BTS3035TFATMA1 vs ITS4090QEPDXUMA1 Karşılaştırma
Ayrıntılı yan yana karşılaştırma BTS3035TFATMA1 tarafından Infineon ve ITS4090QEPDXUMA1 tarafından InfineonAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | BTS3035TFATMA1 | ITS4090QEPDXUMA1 |
|---|---|---|
| Marka | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power Distribution Switches |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Low-Side Power Switch | Quad-Channel Smart High-Side Power Switch |
| Technology | N-Channel MOSFET | — |
| Number of Channels | 1 | 4 |
| Input Type | CMOS Logic Level | — |
| Continuous Drain Current | 5 A | — |
| On-Resistance (RDS(on)) | 30 mOhm (typical) | — |
| Drain-Source Voltage (VDS) Max | 40 V | — |
| Operating Voltage Range | 12 V nominal (load-dump tolerant to 40 V) | — |
| Fault Protection | Over-current, Short-circuit, Over-temperature, ESD | — |
| Status Feedback | Yes (open-drain diagnostic output) | — |
| Reverse Battery Protection | Integrated | — |
| İşletim Sıcaklığı Aralığı | -40C to +150C (junction) | -40 °C to +150 °C (Tj) |
| Paket | PG-TO252-3-313 (DPAK) | PG-TSDSO-14 (exposed pad) |
| Montaj Türü | Surface Mount | Surface Mount |
| MSL Seviyesi | [DATA_NEEDED: MSL moisture sensitivity level] | [DATA_NEEDED: MSL rating] |
| RoHS Durumu | Compliant | Compliant |
| Automotive Grade | AEC-Q100 qualified | — |
| Family | — | PROFET (PROtected FET) 24V/48V |
| Ağ Yapısı | — | High-Side Switch (N-Channel DMOS) |
| Typical RDS(ON) per Channel | — | 90 mΩ |
| RDS(ON) at Tj = 125 °C | — | 140 mΩ (typical) |
| Nominal Continuous Output Current per Channel | — | 750 mA |
| Minimum Current per Channel | — | 500 mA |
| Supply Voltage Range (Operating) | — | 4.5 V to 45 V |
| Supply Voltage Range (Absolute Maximum) | — | -0.3 V to 45 V |
| On-State Input Voltage (Logic High) | — | [DATA_NEEDED: VIH threshold] |
| Diagnostic Feedback | — | Current-sense IS pin (analog proportional to load) |
| Protection Features | — | Over-current, over-temperature, over-voltage, short-circuit, reverse battery (with external resistor) |
| PWM Capability | — | Up to 1 kHz (typical) |