XC7A100T-L2CSG324E - 28nm Artix-7 FPGA | AMD Control
MPN: XC7A100T-L2CSG324E ✓ פעילXC7A100T-L2CSG324E סקירה
An FPGA is a programmable semiconductor whose configurable logic blocks, block RAM, and digital signal processing resources implement digital functions in hardware. The XC7A100T belongs to the Artix-7 family, a low-cost and low-power FPGA product line positioned between conventional programmable logic and larger application processors. Compared with a microcontroller executing instructions, an FPGA performs parallel hardware operations with predictable timing and supports designs that can be updated through a programmable configuration bitstream.
The device provides 101,440 logic cells for general digital control, data acquisition, protocol handling, and embedded signal-processing functions. Its 4,860 Kb of block RAM supports buffering, packet storage, and data-path workflows, while 240 DSP slices accelerate multiply and accumulate operations commonly required by filtering, transforms, and digital waveform processing. The 324-terminal surface-mount package provides a substantial I/O complement for external memory, converters, transceivers, and control interfaces.
The XC7A100T-L2CSG324E combines a cost-oriented 28 nm FPGA architecture with a 1 V speed grade and extended-temperature junction rating. The -L2 ordering code identifies its performance class, while CSG324 denotes the 324-terminal CSPBGA package used by this ordering variant. Because the device is a BGA package, its electrical, thermal, and mechanical implementation depends on multilayer PCB design, controlled-impedance routing, and careful power and ground distribution.
Typical uses include industrial control and automation, high-speed data acquisition, communications infrastructure, test and measurement equipment, embedded vision, and digital signal processing. Its logic, RAM, and DSP resources make it suitable for parallel sensor fusion, protocol conversion, waveform generation, and real-time filtering where deterministic hardware execution is valuable. The same programming model can support rapid product customization without changing the PCB when the FPGA resources and package pins are sufficient.
PCB implementation should follow the AMD Artix-7 package pinout files and the applicable device layout guidance. Decoupling networks, auxiliary power rails, configuration interfaces, clocking, and high-speed routing must be reviewed together because BGA escape routing, via access, return paths, and power-plane geometry can determine whether the design meets timing and signal-integrity objectives.
This product page combines the exact Artix-7 device attributes, ordering-code distinctions, same-package hardware alternatives, and application-focused design guidance to support component selection and hardware planning without requiring a board respin.
חלופות תחליף ישיר עבור XC7A100T-L2CSG324E — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם XC7A100T-L2CSG324E (אותו גורם צורה וטביעת רגל) — שונים ב Package, Speed Grade, Logic Cells, Block RAM, DSP Slices.
XC7A100T-3CSG324E
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←XC7A100T-2CSG324I
✅ Drop-In✓ במלאי
$105 / יחידה
הצג גיליון נתונים ←XC7A100T-2CSG324C
✅ Drop-In ⚠️ מפרטים לא מאומתים✓ במלאי
$59.5 / יחידה
הצג גיליון נתונים ←XC7A100T-1CSG324C
✅ Drop-In✓ במלאי
$59.9 / יחידה
הצג גיליון נתונים ←XC7A100T-1CSG324E
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
XC7A100T-L2CSG324E דירוגים מרביים ומאפיינים חשמליים
| FPGA Family | Artix-7 |
| Logic Cells | 101,440 cells |
| Block RAM | 4,860 Kb |
| DSP Slices | 240 slices |
| Process Technology | 28 nm |
| Operating Voltage Class | 1 V |
| מארז | 324-terminal FC-BGA (CSG324) |
| Terminal Count | 324 terminals |
| Temperature Grade | Extended, E grade |
| Junction Temperature Range | 0°C to 100°C |
| Speed Grade | -L2 |
| סוג הרכבה | Surface mount |
| Programmable Logic Type | FPGA |
| On-Chip RAM | 4,860 Kb block RAM |
| Digital Signal Processing | 240 DSP slices |
מדריך תצורת פינים של XC7A100T-L2CSG324E 324-terminal fc-bga (csg324)
תצורת פינים עבור XC7A100T-L2CSG324E (מארזת 324-terminal fc-bga (csg324)). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור XC7A100T-L2CSG324E.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
XC7A100T-L2CSG324E מתאים עבור 6 יישוםs: Industrial Automation Control, Communications Protocol Conversion, High-Speed Data Acquisition, Test and Measurement Instrumentation, Embedded Vision Processing, Digital Signal Processing.
Industrial Automation Control
The XC7A100T-L2CSG324E fits industrial automation controllers that require multiple deterministic digital paths and local signal processing. Its 101,440 logic cells can implement sequencing, interlocks, counters, communication protocols, and machine-control logic in parallel, while the 240 DSP slices can support motion-related calculations. The 4,860 Kb of block RAM is useful for trace buffers and short-term process data. In a controller, the FPGA can bridge sensors, actuator drivers, and communications hardware while maintaining predictable hardware execution. The 1 V class also requires the board to implement the auxiliary supply and sequencing network defined for the Artix-7 family. Because the device is a 324-terminal BGA, power integrity, escape routing, and thermal performance should be validated early rather than after schematic completion.
מומלץ
Communications Protocol Conversion
The XC7A100T-L2CSG324E is suitable for communications equipment that must translate between serial interfaces, frame formats, and packet buffers. The 101,440 logic cells provide parallel resources for headers, checksums, state machines, and timing constraints, while 4,860 Kb of block RAM can buffer incoming and outgoing frames. The 240 DSP slices can accelerate filtering or signal operations when the design includes modulated data. Place the FPGA between network transceivers and a host processor, then use internal FIFOs to decouple bus timing from external latency. A -L2 device requires timing validation against the selected transceiver and clocking scheme, while the 324-ball package needs carefully planned power, ground, and high-speed escape routing. Regenerate the bitstream and verify protocol interoperability whenever the FPGA grade or tool version changes.
מומלץ
High-Speed Data Acquisition
The XC7A100T-L2CSG324E can serve as the digital processing core of a high-speed acquisition system by combining parallel interface logic, block-RAM storage, and dedicated DSP resources. The 240 DSP slices are suited to FIR filters, digital downconversion, peak detection, and multiply-accumulate pipelines, while the 4,860 Kb of block RAM supports sample buffers and parallel-to-serial data organization. A practical design places the FPGA between high-speed converters and memory or a host interface, with clocking arranged to preserve deterministic sample timing. The 1 V device class and 324-terminal BGA require careful attention to supply sequencing, decoupling, thermal paths, and via access. Conversion performance should be verified with the actual converter, clock source, board stack-up, and selected I/O standard rather than inferred from logic-cell count alone.
מומלץ
Test and Measurement Instrumentation
The XC7A100T-L2CSG324E fits programmable test and measurement instruments that combine precise sequencing, deep logic resources, and real-time arithmetic. Instrument-control logic can run in the 101,440-cell fabric, while 4,860 Kb of block RAM stores captured vectors and results. The 240 DSP slices allow filters, correlation functions, and waveform transforms to execute as parallel pipelines rather than sequential software routines. In an instrument, the FPGA can coordinate an ADC, DAC, clock generator, and communications interface while maintaining fixed latency between trigger and acquisition events. The extended-temperature E-grade ordering option supports a 0°C to 100°C junction range, but the complete instrument still needs enclosure airflow, board thermal modeling, and calibration margin. Clock jitter, I/O standards, and analog accuracy remain system-level constraints outside the FPGA itself.
מומלץ
Embedded Vision Processing
The XC7A100T-L2CSG324E can implement embedded image pipelines where parallel pixel processing and deterministic latency are important. Its 101,440 logic cells can manage frame timing, pixel routing, thresholding, and control interfaces, while the 240 DSP slices support filter and correlation operations. The 4,860 Kb of block RAM is suitable for line buffers, feature storage, and short frame segments. A typical implementation accepts image data from a sensor or transceiver, performs parallel processing in the fabric, and forwards reduced data to a processor or display interface. The 324-ball CSG324 package offers many user I/O resources, but high-volume pixel traffic requires disciplined bank planning, clock distribution, and signal-integrity review. The -L2 class must also pass timing analysis under the intended clocking scheme, and a complete vision system should verify sensor synchronization and thermal behavior at the enclosure level.
מומלץ
Digital Signal Processing
The XC7A100T-L2CSG324E is suitable for fixed-point signal processing that benefits from parallel arithmetic and dedicated DSP hardware. Its 240 DSP slices can implement FIR, IIR, and transform-related pipelines, while 4,860 Kb of block RAM can hold coefficients, sample histories, and channel buffers. The 101,440 logic cells support control sequencing, data-format conversion, and interfaces to converters or processors. In a practical design, parallel samples enter the DSP pipeline, arithmetic stages operate concurrently, and a clock-frequency or data-ready signal manages throughput. Real-world performance depends on clock frequency, cascade configuration, memory bandwidth, and I/O timing rather than DSP-slice count alone. Board-level review should address 1 V rail integrity, decoupling, BGA via access, controlled-impedance routing, and thermal rise under sustained arithmetic load. Confirm all constraints with the actual device toolchain before releasing production hardware.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור XC7A100T-L2CSG324E — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | XC7A100T-3CSG324E | XC7A100T-2CSG324I | XC7A100T-2CSG324C | XC7A100T-1CSG324C | XC7A100T-1CSG324E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FC-BGA-324 (CSG324) | FC-BGA-324 (CSG324) | FC-BGA-324 (CSG324) | FC-BGA-324 (CSG324) | FC-BGA-324 (CSG324) | FC-BGA-324 (CSG324) |
| Logic Cells | 101,440 cells | 101,440 cells | 101,440 cells | 101,440 cells | 101,440 cells | 101,440 cells |
| Block RAM | 4,860 Kb | 4,860 Kb | 4,860 Kb | 4,860 Kb | 4,860 Kb | 4,860 Kb |
| DSP Slices | 240 slices | 240 slices | 240 slices | 240 slices | 240 slices | 240 slices |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Speed Grade | -L2 | -3 | -2 | -2 | -1 | -1 |
| Temperature Designation | E, 0°C to 100°C junction | E, 0°C to 100°C junction | I-grade temperature designation | C-grade temperature designation | C-grade temperature designation | E, 0°C to 100°C junction |
| Special Qualification | Extended-temperature E grade | Extended-temperature E grade | Industrial I-grade temperature designation | Commercial C-grade temperature designation | Commercial C-grade temperature designation | Extended-temperature E grade |
מבדילים עיקריים
- Matches the specified -L2 performance class (לעומתXC7A100T-3CSG324E)
- Uses the same device resources and CSG324 footprint as the listed family alternatives (לעומתXC7A100T-2CSG324I)
- Extended-temperature E-grade selection (לעומתXC7A100T-2CSG324C)
- Balanced Artix-7 resource mix for control and signal processing (לעומתXC7A100T-1CSG324C)
הערות תכנון
Implement the 1 V core rail and every auxiliary supply with the decoupling, sequencing, and tolerance required by the AMD Artix-7 power guidance. Place each decoupling capacitor close to its associated BGA supply and ground balls, use adequate via access beneath the device, and avoid splitting power planes in a way that forces high-current return paths through signal areas. Review startup and shutdown waveforms at the device balls, including tolerance, droop, and sequencing delay, before the PCB layout is frozen.
Use the exact CSG324 package drawing and AMD Artix-7 package pinout files when defining the footprint. Confirm ball numbering, land geometry, solder-mask definition, paste pattern, via-in-pad rules, and the exposed thermal behavior against the selected assembly process. Because a single routing error can affect a power, configuration, clock, or user I/O ball, complete an independent pin-by-pin cross-check of the schematic symbol, constraint file, and physical footprint.
Plan high-speed interfaces and clock distribution before routing ordinary user I/O. Use short reference-plane transitions, controlled-impedance geometry where required, and symmetrical clock routing with matched loads. Keep configuration signals away from noisy analog or switching circuits, follow the device pin constraints for banks and supply requirements, and reserve clean routing channels for sensitive inputs. Re-run signal-integrity and timing analysis with the final stack-up and component placement.
Model the 324-terminal BGA assembly using the actual PCB stack-up, copper distribution, airflow, and neighboring heat sources. The FPGA’s dynamic power depends on logic utilization, clock activity, RAM access, and DSP utilization, so calculate a realistic activity factor rather than relying on a nominal device total. Use layer spreading and copper areas that comply with package assembly rules, and verify junction temperature under worst-case environmental and workload conditions. A reduced-power bitstream may lower dissipation but can reduce timing performance, so both constraints require signoff.
מידע על תאימות
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for the exact ordering code. The E designation is treated as an extended-temperature ordering option and is not interpreted as an automotive qualification statement.