ADC12040CIVY vs ADC12DL040CIVS तुलना

विस्तृत दोनों ओर की तुलना ADC12040CIVY द्वारा Texas Instruments और ADC12DL040CIVS द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
ADC12040CIVY ADC12040CIVY - 12-Bit 40MSPS Pipelined ADC | Texas Instruments

ADC12040CIVY - 12-Bit 40MSPS Pipelined ADC | Texas Instruments

ADC12040CIVY ✓ सक्रिय

विशेषता तुलना

पैरामीटर ADC12040CIVY ADC12DL040CIVS
ब्रांड Texas Instruments Texas Instruments
श्रेणी ADC/DAC ADC/DAC
लाइफसाइकिल स्थिति सक्रिय NRND
रेज़ोल्यूशन 12 bit 12 Bits
सैंपलिंग रेट 40 MSPS (min 40 MSPS over temperature) —
Number of Channels 1 input 2 (dual, simultaneous sampling)
Architecture Pipelined Pipelined CMOS
सप्लाई वोल्टेज +5V ±5% (single supply) —
Power Consumption 340 mW (typ) at 40 MHz —
Differential Non-Linearity (DNL) ±0.4 LSB (typ) —
Signal-to-Noise Ratio (SNR) 69 dB (typ) at fIN = 10 MHz —
Effective Number of Bits (ENOB) 11.2 bits (typ) at fIN = 10 MHz —
Input Type Differential (single-ended capable) —
Reference Type External, with internal buffer —
Digital Output Interface Parallel, CMOS, straight binary —
Digital Output Logic Levels 2.35V to 5V compatible —
Power Down Mode On-chip (low quiescent between conversions) —
ऑपरेटिंग तापमान रेंज -40C to +85C (industrial) —
पैकेज 32-LQFP (NEY) 7x7 mm 64-pin TQFP (PAG) 10x10 mm, surface-mount
माउंटिंग प्रकार Surface Mount —
Pin Family Compatibility Pin compatible with ADC12010, ADC12020, ADC12L063, ADC12L066 —
RoHS स्थिति Compliant (NOPB suffix variants only; check exact suffix) —
Sample Rate (per channel) — 40 MSPS
Analog Supply Voltage — 3.0 V (2.7 V to 3.6 V range)
Digital Output Driver Supply — 2.4 V to 3.6 V (separate DVDD)
Power Dissipation (typical) — 210 mW
Power-Down Mode — Yes
SNR (fIN = 10 MHz) — 69 dB (typical)
SFDR (fIN = 10 MHz) — 85 dB (typical)
DNL (Differential Non-Linearity) — ±0.3 LSB (typical)
INL (Integral Non-Linearity) — [DATA_NEEDED: INL spec]
Internal Reference — Yes (factory-trimmed, not user-adjustable)
Sample-and-Hold — Internal, dual
Duty Cycle Stabilizer — Yes
Multiplexed Output Mode — Yes (channels share single 12-bit bus)
Output Format — Straight Binary, offset binary, 2's complement (per pin strapping)
Input Clock — Single-ended or differential; 50 Ω terminated internally
ऑपरेटिंग तापमान — -40 °C to +85 °C (industrial)
MSL (Moisture Sensitivity Level) — [DATA_NEEDED: MSL level]
Lead Finish / RoHS — Lead-free / RoHS status depends on orderable suffix (see datasheet ordering info)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध