ADC12DL040CIVS vs ADC12040CIVY Perbandingan

Perbandingan bersamaan detil ADC12DL040CIVS dari Texas Instruments dan ADC12040CIVY dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Texas Instruments
ADC12040CIVY ADC12040CIVY - 12-Bit 40MSPS Pipelined ADC | Texas Instruments

ADC12040CIVY - 12-Bit 40MSPS Pipelined ADC | Texas Instruments

ADC12040CIVY ✓ Aktif

Perbandingan Spesifikasi

Parameter Umum ADC12DL040CIVS ADC12040CIVY
Merek Texas Instruments Texas Instruments
Kategori ADC/DAC ADC/DAC
Status Lingkungan Hidup NRND Aktif
Resolusi 12 Bits 12 bit
Number of Channels 2 (dual, simultaneous sampling) 1 input
Sample Rate (per channel) 40 MSPS —
Architecture Pipelined CMOS Pipelined
Analog Supply Voltage 3.0 V (2.7 V to 3.6 V range) —
Digital Output Driver Supply 2.4 V to 3.6 V (separate DVDD) —
Power Dissipation (typical) 210 mW —
Power-Down Mode Yes —
SNR (fIN = 10 MHz) 69 dB (typical) —
SFDR (fIN = 10 MHz) 85 dB (typical) —
DNL (Differential Non-Linearity) ±0.3 LSB (typical) —
INL (Integral Non-Linearity) [DATA_NEEDED: INL spec] —
Internal Reference Yes (factory-trimmed, not user-adjustable) —
Sample-and-Hold Internal, dual —
Duty Cycle Stabilizer Yes —
Multiplexed Output Mode Yes (channels share single 12-bit bus) —
Output Format Straight Binary, offset binary, 2's complement (per pin strapping) —
Input Clock Single-ended or differential; 50 Ω terminated internally —
Suhu Kerja -40 °C to +85 °C (industrial) —
Paket 64-pin TQFP (PAG) 10x10 mm, surface-mount 32-LQFP (NEY) 7x7 mm
MSL (Moisture Sensitivity Level) [DATA_NEEDED: MSL level] —
Lead Finish / RoHS Lead-free / RoHS status depends on orderable suffix (see datasheet ordering info) —
Laju Pengambilan Sampel — 40 MSPS (min 40 MSPS over temperature)
Tegangan Pemuat — +5V ±5% (single supply)
Power Consumption — 340 mW (typ) at 40 MHz
Differential Non-Linearity (DNL) — ±0.4 LSB (typ)
Signal-to-Noise Ratio (SNR) — 69 dB (typ) at fIN = 10 MHz
Effective Number of Bits (ENOB) — 11.2 bits (typ) at fIN = 10 MHz
Input Type — Differential (single-ended capable)
Reference Type — External, with internal buffer
Digital Output Interface — Parallel, CMOS, straight binary
Digital Output Logic Levels — 2.35V to 5V compatible
Power Down Mode — On-chip (low quiescent between conversions)
Rentang Suhu Kerja — -40C to +85C (industrial)
Tipe Mounting — Surface Mount
Pin Family Compatibility — Pin compatible with ADC12010, ADC12020, ADC12L063, ADC12L066
Status RoHS — Compliant (NOPB suffix variants only; check exact suffix)

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon