ADC12DL040CIVS vs ADC12040CIVY तुलना

विस्तृत दोनों ओर की तुलना ADC12DL040CIVS द्वारा Texas Instruments और ADC12040CIVY द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
ADC12040CIVY ADC12040CIVY - 12-Bit 40MSPS Pipelined ADC | Texas Instruments

ADC12040CIVY - 12-Bit 40MSPS Pipelined ADC | Texas Instruments

ADC12040CIVY ✓ सक्रिय

विशेषता तुलना

पैरामीटर ADC12DL040CIVS ADC12040CIVY
ब्रांड Texas Instruments Texas Instruments
श्रेणी ADC/DAC ADC/DAC
लाइफसाइकिल स्थिति NRND सक्रिय
रेज़ोल्यूशन 12 Bits 12 bit
Number of Channels 2 (dual, simultaneous sampling) 1 input
Sample Rate (per channel) 40 MSPS —
Architecture Pipelined CMOS Pipelined
Analog Supply Voltage 3.0 V (2.7 V to 3.6 V range) —
Digital Output Driver Supply 2.4 V to 3.6 V (separate DVDD) —
Power Dissipation (typical) 210 mW —
Power-Down Mode Yes —
SNR (fIN = 10 MHz) 69 dB (typical) —
SFDR (fIN = 10 MHz) 85 dB (typical) —
DNL (Differential Non-Linearity) ±0.3 LSB (typical) —
INL (Integral Non-Linearity) [DATA_NEEDED: INL spec] —
Internal Reference Yes (factory-trimmed, not user-adjustable) —
Sample-and-Hold Internal, dual —
Duty Cycle Stabilizer Yes —
Multiplexed Output Mode Yes (channels share single 12-bit bus) —
Output Format Straight Binary, offset binary, 2's complement (per pin strapping) —
Input Clock Single-ended or differential; 50 Ω terminated internally —
ऑपरेटिंग तापमान -40 °C to +85 °C (industrial) —
पैकेज 64-pin TQFP (PAG) 10x10 mm, surface-mount 32-LQFP (NEY) 7x7 mm
MSL (Moisture Sensitivity Level) [DATA_NEEDED: MSL level] —
Lead Finish / RoHS Lead-free / RoHS status depends on orderable suffix (see datasheet ordering info) —
सैंपलिंग रेट — 40 MSPS (min 40 MSPS over temperature)
सप्लाई वोल्टेज — +5V ±5% (single supply)
Power Consumption — 340 mW (typ) at 40 MHz
Differential Non-Linearity (DNL) — ±0.4 LSB (typ)
Signal-to-Noise Ratio (SNR) — 69 dB (typ) at fIN = 10 MHz
Effective Number of Bits (ENOB) — 11.2 bits (typ) at fIN = 10 MHz
Input Type — Differential (single-ended capable)
Reference Type — External, with internal buffer
Digital Output Interface — Parallel, CMOS, straight binary
Digital Output Logic Levels — 2.35V to 5V compatible
Power Down Mode — On-chip (low quiescent between conversions)
ऑपरेटिंग तापमान रेंज — -40C to +85C (industrial)
माउंटिंग प्रकार — Surface Mount
Pin Family Compatibility — Pin compatible with ADC12010, ADC12020, ADC12L063, ADC12L066
RoHS स्थिति — Compliant (NOPB suffix variants only; check exact suffix)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध