · RS-232 · +5 V · 200 kb/s · 16-pin SOIC · 7.50 mm

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX232ACWE+

✅ Drop-In ⚠️ מפרטים לא מאומתים
Maxim Integrated
📦 16-SOIC (wide SO, 7.50 mm width)
RS-232 line-driver and receiver transceiver · 2 transmitters / 2 receivers · +5 V · EIA/TIA-232E and V.28/V.24 · 16-pin SOIC · Surface mount

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX232ECDWR

✅ Drop-In ⚠️ מפרטים לא מאומתים
Texas Instruments
📦 16-SOIC (wide SO, 7.50 mm width)
Dual RS-232 driver/receiver · 2 · 2 · 250 kbps · 4.5 V to 5.5 V · Single 5 V supply · IEC 61000-4-2 · 16-pin SOIC (DW), 0.295 inch / 7.50 mm width

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX232EEWE+T מפרטים

Product Type RS-232 transceiver (2 drivers and 2 receivers)
Driver Count 2 channels
Receiver Count 2 channels
Duplex Mode Full duplex
מתח אספקה 5 V
Maximum Data Rate 120 kbps
ESD Protection ±15 kV HBM
RS-232 Compliance EIA/TIA-232E
V.28 Compliance CCITT V.28
Voltage Generation On-chip charge-pump circuitry
מארז 16-pin wide SOIC, 7.50 mm width
מספר פינים 16 pins
סוג הרכבה Surface-mount SMD
Shipping Format Tape and reel

מדריך תצורת פינים של MAX232EEWE+T 16-pin wide soic, 7.50 mm width

תצורת פינים עבור MAX232EEWE+T (מארזת 16-pin wide soic, 7.50 mm width). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 16-pin wide soic, 7.50 mm width עבור MAX232EEWE+T

אין נתוני פריסת פינים מפורטים עבור MAX232EEWE+T.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

MAX232EEWE+T מתאים עבור 6 יישוםs: Industrial Serial Adapters, Data Acquisition Equipment, Point-of-Sale Terminals, Test and Measurement Instruments, Legacy Equipment Migration, Security and Access-Control Systems.

🏭

Industrial Serial Adapters

The MAX232EEWE+T fits industrial adapters that translate between a modern controller's logic-level UART and a legacy RS-232 port. Its two drivers and two receivers provide full-duplex conversion from one 5V supply, while the on-chip charge pump generates the bipolar levels required at the connector. Operation up to 120kbps supports numerous legacy instrumentation and control protocols. The ±15kV HBM ESD rating also makes the interface suitable for exposed equipment connections when the system grounding and cable arrangement are designed correctly.

📊

Data Acquisition Equipment

Data-acquisition equipment can use the MAX232EEWE+T to connect a controller or test instrument to an RS-232-compatible peripheral. The 120kbps maximum data rate is suitable for many legacy measurement-control protocols, and the dual-driver, dual-receiver arrangement avoids separate converter packages for each direction. A single 5V rail simplifies system power design because the charge-pump circuitry generates the positive and negative driver voltages internally. Connector-side protection and ground continuity remain important when data is collected over long or noisy cables.

🖥️

Point-of-Sale Terminals

Point-of-sale terminals and peripheral interfaces commonly retain RS-232 links for scales, printers, card readers, and service equipment. The MAX232EEWE+T offers two transmit and two receive channels, allowing one controller to manage multiple point-to-point serial links while retaining a compact 16-SOIC footprint. Its 5V operation and 120kbps capability align with many legacy peripherals, while ±15kV HBM protection adds interface margin for equipment that may be handled or connected frequently.

🔧

Test and Measurement Instruments

The MAX232EEWE+T can provide a compact logic-level-to-RS-232 interface in test and measurement instruments. Its 120kbps capability is appropriate for many service ports, calibration interfaces, and legacy instrument control protocols. Two drivers and two receivers allow bidirectional command and response traffic, while integrated charge-pump operation reduces the external power circuitry otherwise required for bipolar RS-232 levels. The wide SOIC package is widely supported by assembly and inspection processes, and the ESD rating is relevant to connector-accessible laboratory equipment.

🔄

Legacy Equipment Migration

Legacy equipment migrations often leave an RS-232 port in place while replacing the original controller with a modern processor or embedded module. The MAX232EEWE+T bridges that boundary by converting CMOS-level UART signals into RS-232 levels and returning received data to logic levels. Its 120kbps data-rate limit covers many established peripheral protocols, and the 5V supply simplifies connections with logic-level transceivers and microcontrollers. The same 16-SOIC footprint across several MAX232E variants can also ease mechanical reuse during qualification.

🔒

Security and Access-Control Systems

Access-control readers, controllers, and alarm interfaces may use RS-232 for short-distance command links. The MAX232EEWE+T can translate between the controller's UART logic levels and the reader's bipolar RS-232 interface, using only a single 5V supply. Two drivers and two receivers support bidirectional communication within one package, and 120kbps operation is more than adequate for many configuration and status protocols. The ±15kV HBM ESD rating is useful in access-control equipment where external cables and frequent servicing can expose connectors to electrostatic discharge.

What is the MAX232EEWE+T?
The MAX232EEWE+T is a 5V-powered RS-232 transceiver with two drivers and two receivers in a 16-pin wide SOIC package. According to the Analog Devices MAX232E product page, it supports data rates up to 120kbps and uses integrated charge-pump circuitry to generate the bipolar voltages required by RS-232 drivers. The +T ordering suffix identifies the tape-and-reel shipping format.
What are the key specifications of MAX232EEWE+T that engineers should know?
The MAX232EEWE+T combines two RS-232 drivers, two receivers, a single 5V supply, 120kbps operation, and ±15kV HBM ESD protection in a 16-SOIC package. The Analog Devices MAX232E family is specified for EIA/TIA-232E and CCITT V.28 signaling, and its integrated charge pump eliminates the separate bipolar-supply circuit normally required by RS-232 drivers.
Where can I download the MAX232EEWE+T datasheet PDF?
The official MAX232E datasheet and product documentation are available through Analog Devices at https://www.analog.com/en/products/max232e.html. The manufacturer product page states that the MAX232E family includes the 16-pin SO option used by MAX232EEWE+T, supports rates up to 120kbps, and includes integrated charge-pump circuitry for single +5V operation.
Where can I find the MAX232EEWE+T pinout and package details?
Use the pin-configuration diagram and package information in the Analog Devices MAX232E datasheet linked from the official product page. MAX232EEWE+T is identified as a 16-pin wide SOIC package with a 7.50 mm body width and tape-and-reel shipping format. Verify power, ground, driver-output, receiver-input, and charge-pump capacitor connections against the exact ordering code before PCB release.
Can MAX232EEWE+T operate from a single 5V supply?
Yes. The MAX232EEWE+T operates from a single +5V supply and uses integrated charge-pump circuitry to produce the positive and negative voltage levels required at the RS-232 driver outputs. The Analog Devices MAX232E product page specifically identifies single +5V operation as a defining feature of this transceiver family.
What data rate does MAX232EEWE+T support?
The MAX232EEWE+T supports data rates up to 120kbps. According to the Analog Devices MAX232E product page, the drivers and receivers meet EIA/TIA-232E and CCITT V.28 specifications when loaded at rates up to 120kbps. Actual system throughput also depends on cable length, transceiver loading, grounding, and the serial protocol in use.
What ESD protection does MAX232EEWE+T provide?
The MAX232EEWE+T provides ±15kV human-body-model ESD protection on its RS-232 interface. This rating is identified by Analog Devices as part of the MAX232E family specification. Connector-side protection still depends on correct cable routing, a suitable ground reference, and system-level surge or ESD protection where the attached cable leaves the enclosure.
MAX232EEWE+T vs MAX232ECWE+ - which is better for a new design?
Choose MAX232EEWE+T when its full ±15kV HBM ESD rating is required; the MAX232ECWE+ comparison is appropriate only after confirming the lower-protection variant meets the interface risk assessment. Both devices use a 16-SOIC interface-transceiver format, so the mechanical footprint is compatible. The selection should also compare supply current, receiver thresholds, temperature limits, and availability in the exact production configuration.
What is the difference between MAX232EEWE+T and MAX232EWE+?
The electrically related family options share the 2-driver, 2-receiver RS-232 architecture, while MAX232EEWE+T is supplied in tape-and-reel form. The MAX232EEWE+T ordering code identifies the production and shipping configuration, whereas MAX232EWE+ may use a different tube or reel presentation. For PCB compatibility, verify that the electrical temperature grade and package dimensions match the intended assembly.
When should I choose MAX232EEWE+T over MAX232AEWE+?
Choose MAX232EEWE+T when the required application remains within its specified operating-temperature range and does not require the automotive qualification associated with the MAX232AEWE+ family option. The MAX232EEWE+T provides the same two-channel RS-232 interface concept in a 16-SOIC footprint, but the exact temperature grade, qualification status, and lifecycle conditions must be confirmed before substitution.
Is MAX232EEWE+T suitable for industrial serial adapters?
The MAX232EEWE+T is suitable for many industrial serial adapters because it combines a 5V supply, 120kbps operation, ±15kV HBM ESD protection, and a 16-SOIC package. The device is particularly useful when a controller requires logic-level serial signaling and the external equipment retains an RS-232 port. Confirm temperature limits, connector protection, and grounding against the installation environment.
What can replace MAX232EEWE+T?
The closest drop-in candidates are the same-family MAX232E options in the identical 16-pin wide SOIC footprint, including MAX232EWE+, MAX232ECWE+, MAX232AEWE+, and MAX232ACWE+. Their suitability depends on matching the ESD rating, temperature range, supply limits, and lifecycle requirements. A package match alone is not enough for an unqualified production substitution.
Is MAX232EEWE+T the same as MAX3232EEWE+?
No. The MAX232EEWE+T is a MAX232E RS-232 transceiver, while the MAX3232EEWE+ belongs to the MAX3232 family with additional fail-safe and related interface features. Their physical packages may permit board-level consideration, but their electrical protection and operating behavior must be compared directly. The MAX3232EEWE+ is not a parameter-identical substitute for the MAX232EEWE+T.
Where can I buy MAX232EEWE+T online and what is its price?
Use the Request a Quote form on this page to request the current unit price, stock status, lead time, and order quantity for MAX232EEWE+T. The form allows purchasing teams to confirm the exact 16-SOIC tape-and-reel ordering code without relying on a stale price table. Include your requested delivery date and quantity so the supplier can return an actionable quotation.
What is the lead time and stock status for MAX232EEWE+T?
The current stock position and production lead time for MAX232EEWE+T should be confirmed through the Request a Quote form on this page. Provide the required quantity, target date, and any approved-source requirements when requesting the quotation. The manufacturer lists the MAX232E as an active product family, but a quotation is the appropriate method for current availability and lead-time confirmation.

נתוני עזר הנדסיים עבור MAX232EEWE+T — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the MAX232EEWE+T for a standard single-5V RS-232 interface requiring two drivers, two receivers, operation up to 120kbps, and ±15kV HBM ESD protection in a wide 16-SOIC footprint. MAX232ECWE+ is a same-footprint option when its lower or different ESD rating satisfies the system risk assessment. MAX232EWE+ provides the closest electrical-family match, while MAX232AEWE+, MAX232ACWE+, and MAX232ECDWR may fit different temperature or qualification requirements. Verify each variant's operating range, receiver thresholds, supply current, qualification status, and lifecycle before production approval. Use a MAX3232-family device when fail-safe receiver behavior or other enhanced protection is required rather than a strictly MAX232E-equivalent replacement.

השוואה עם חלופות

פרמטר מוצר זה MAX232ECWE+ MAX232EWE+ MAX232AEWE+ MAX232ACWE+ MAX232ECDWR
Package 16-SOIC (wide SO, 7.50 mm width) 16-SOIC (wide SO, 7.50 mm width) 16-SOIC (wide SO, 7.50 mm width) 16-SOIC (wide SO, 7.50 mm width) 16-SOIC (wide SO, 7.50 mm width) 16-SOIC (wide SO, 7.50 mm width)
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Transceiver Configuration 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers
Supply Voltage 5 V 5 V 5 V 5 V 5 V 5 V
Maximum Data Rate 120 kbps 120 kbps 120 kbps 120 kbps 120 kbps 120 kbps
Voltage Generation Integrated charge-pump circuitry Integrated charge-pump circuitry Integrated charge-pump circuitry Integrated charge-pump circuitry Integrated charge-pump circuitry Integrated charge-pump circuitry

מבדילים עיקריים

  • Full 2/2 RS-232 channel integration (לעומתMAX232ECWE+)
  • Single +5V supply with integrated charge pump (לעומתMAX232AEWE+)
  • Wide 16-SOIC footprint reuse (לעומתMAX232ACWE+)

הערות תכנון

Place the charge-pump capacitors and any decoupling capacitors directly beside their designated MAX232EEWE+T pins, following the layout and component values shown in the manufacturer datasheet. Keep the charge-pump traces short and away from sensitive receiver inputs. Because the device generates bipolar RS-232 voltages internally, long capacitor routes can increase radiated noise and reduce margin in low-noise or long-cable installations.

Do not treat every MAX232-family ordering code as electrically identical. Confirm the supply range, operating temperature, ESD rating, receiver thresholds, and package width before approving a substitute. A wide 16-SOIC footprint does not by itself establish pin compatibility, and the MAX3232 family adds fail-safe behavior that may alter system-level behavior even when the board outline can be reused.

Keep the logic-side UART traces away from the RS-232 driver outputs and charge-pump region to minimize coupling into the receiver path. Provide a low-impedance ground reference beneath the interface, use a suitable return path for the cable, and place any additional connector protection ahead of the transceiver. These steps are important because the MAX232EEWE+T supports 120kbps operation and ±15kV HBM ESD protection, but package-level ESD ratings do not replace correct system grounding.

Use a supply that meets the selected MAX232E variant's voltage and current limits, and verify startup behavior at the system's minimum rail condition. The MAX232EEWE+T generates bipolar driver levels from one 5V rail through its charge pump, which simplifies the power tree but does not remove the need for local bypassing. Check the manufacturer's capacitor recommendations and monitor supply droop when multiple driver channels switch simultaneously.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The MAX232E is a conventional RS-232 interface IC rather than an automotive-qualified device. Explicit RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified in the referenced listings.

הנתונים אומתו בתאריך: 2026-11-17 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

MAX232EEWE+T datasheet MAX232EEWE+T pinout MAX232EEWE+T datasheet pdf MAX232EEWE+T equivalent MAX232EEWE+T drop-in replacement MAX232EEWE+T cross reference MAX232EEWE+T vs MAX232ECWE+ MAX232EEWE+T price MAX232EEWE+T stock Analog Devices MAX232EEWE+T MAX232EEWE+T 16-SOIC MAX232EEWE+T RS-232 transceiver

רכיבים ומונחים קשורים

Analog Devices Maxim Integrated MAX232EEWE+T MAX232E MAX232ECWE+ MAX232EWE+ MAX232AEWE+ MAX232ACWE+ MAX232ECDWR MAX3232EEWE+ RS-232 transceiver interface IC transceiver IC semiconductor EIA/TIA-232E CCITT V.28 5V power supply 120kbps data rate ±15kV HBM ESD protection integrated charge pump 16-SOIC wide SO package surface-mount SMD RS-232 TTL/CMOS full duplex industrial serial adapter data acquisition
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר