TUSB212RWBT - USB 2.0 HS Signal Conditioner | Texas Instruments
MPN: TUSB212RWBT ✓ פעילTUSB212RWBT סקירה
A USB signal conditioner is an interface IC placed within a USB data path to improve signal integrity without changing the underlying USB protocol. Its hierarchy is USB interface device, signal-processing interface IC, and interface IC. The TUSB212 specifically targets USB 2.0 channels in which connector launches, PCB traces, cables, or intervening devices have introduced bandwidth-related distortion. The conditioner supports USB 2.0, OTG 2.0, and Battery Charger 1.2 environments as identified by Texas Instruments.
The principal features include programmable AC boost, programmable DC boost, pin-strap or I2C configuration, and selectable gain. According to the manufacturer product page, the device supports channels up to 5 meters before the conditioning point or 2 meters after it. It also handles D1P/M and D2P/M interchangeably, is agnostic to host or device roles, and maintains compatibility across Low-Speed, Full-Speed, and High-Speed signals.
Technically, the TUSB212 applies frequency-dependent correction intended to counter channel loss and intersymbol interference. AC boost controls the high-frequency correction applied to the data waveform, while DC boost adjusts the low-frequency transition baseline. Four selectable AC boost settings are described by Texas Instruments, and the I2C or pin-strap interface allows implementation choices to suit board constraints. The design is intended to preserve Low-Speed and Full-Speed characteristics while compensating High-Speed signals.
Typical applications include USB hubs, host controllers, peripheral ports, cable assemblies, docking systems, and test equipment with degraded or lossy channels. The interchangeable D1P/M and D2P/M interfaces simplify symmetrical USB routing, while the compact 12-X2QFN package supports space-constrained portable and industrial designs. The I2C configuration option also permits controlled adjustments where fixed pin straps are insufficient.
Designers should place the conditioner close to the channel impairment boundary and confirm the supported pre-channel or post-channel distance. USB differential routing must preserve controlled impedance and minimize stubs, while the I2C and configuration pins require appropriate pull networks. Verify the selected boost setting with compliance masks, eye diagrams, and worst-case cable and connector combinations rather than relying on nominal channel length alone.
חלופות תחליף ישיר עבור TUSB212RWBT — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם TUSB212RWBT (אותו גורם צורה וטביעת רגל) — שונים ב Package.
TUSB212RWBR
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←TUSB212RWBT מפרטים
| Product Type | USB 2.0 high-speed signal conditioner |
| USB Version | USB 2.0 |
| Supported USB Speeds | Low-Speed, Full-Speed, and High-Speed |
| Compatibility | USB 2.0, OTG 2.0, and BC 1.2 |
| Maximum Pre-Channel Length | 5 m |
| Maximum Post-Channel Length | 2 m |
| AC Boost Configuration | Four selectable settings |
| Configuration Interface | Pin strap or I2C |
| Differential Pair Handling | D1P/M and D2P/M interchangeable |
| Host Device Role | Host and device agnostic |
| Gain Architecture | Selectable gain with daisy-chain support |
| Correction Function | Intersymbol interference compensation |
| מארז | 12-X2QFN |
| Package Dimensions | 1.6 mm x 1.6 mm |
| סוג הרכבה | Surface mount |
| סטטוס RoHS | Compliant |
| סטטוס מחזור חיים | Active |
מדריך תצורת פינים של TUSB212RWBT 1.6 mm x 1.6 mm
תצורת פינים עבור TUSB212RWBT (מארזת 1.6 mm x 1.6 mm). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור TUSB212RWBT.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
TUSB212RWBT מתאים עבור 6 יישוםs: USB 2.0 Hub Signal Conditioning, USB Docking Station Interconnect, Portable USB-C to USB-A Adapter, USB Test and Measurement Fixture, Industrial USB Gateway, USB Host Expansion Card.
USB 2.0 Hub Signal Conditioning
The TUSB212RWBT fits between a USB 2.0 hub downstream port and a loss-prone interconnect when High-Speed eye margin has degraded. Its four selectable AC boost settings, programmable DC boost, and support for Low-Speed, Full-Speed, and High-Speed signaling allow one device to serve mixed-speed ports without intentionally changing slower traffic. Position the conditioner near the impairment boundary, retain controlled differential impedance, and verify each boost setting with eye diagrams. The stated 5-meter pre-channel and 2-meter post-channel limits must be treated as maximum design constraints rather than guaranteed margin in every cable and connector combination.
מומלץ
USB Docking Station Interconnect
A docking station often combines long internal traces, connector launches, and external cable transitions that can degrade USB 2.0 High-Speed signals. The TUSB212RWBT provides programmable AC and DC boost to compensate for that channel, while its interchangeable D1P/M and D2P/M interfaces simplify polarity-aware routing. Use pin straps for a fixed, validated setting or I2C when firmware needs to adjust compensation. Confirm compliance at the longest supported post-channel distance of 2 meters and test combinations of dock cable, display adapters, and peripheral loads rather than relying on a nominal cable-length figure.
מומלץ
Portable USB-C to USB-A Adapter
Compact adapters can place a USB 2.0 High-Speed channel across a PCB transition between connector types, increasing insertion-loss and impedance-discontinuity risk. The TUSB212RWBT’s 12-X2QFN package measures 1.6 mm by 1.6 mm, allowing signal repair close to the transition without dominating a small board. Its Low-Speed and Full-Speed agnostic behavior preserves compatibility with attached accessories. Designers should maintain uniform impedance through the adapter, avoid unnecessary branches, and use the manufacturer recommended QFN land pattern and exposed-pad connection for reliable operation.
מומלץ
USB Test and Measurement Fixture
Test fixtures frequently include long cable tails, adapters, relay contacts, and probe structures that increase USB High-Speed channel loss. The TUSB212RWBT can compensate for intersymbol interference in such a channel while remaining transparent to Low-Speed and Full-Speed operation. Pin-strap control is useful for a repeatable laboratory configuration, while I2C control permits automated characterization of AC boost and DC boost values. Validate the fixture with the intended cables and accessories and record eye width, jitter, and compliance results for every supported configuration.
מומלץ
Industrial USB Gateway
Industrial gateways often connect external sensors and service equipment through USB ports with cable runs longer than typical internal board channels. The TUSB212RWBT can be placed close to the impaired interface to apply selectable High-Speed compensation, while its host/device-agnostic design supports both sides of a USB connection. Configure the boost through pins for a fixed gateway design or use I2C for controlled adaptation. Confirm electromagnetic behavior, ground continuity, and USB compliance in the finished enclosure because external cable and chassis transitions can materially change the channel response.
מומלץ
USB Host Expansion Card
A host expansion card can suffer from loss accumulated across a mainboard connector, internal cable, and external peripheral lead. The TUSB212RWBT can correct the resulting USB 2.0 High-Speed intersymbol interference without changing the host protocol or requiring a separate path for lower speeds. Its compact 12-X2QFN package supports placement near the expansion connector, and its configurable AC and DC boost allows channel-specific tuning. Use the 5-meter pre-channel or 2-meter post-channel guidance as a boundary, then verify eye diagrams and mask compliance with the actual interconnect.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור TUSB212RWBT — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | TUSB212RWBR |
|---|---|---|
| Package | 12-X2QFN | 12-X2QFN |
| Brand | Texas Instruments | Texas Instruments |
| Product Type | USB 2.0 high-speed signal conditioner | USB 2.0 high-speed signal conditioner |
| USB Compatibility | USB 2.0, OTG 2.0, and BC 1.2 | USB 2.0, OTG 2.0, and BC 1.2 |
| Supported Signaling | Low-Speed, Full-Speed, and High-Speed | Low-Speed, Full-Speed, and High-Speed |
| Configuration Method | Pin strap or I2C | Pin strap or I2C |
| AC Boost | Four selectable settings | Four selectable settings |
| DC Boost | Programmable | Programmable |
| Maximum Pre-Channel Length | 5 m | 5 m |
| Maximum Post-Channel Length | 2 m | 2 m |
| Package Dimensions | 1.6 mm x 1.6 mm | 1.6 mm x 1.6 mm |
מבדילים עיקריים
- Combines AC boost, DC boost, and selectable gain in one USB conditioner (לעומתTUSB212RWBR)
- Preserves Low-Speed and Full-Speed behavior while correcting High-Speed loss (לעומתTUSB212RWBR)
- Supports both fixed and firmware-managed compensation control (לעומתTUSB212RWBR)
הערות תכנון
Place the TUSB212RWBT near the boundary where the USB channel begins losing usable High-Speed margin. Keep the D1 and D2 traces matched, preserve the intended differential impedance, and avoid stubs or test pads that create reflections. Follow the Texas Instruments recommended 12-X2QFN land pattern and exposed-pad connection. Validate the final assembly with eye diagrams because connector launches, via structures, and cable transitions can dominate the conditioner’s own contribution.
Tune AC boost and DC boost from measured channel response rather than selecting the strongest available setting. Begin with eye width, jitter, and USB mask results at the intended worst-case cable and load, then evaluate the four selectable AC boost settings comparatively. Excessive equalization can increase jitter or create unintended waveform distortion. A repeatable bench procedure helps prevent the compensated channel from appearing acceptable only at room temperature with one test setup.
Use the supply and decoupling recommendations in the Texas Instruments TUSB212 datasheet when assigning the power pins and ground connections. Keep input and output bypass paths short, provide the required exposed-pad connection, and maintain a low-impedance ground reference. Since detailed supply-voltage and current limits are not established for the exact variant here, verify them in the manufacturer documentation before fixing the power architecture.
Do not treat the 5-meter pre-channel and 2-meter post-channel figures as guaranteed compliance in every implementation. The usable distance depends on the complete signal path, including connectors, cables, PCB transitions, loads, and the selected boost mode. Also verify whether the channel is upstream or downstream of the conditioner, because the applicable boundary differs. Document the worst-case configuration and retest it after cable, firmware, or board changes.
מידע על תאימות
The exact TUSB212RWBT listing identifies the device as RoHS compliant and active. No exact-variant qualification or material-compliance statement establishes REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.