BTH60702EPVXUMA1 vs BTS51202EKAXUMA1 तुलना

विस्तृत दोनों ओर की तुलना BTH60702EPVXUMA1 द्वारा Infineon और BTS51202EKAXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BTH60702EPVXUMA1 BTH60702EPVXUMA1 - 60 mΩ Dual High-Side Switch 1.7A | Infineon

BTH60702EPVXUMA1 - 60 mΩ Dual High-Side Switch 1.7A | Infineon

BTH60702EPVXUMA1 ✓ सक्रिय
Infineon
BTS51202EKAXUMA1 BTS51202EKAXUMA1 - 120 mΩ Dual Smart High-Side Switch | Infineon

BTS51202EKAXUMA1 - 120 mΩ Dual Smart High-Side Switch | Infineon

BTS51202EKAXUMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर BTH60702EPVXUMA1 BTS51202EKAXUMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Manufacturer Infineon Technologies —
Product Family PROFET + 48V —
फ़ंक्शन Smart high-side power switch (dual channel, 2 x 1:1) —
On-State Resistance (typ.) 60 mΩ per channel —
Continuous Load Current (per channel) 1.7 A —
Number of Channels 2 2
Configuration 2 x 1:1 (dual independent high-side) —
ट्रांज़िस्टर प्रकार N-channel vertical power MOSFET with charge pump —
Nominal Operating Voltage 48 V board net —
Maximum Supply Voltage 54 V —
Load Voltage Range [DATA_NEEDED: load voltage range] —
Current Sense / Diagnosis Yes (analog current-sense output) —
Protection Features Over-load, short-circuit, over-voltage, reverse battery, thermal shutdown —
पैकेज PG-TSDSO-14 with exposed pad PG-DSO-14-40-EP (14-pin SOIC with exposed pad)
Operating Temperature (junction) -40 °C to +150 °C (automotive grade) —
माउंटिंग प्रकार Surface Mount Surface Mount
MSL स्तर [DATA_NEEDED: MSL level] —
RoHS स्थिति Compliant Compliant
टोपोलॉजी — Dual High-Side Switch (2 channels)
Technology — Smart6 (N-channel vertical MOSFET with charge pump)
On-State Resistance (RDS(on)) — 120 mΩ (typical per channel)
Continuous Output Current — 2 A per channel (typical 2.5 A)
Operating Voltage (Vbb) — 8 V to 18 V
Load Type — Lamps up to 1×10 W, LEDs, resistive/inductive loads
ऑपरेटिंग तापमान — -40 °C to +150 °C
Maximum Power Dissipation — 1800 mW
Integrated Protection — Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery
Diagnostic Output — Yes (status feedback pin)
Charge Pump — Integrated
Automotive Qualified — Yes

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध