ADC12040CIVY vs ADC12DL040CIVS Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng ADC12040CIVY sa pamamagitan ng Texas Instruments at ADC12DL040CIVS sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
ADC12040CIVY - 12-Bit 40MSPS Pipelined ADC | Texas Instruments
ADC12040CIVY ✓ NakahandaTexas Instruments
ADC12DL040CIVS - Dual 12-Bit 40 MSPS 3V ADC | Texas Instruments
ADC12DL040CIVS NrndPagsanggunian na paghahambing
| Parametro | ADC12040CIVY | ADC12DL040CIVS |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Kategorya | ADC/DAC | ADC/DAC |
| Katayuan ng Lifecycle | Aktibo | NRND |
| Pangangasiwaan | 12 bit | 12 Bits |
| Rate ng Pagkupita | 40 MSPS (min 40 MSPS over temperature) | — |
| Number of Channels | 1 input | 2 (dual, simultaneous sampling) |
| Architecture | Pipelined | Pipelined CMOS |
| Volte ng Pagbibigay | +5V ±5% (single supply) | — |
| Power Consumption | 340 mW (typ) at 40 MHz | — |
| Differential Non-Linearity (DNL) | ±0.4 LSB (typ) | — |
| Signal-to-Noise Ratio (SNR) | 69 dB (typ) at fIN = 10 MHz | — |
| Effective Number of Bits (ENOB) | 11.2 bits (typ) at fIN = 10 MHz | — |
| Input Type | Differential (single-ended capable) | — |
| Reference Type | External, with internal buffer | — |
| Digital Output Interface | Parallel, CMOS, straight binary | — |
| Digital Output Logic Levels | 2.35V to 5V compatible | — |
| Power Down Mode | On-chip (low quiescent between conversions) | — |
| Hanay ng Temperature na Operasyon | -40C to +85C (industrial) | — |
| Packhaging | 32-LQFP (NEY) 7x7 mm | 64-pin TQFP (PAG) 10x10 mm, surface-mount |
| Uri ng Pagpapasok | Surface Mount | — |
| Pin Family Compatibility | Pin compatible with ADC12010, ADC12020, ADC12L063, ADC12L066 | — |
| Tindminan RoHS | Compliant (NOPB suffix variants only; check exact suffix) | — |
| Sample Rate (per channel) | — | 40 MSPS |
| Analog Supply Voltage | — | 3.0 V (2.7 V to 3.6 V range) |
| Digital Output Driver Supply | — | 2.4 V to 3.6 V (separate DVDD) |
| Power Dissipation (typical) | — | 210 mW |
| Power-Down Mode | — | Yes |
| SNR (fIN = 10 MHz) | — | 69 dB (typical) |
| SFDR (fIN = 10 MHz) | — | 85 dB (typical) |
| DNL (Differential Non-Linearity) | — | ±0.3 LSB (typical) |
| INL (Integral Non-Linearity) | — | [DATA_NEEDED: INL spec] |
| Internal Reference | — | Yes (factory-trimmed, not user-adjustable) |
| Sample-and-Hold | — | Internal, dual |
| Duty Cycle Stabilizer | — | Yes |
| Multiplexed Output Mode | — | Yes (channels share single 12-bit bus) |
| Output Format | — | Straight Binary, offset binary, 2's complement (per pin strapping) |
| Input Clock | — | Single-ended or differential; 50 Ω terminated internally |
| Temperature na Operasyon | — | -40 °C to +85 °C (industrial) |
| MSL (Moisture Sensitivity Level) | — | [DATA_NEEDED: MSL level] |
| Lead Finish / RoHS | — | Lead-free / RoHS status depends on orderable suffix (see datasheet ordering info) |