BTS3035TFATMA1 vs ITS4090QEPDXUMA1 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci BTS3035TFATMA1 disebabkan oleh Infineon dan ITS4090QEPDXUMA1 disebabkan oleh Infineon. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | BTS3035TFATMA1 | ITS4090QEPDXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power Distribution Switches |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Low-Side Power Switch | Quad-Channel Smart High-Side Power Switch |
| Technology | N-Channel MOSFET | — |
| Number of Channels | 1 | 4 |
| Input Type | CMOS Logic Level | — |
| Continuous Drain Current | 5 A | — |
| On-Resistance (RDS(on)) | 30 mOhm (typical) | — |
| Drain-Source Voltage (VDS) Max | 40 V | — |
| Operating Voltage Range | 12 V nominal (load-dump tolerant to 40 V) | — |
| Fault Protection | Over-current, Short-circuit, Over-temperature, ESD | — |
| Status Feedback | Yes (open-drain diagnostic output) | — |
| Reverse Battery Protection | Integrated | — |
| Gambaran Suhu Operasi | -40C to +150C (junction) | -40 °C to +150 °C (Tj) |
| Kemasan | PG-TO252-3-313 (DPAK) | PG-TSDSO-14 (exposed pad) |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Aras MSL | [DATA_NEEDED: MSL moisture sensitivity level] | [DATA_NEEDED: MSL rating] |
| Status RoHS | Compliant | Compliant |
| Automotive Grade | AEC-Q100 qualified | — |
| Family | — | PROFET (PROtected FET) 24V/48V |
| Tetstruktur | — | High-Side Switch (N-Channel DMOS) |
| Typical RDS(ON) per Channel | — | 90 mΩ |
| RDS(ON) at Tj = 125 °C | — | 140 mΩ (typical) |
| Nominal Continuous Output Current per Channel | — | 750 mA |
| Minimum Current per Channel | — | 500 mA |
| Supply Voltage Range (Operating) | — | 4.5 V to 45 V |
| Supply Voltage Range (Absolute Maximum) | — | -0.3 V to 45 V |
| On-State Input Voltage (Logic High) | — | [DATA_NEEDED: VIH threshold] |
| Diagnostic Feedback | — | Current-sense IS pin (analog proportional to load) |
| Protection Features | — | Over-current, over-temperature, over-voltage, short-circuit, reverse battery (with external resistor) |
| PWM Capability | — | Up to 1 kHz (typical) |