Analog Devices

MAX396EPI+ - 16:1 100Ohm CMOS Analog Multiplexer | Analog Devices

MPN: MAX396EPI+ ✓ פעיל
+2.7 V to +16 V Vdss 100 ohms Rds(on) 28-pin PDIP Package
כמות הזמנה מינימלית: 1 |

MAX396EPI+ סקירה

Analog Devices MAX396EPI+ is a precision, low-voltage CMOS analog multiplexer with one 16:1 switch, a maximum on-resistance of 100 ohms, and a 28-pin PDIP package. The device operates from a single +2.7 V to +16 V supply or from ±2.7 V to ±8 V dual supplies while maintaining compatibility with CMOS logic inputs.

An analog multiplexer is an interface IC that connects multiple analog signal sources to a shared processing channel. The MAX396 belongs to the broader analog switch and multiplexer hierarchy, where switch resistance, channel matching, charge injection, leakage, and supply voltage determine how accurately a selected signal reaches the output. This makes the device suitable for precision measurement, data acquisition, test equipment, and industrial control systems.

The MAX396EPI+ provides maximum on-resistance of 100 ohms, with on-resistance matching between switches maintained within 6 ohms. Its on-resistance remains flat over the specified signal range, with a maximum variation of 10 ohms. These characteristics make channel resistance less dependent on signal amplitude than in some multiplexers and support repeatable analog measurements. Charge injection is limited to 5 pC maximum.

The low-voltage silicon-gate CMOS process supports low-power operation while providing fast switching. The multiplexer retains CMOS-logic input compatibility and includes electrostatic-discharge protection greater than 2,000 V per Method 3015.7. Single-supply operation supports +2.7 V to +16 V systems, while dual-supply operation permits bipolar signal ranges of ±2.7 V to ±8 V.

Typical applications include multiplexed data acquisition, sensor signal routing, automated test systems, industrial measurement interfaces, and control systems that must connect several low-voltage analog inputs to one downstream converter or amplifier. Single-supply operation is convenient for compact equipment, whereas dual supplies allow the device to process signals around ground.

When laying out a circuit, keep analog traces short and provide a stable ground reference. Place input and supply decoupling capacitors close to the device, and confirm that the selected signal amplitude, common-mode range, and switching frequency remain within the electrical limits of the application.

This page organizes the key MAX396EPI+ specifications, pin-compatible replacement options, application guidance, and practical design considerations to support faster component selection and PCB implementation.

חלופות תחליף ישיר עבור MAX396EPI+ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם MAX396EPI+ (אותו גורם צורה וטביעת רגל) — שונים ב Multiplexer Configuration, Maximum Charge Injection, Maximum On-Resistance, ESD Protection, Logic Compatibility.

Analog Devices
Multiplexer Configuration: 16:1 single-ended
Maximum Charge Injection: 15 pC
Maximum On-Resistance: 100 ohm
השווה עם MAX396EPI+ →
Analog Devices
Multiplexer Configuration: Dual 8:1 multiplexer
Maximum Charge Injection: 15 pC
Maximum On-Resistance: 100 ohm
השווה עם MAX396EPI+ →
Maxim Integrated
Maximum Charge Injection: 5 pC
Maximum On-Resistance: 100 ohms
ESD Protection: Greater than 2,000 V per Method 3015.7
השווה עם MAX396EPI+ →

MAX396CPI+

✅ Drop-In
Analog Devices
📦 28-PDIP
16 channels · 16:1 · 100Ω maximum · Within 6Ω between switches · 10Ω maximum over the specified signal range · 5pC maximum · +2.7V to +16V · ±2.7V to ±8V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX396EPI

✅ Drop-In
📦 28-PDIP
Legacy ordering designation without the plus suffix; package and core electrical characteristics match

📋 חלופה להתייחסות (לא בקטלוג)

MAX397CPI+

✅ Drop-In
Maxim Integrated
📦 28-PDIP
Dual 8:1 precision CMOS analog multiplexer · 2 circuits · 16-channel dual 8-channel · 8:1 per circuit · 100 ohms · Within 6 ohms · Within 10 ohms over the specified signal range · 5 pC

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

DG406DJ+

✅ Drop-In
Analog Devices
📦 28-PDIP
16:1 single-ended · 16 channels · 1 circuit · 100 ohm · 8 ohm maximum · 9 ohm maximum · 15 pC · 5 nA maximum at +85°C

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

DG407DJ+

✅ Drop-In
Analog Devices
📦 28-PDIP
Dual 8:1 multiplexer · 16-channel dual 8-channel or differential 8-channel · 100 ohm · 8 ohm · 9 ohm · 15 pC · Bidirectional · TTL- and CMOS-compatible

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX396EPI+ מפרטים

Product Type 1-circuit 16:1 analog multiplexer
Multiplexer Configuration 16:1
Maximum On-Resistance 100 ohms
On-Resistance Matching Between Channels 6 ohms maximum
On-Resistance Variation Over Signal Range 10 ohms maximum
Maximum Charge Injection 5 pC
Single-Supply Operating Range +2.7 V to +16 V
Dual-Supply Operating Range ±2.7 V to ±8 V
Logic Compatibility CMOS logic input compatible
ESD Protection Greater than 2,000 V per Method 3015.7
Process Technology Low-voltage silicon-gate CMOS
מארז 28-pin PDIP
סוג הרכבה Through-hole
AEC-Q100 Qualification Not applicable

מדריך תצורת פינים של MAX396EPI+ 28-pin pdip

תצורת פינים עבור MAX396EPI+ (מארזת 28-pin pdip). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 28-pin pdip עבור MAX396EPI+

אין נתוני פריסת פינים מפורטים עבור MAX396EPI+.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

MAX396EPI+ מתאים עבור 6 יישוםs: Multiplexed Data Acquisition, Industrial Sensor Signal Routing, Automated Test Equipment, Precision Voltage Measurement, Battery-Powered Instrument, Bipolar Control Signal Interface.

📡

Multiplexed Data Acquisition

The MAX396EPI+ fits data-acquisition front ends that must connect one of 16 low-voltage sensor inputs to a shared ADC or instrumentation amplifier. Its 100-ohms maximum on-resistance limits channel loading, while matching within 6 ohms helps maintain calibration consistency across selected sources. The low 5-pC maximum charge injection is also useful when the multiplexer sits near a sampling network. Place the device close to the analog input bus, keep traces short, and validate source settling against the ADC acquisition window. The same 16:1 structure simplifies address decoding compared with a bank of discrete switches.

🏭

Industrial Sensor Signal Routing

The MAX396EPI+ is suitable for industrial sensor interfaces that must route temperature, pressure, strain, or position signals from multiple channels into one measurement path. Operation from +2.7 V to +16 V supports both compact low-voltage systems and higher-voltage industrial rails, while ±2.7 V to ±8 V dual supplies support bipolar transducer signals. Its 6-ohm maximum channel-to-channel matching helps reduce gain variation when changing measurement sources. Use a single ground reference, keep high-impedance sensor paths short, and confirm common-mode limits for the selected supply configuration.

🔧

Automated Test Equipment

The MAX396EPI+ can reduce the number of discrete relays required in automated test equipment by selecting one of 16 test points for a common measurement chain. Its 100-ohms maximum on-resistance, low channel variation, and 5-pC maximum charge injection provide predictable behavior when connecting sources, dividers, or stimulus-return paths. The device’s CMOS-compatible address inputs simplify control from common test-controller logic. For precision measurements, verify leakage, off-state isolation, switching time, and settling behavior against the instrumentation settling requirements.

📏

Precision Voltage Measurement

The MAX396EPI+ is appropriate for precision voltage measurement when several input ranges must share a single amplifier or converter. On-resistance matching within 6 ohms reduces variation introduced by the selected switch, while the maximum 10-ohm variation over the signal range supports consistent channel behavior. With a +5 V single supply, the mux fits low-voltage analog boards; with ±5 V dual supplies, it can accept signals around ground. Confirm that the downstream amplifier’s input bias current and the mux’s leakage do not create unacceptable errors at the required measurement accuracy.

🔋

Battery-Powered Instrument

The MAX396EPI+ can serve battery-powered instruments when low-voltage operation and compact analog routing are priorities. Its single-supply range begins at +2.7 V, allowing operation from a 3.3 V system without dual negative rails, while the 16:1 configuration replaces many point-to-point switch paths. The low-voltage CMOS implementation supports portable measurement equipment, although the exact quiescent current and switching energy must be checked for duty-cycle calculations. Use local supply decoupling and avoid long unprotected analog traces to preserve measurement integrity.

⚙️

Bipolar Control Signal Interface

The MAX396EPI+ fits control systems that must select among bipolar command or feedback signals referenced to ground. Dual-supply operation from ±2.7 V to ±8 V permits the switch to handle signals below and above ground while retaining CMOS-compatible address logic. The 100-ohms maximum on-resistance provides a defined insertion resistance for downstream receivers, and the 5-pC maximum charge injection limits control pulses when switching sensitive analog nodes. Validate signal amplitude, common-mode range, and logic thresholds, then keep the analog and digital return paths joined at a controlled ground point.

What is the MAX396EPI+?
The MAX396EPI+ is a precision, one-circuit 16:1 low-voltage CMOS analog multiplexer in a 28-pin PDIP package. According to the Analog Devices MAX396/MAX397 data sheet, it provides 100 ohms maximum on-resistance, channel matching within 6 ohms, and charge injection of 5 pC maximum. It can route one of 16 analog inputs to a common output for measurement, acquisition, or control.
What is the operating voltage of MAX396EPI+?
The MAX396EPI+ operates from +2.7 V to +16 V with a single supply or from ±2.7 V to ±8 V with dual supplies. The Analog Devices MAX396/MAX397 data sheet identifies both configurations while retaining CMOS-logic input compatibility. Single-supply operation simplifies low-voltage equipment, whereas dual-supply operation supports bipolar signals extending above and below ground.
What is the on-resistance of MAX396EPI+?
The MAX396EPI+ has a maximum on-resistance of 100 ohms, with matching between channels maintained within 6 ohms. According to the Analog Devices MAX396/MAX397 data sheet, on-resistance remains flat over the specified signal range, with maximum variation of 10 ohms. These figures are important when the mux feeds a high-impedance amplifier, ADC, or precision instrumentation input.
Where can I download the MAX396EPI+ datasheet PDF?
The official MAX396EPI+ data sheet is available from Analog Devices through the MAX396/MAX397 manufacturer PDF. It covers the MAX396 and MAX397 precision multiplexers, including supply configurations, on-resistance, charge injection, ESD protection, electrical characteristics, pin information, and truth tables. Use the manufacturer document for final design verification and PCB pin assignments.
Can MAX396EPI+ operate from a single +5 V supply?
Yes, the MAX396EPI+ can operate from a single +5 V supply because its specified single-supply range is +2.7 V to +16 V. The Analog Devices MAX396/MAX397 data sheet also confirms CMOS-logic input compatibility. A +5 V implementation is therefore suitable for conventional low-voltage analog systems, provided the selected channel voltages remain within the signal and common-mode limits.
What can replace the MAX396EPI+?
Pin-compatible replacements include the MAX396CPI+, MAX396EPI, MAX397CPI+, DG406DJ+, and DG407DJ+, subject to electrical and temperature qualification. The Analog Devices data sheet explicitly identifies MAX396/MAX397 pin compatibility with MAX306/MAX307 and DG406/DG407 families. Confirm package, temperature grade, supply range, leakage, charge injection, and switching-speed requirements before substitution.
What is the best drop-in replacement for MAX396EPI+?
The MAX396CPI+ is the closest same-family drop-in option because it retains the 28-pin PDIP footprint, 16:1 topology, 100-ohms maximum on-resistance, and ±2.7 V to ±8 V dual-supply capability. Its key distinction is temperature grade. Review the electrical tables before replacing an industrial-temperature design because operating-temperature limits and qualification can affect suitability.
MAX396EPI+ vs MAX396CPI+ — which is better?
The MAX396EPI+ and MAX396CPI+ share the 28-pin PDIP package and principal precision-mux characteristics, but they serve different temperature grades. The MAX396EPI+ is identified by the E industrial-grade ordering code, while MAX396CPI+ uses the C commercial-grade code. Choose according to the required ambient temperature and verify all limits in the manufacturer data sheet before exchanging the parts.
MAX396EPI+ vs MAX397CPI+ — can both be used in the same design?
The MAX396EPI+ is a 16:1 multiplexer, while the MAX397CPI+ belongs to the dual 8-channel MAX397 family and may use a different multiplex configuration. Although the manufacturer family data sheet discusses pin compatibility, a design should not interchange them without confirming the exact truth table, channel arrangement, address logic, and package variant. The MAX396EPI+ remains preferable when one 16:1 mux is required.
When should I choose MAX396EPI+ instead of a DG406DJ+?
Choose the MAX396EPI+ when you specifically require the MAX396 family’s 16:1 multiplexing arrangement, 100-ohms maximum on-resistance, 6-ohm channel matching, and 5-pC maximum charge injection under the stated supply conditions. A DG406DJ+ is relevant for pin-compatible sourcing, but its channel behavior and electrical limits must be compared with the complete MAX396/MAX397 data sheet.
Is MAX396EPI+ suitable for sensor and data-acquisition systems?
The MAX396EPI+ is suitable for low-voltage sensor multiplexing and data-acquisition systems because it offers 100 ohms maximum on-resistance, channel matching within 6 ohms, and low charge injection of 5 pC maximum. According to the Analog Devices data sheet, it also supports single and dual supplies. Buffering, settling time, source impedance, and ADC acquisition time still need to be validated for the complete signal chain.
What is the charge injection of MAX396EPI+?
The MAX396EPI+ has a maximum charge injection of 5 pC. According to the Analog Devices MAX396/MAX397 data sheet, its low-voltage silicon-gate process was selected to achieve extremely low charge injection. The value is particularly relevant when switching capacitor-based sensors, sampling-and-hold circuits, or low-current measurements where a control pulse could create an unwanted transient.
Where can I buy MAX396EPI+ and what is its lead time?
Use the Request a Quote form on this page to request current MAX396EPI+ availability, commercial terms, and lead time for the 28-pin PDIP configuration. The manufacturer lists the MAX396 family as production, but current inventory and delivery schedules can change by region and order quantity. The form allows an engineer to request the exact MPN and packaging information without relying on stale availability data.
What is the price of MAX396EPI+?
Request a current quote for MAX396EPI+ through the Request a Quote form on this page. Pricing depends on order quantity, sourcing channel, delivery destination, and component traceability. The form lets the buyer request the exact 28-pin PDIP part number and obtain current commercial terms for production planning.
What are the key specifications engineers should know about MAX396EPI+?
The MAX396EPI+ is a 16:1 CMOS analog mux with 100-ohms maximum on-resistance, 6-ohm maximum channel matching, 5-pC maximum charge injection, and ESD protection above 2,000 V per Method 3015.7. According to the Analog Devices MAX396/MAX397 data sheet, it supports +2.7 V to +16 V single-supply or ±2.7 V to ±8 V dual-supply operation in a 28-pin PDIP package.

נתוני עזר הנדסיים עבור MAX396EPI+ — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the MAX396EPI+ when the design requires one 16:1 analog multiplexer, a 28-pin PDIP footprint, and characterized precision performance including 100-ohms maximum on-resistance, 6-ohm channel matching, and 5-pC maximum charge injection. It is particularly suitable for low-voltage sensor routing, automated test systems, and measurement equipment that can use either single or dual supplies.

Use the MAX396CPI+ when the same electrical and package family is needed for commercial-temperature production after checking the required temperature range. The MAX396EPI is relevant for legacy procurement because it retains the same 28-PDIP footprint and core MAX396 characteristics.

Consider the MAX397CPI+ only when a dual 8-channel arrangement is acceptable, and confirm its truth table. The DG406DJ+ and DG407DJ+ are pin-compatible sourcing alternatives identified by the manufacturer, but their different channel configurations mean that address decoding, truth-table behavior, leakage, switching speed, and electrical limits must be reviewed before substitution.

השוואה עם חלופות

פרמטר מוצר זה MAX396CPI+ MAX396EPI MAX397CPI+ DG406DJ+ DG407DJ+
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 28-PDIP 28-PDIP 28-PDIP 28-PDIP 28-PDIP 28-PDIP
Multiplexer Configuration 16:1 16:1 16:1 Dual 8-channel 4:1 or dual 4:1 4:1 or dual 4:1

מבדילים עיקריים

  • Single 16:1 multiplexing arrangement (לעומתDG407DJ+)
  • Defined channel-to-channel resistance matching (לעומתDG406DJ+)
  • Low charge injection for analog switching (לעומתMAX396EPI)
  • Single and dual low-voltage supply operation (לעומתMAX397CPI+)

הערות תכנון

Route the 16 analog inputs and common analog output as compact, quiet traces, with the mux positioned close to the sensor or measurement source. Long traces can act as antenna-like pickup paths and add resistance that becomes significant beside the specified 100-ohms maximum on-resistance. Keep digital address lines away from the analog output, provide a continuous ground plane, and place supply-decoupling capacitors near the power pins.

Check source impedance and downstream capacitance before selecting the mux. The 100-ohms maximum on-resistance combines with source resistance and wiring capacitance to form an RC settling network, so a nominally correct switch may require extra acquisition time at high source impedances. For low-current or capacitor-based sensors, also evaluate the 5-pC maximum charge injection because each address transition can create a voltage transient.

Decouple the supply pins locally and select bypass values that suppress ripple on both the single-supply and dual-supply rails used by the design. The device accepts +2.7 V to +16 V or ±2.7 V to ±8 V, but the allowed signal range remains tied to the selected supply configuration. Verify address-logic levels, output limits, and injected switching transients against the exact operating mode in the manufacturer data sheet.

Do not substitute MAX397, DG406, or DG407 parts solely because they use a compatible 28-pin footprint. The MAX397 uses a dual 8-channel arrangement, while the DG406 and DG407 families have different channel configurations and truth tables. Confirm address mapping, selected-channel behavior, electrical limits, temperature grade, and package suffix before treating any listed alternative as a production drop-in replacement.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The manufacturer data sheet identifies ESD protection greater than 2,000 V per Method 3015.7. RoHS, REACH, lead-free, halogen-free, and conflict-minerals statuses were not established from the cited product information.

חיפושים קשורים

MAX396EPI+ datasheet MAX396EPI+ datasheet pdf MAX396EPI+ pinout MAX396EPI+ equivalent MAX396EPI+ replacement MAX396EPI+ price MAX396EPI+ stock Analog Devices MAX396EPI+ MAX396EPI+ 28-PDIP multiplexer MAX396EPI+ 16:1 analog mux MAX396EPI+ 100 ohm on resistance MAX396EPI+ data acquisition application MAX396EPI+ vs MAX396CPI+

רכיבים ומונחים קשורים

Analog Devices MAX396EPI+ MAX396 MAX397 MAX396CPI+ MAX396EPI MAX397CPI+ DG406DJ+ DG407DJ+ analog multiplexer analog switch multiplexer interface IC CMOS low-voltage silicon-gate process on-resistance charge injection common-mode range single-supply operation dual-supply operation 28-PDIP through-hole package data acquisition sensor signal routing automated test equipment Method 3015.7
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר