DRV8434ARGER vs DRV8886PWPR तुलना

विस्तृत दोनों ओर की तुलना DRV8434ARGER द्वारा Texas Instruments और DRV8886PWPR द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
DRV8434ARGER DRV8434ARGER - 48V 2.5A Stepper Driver w/ Stall Detect | TI

DRV8434ARGER - 48V 2.5A Stepper Driver w/ Stall Detect | TI

DRV8434ARGER ✓ सक्रिय
Texas Instruments
DRV8886PWPR DRV8886PWPR - 37V 2A Bipolar Stepper Driver HTSSOP-24 | TI

DRV8886PWPR - 37V 2A Bipolar Stepper Driver HTSSOP-24 | TI

DRV8886PWPR ✓ सक्रिय

विशेषता तुलना

पैरामीटर DRV8434ARGER DRV8886PWPR
ब्रांड Texas Instruments Texas Instruments
श्रेणी Motor Drivers Motor Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Motor Type Bipolar stepper Bipolar stepper (2-phase)
Number of H-Bridges 2 —
आउटपुट कॉन्फ़िगरेशन NMOS H-bridge —
Supply Voltage (VM) 4.5 V to 48 V —
Full-Scale Output Current 2.5 A per phase (peak) —
RMS Output Current 1.5 A per phase (typical) 1.4 A (24 V, TA = 25 C, PCB-dependent)
Microstepping Resolution Full-step to 1/256 step —
Current Sensing Integrated (no external sense resistor) Internal (no external sense resistor)
Stall Detection Yes (GPIO output) —
Decay Mode Smart Tune (mixed decay) —
Control Interface Step/Direction + SPI STEP / DIR
Sleep Pin Yes (nSLEEP, active low) —
Fault Pin Yes (nFAULT, active low, open-drain) —
Protection Features UVLO, OCP, OVP, OTP, open load, stall UVLO, OCP, TSD, open-load detect, charge-pump UV
ऑपरेटिंग तापमान -40 C to +125 C —
पैकेज VQFN-24 (RGE) 4x4 mm with thermal pad HTSSOP-24 (PWP) with PowerPAD
माउंटिंग प्रकार Surface Mount Surface Mount
MSL स्तर 2 (1 year floor life) —
RoHS स्थिति Compliant Compliant
Number of Full H-Bridges — 2
Operating Supply Voltage (VM) — 8 V to 37 V
Absolute Maximum VM — 40 V
Full-Scale Output Current (per phase) — 2 A
Peak Output Current — 3 A
HS + LS On-Resistance (RDSon) — 550 mOhm
Microstepping Levels — Up to 1/16 step
Decay Modes — 8 configurable modes including Smart Tune
PWM Chopping Frequency — Up to 50 kHz
Sleep Current — 20 uA (typical)
Logic Supply Voltage (VINT) — 3 V to 5.5 V
ऑपरेटिंग तापमान रेंज — -40 C to +125 C
Fault Output — nFAULT (active-low, open-drain)
AEC-Q100 Qualified — No (use DRV8886ATPWP for automotive)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध