BTS3035TFATMA1 vs ITS4090QEPDXUMA1 तुलना

विस्तृत दोनों ओर की तुलना BTS3035TFATMA1 द्वारा Infineon और ITS4090QEPDXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BTS3035TFATMA1 BTS3035TFATMA1 - 5A 12V Low-Side Switch | Infineon HITFET

BTS3035TFATMA1 - 5A 12V Low-Side Switch | Infineon HITFET

BTS3035TFATMA1 ✓ सक्रिय
Infineon
ITS4090QEPDXUMA1 ITS4090QEPDXUMA1 - 90mΩ Quad Smart High-Side Switch | Infineon

ITS4090QEPDXUMA1 - 90mΩ Quad Smart High-Side Switch | Infineon

ITS4090QEPDXUMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर BTS3035TFATMA1 ITS4090QEPDXUMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power Distribution Switches
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Low-Side Power Switch Quad-Channel Smart High-Side Power Switch
Technology N-Channel MOSFET —
Number of Channels 1 4
Input Type CMOS Logic Level —
Continuous Drain Current 5 A —
On-Resistance (RDS(on)) 30 mOhm (typical) —
Drain-Source Voltage (VDS) Max 40 V —
Operating Voltage Range 12 V nominal (load-dump tolerant to 40 V) —
Fault Protection Over-current, Short-circuit, Over-temperature, ESD —
Status Feedback Yes (open-drain diagnostic output) —
Reverse Battery Protection Integrated —
ऑपरेटिंग तापमान रेंज -40C to +150C (junction) -40 °C to +150 °C (Tj)
पैकेज PG-TO252-3-313 (DPAK) PG-TSDSO-14 (exposed pad)
माउंटिंग प्रकार Surface Mount Surface Mount
MSL स्तर [DATA_NEEDED: MSL moisture sensitivity level] [DATA_NEEDED: MSL rating]
RoHS स्थिति Compliant Compliant
Automotive Grade AEC-Q100 qualified —
Family — PROFET (PROtected FET) 24V/48V
टोपोलॉजी — High-Side Switch (N-Channel DMOS)
Typical RDS(ON) per Channel — 90 mΩ
RDS(ON) at Tj = 125 °C — 140 mΩ (typical)
Nominal Continuous Output Current per Channel — 750 mA
Minimum Current per Channel — 500 mA
Supply Voltage Range (Operating) — 4.5 V to 45 V
Supply Voltage Range (Absolute Maximum) — -0.3 V to 45 V
On-State Input Voltage (Logic High) — [DATA_NEEDED: VIH threshold]
Diagnostic Feedback — Current-sense IS pin (analog proportional to load)
Protection Features — Over-current, over-temperature, over-voltage, short-circuit, reverse battery (with external resistor)
PWM Capability — Up to 1 kHz (typical)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध