DRV8434ARGER vs DRV8886PWPR Karşılaştırma

Ayrıntılı yan yana karşılaştırma DRV8434ARGER tarafından Texas Instruments ve DRV8886PWPR tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Texas Instruments
DRV8434ARGER DRV8434ARGER - 48V 2.5A Stepper Driver w/ Stall Detect | TI

DRV8434ARGER - 48V 2.5A Stepper Driver w/ Stall Detect | TI

DRV8434ARGER ✓ Aktif
Texas Instruments
DRV8886PWPR DRV8886PWPR - 37V 2A Bipolar Stepper Driver HTSSOP-24 | TI

DRV8886PWPR - 37V 2A Bipolar Stepper Driver HTSSOP-24 | TI

DRV8886PWPR ✓ Aktif

Özellik Karşılaştırması

Parametre DRV8434ARGER DRV8886PWPR
Marka Texas Instruments Texas Instruments
Kategori Motor Drivers Motor Drivers
Yaşam Döngüsü Durumu Aktif Aktif
Motor Type Bipolar stepper Bipolar stepper (2-phase)
Number of H-Bridges 2 —
Çıkış Konfigürasyonu NMOS H-bridge —
Supply Voltage (VM) 4.5 V to 48 V —
Full-Scale Output Current 2.5 A per phase (peak) —
RMS Output Current 1.5 A per phase (typical) 1.4 A (24 V, TA = 25 C, PCB-dependent)
Microstepping Resolution Full-step to 1/256 step —
Current Sensing Integrated (no external sense resistor) Internal (no external sense resistor)
Stall Detection Yes (GPIO output) —
Decay Mode Smart Tune (mixed decay) —
Control Interface Step/Direction + SPI STEP / DIR
Sleep Pin Yes (nSLEEP, active low) —
Fault Pin Yes (nFAULT, active low, open-drain) —
Protection Features UVLO, OCP, OVP, OTP, open load, stall UVLO, OCP, TSD, open-load detect, charge-pump UV
İşletim Sıcaklığı -40 C to +125 C —
Paket VQFN-24 (RGE) 4x4 mm with thermal pad HTSSOP-24 (PWP) with PowerPAD
Montaj Türü Surface Mount Surface Mount
MSL Seviyesi 2 (1 year floor life) —
RoHS Durumu Compliant Compliant
Number of Full H-Bridges — 2
Operating Supply Voltage (VM) — 8 V to 37 V
Absolute Maximum VM — 40 V
Full-Scale Output Current (per phase) — 2 A
Peak Output Current — 3 A
HS + LS On-Resistance (RDSon) — 550 mOhm
Microstepping Levels — Up to 1/16 step
Decay Modes — 8 configurable modes including Smart Tune
PWM Chopping Frequency — Up to 50 kHz
Sleep Current — 20 uA (typical)
Logic Supply Voltage (VINT) — 3 V to 5.5 V
İşletim Sıcaklığı Aralığı — -40 C to +125 C
Fault Output — nFAULT (active-low, open-drain)
AEC-Q100 Qualified — No (use DRV8886ATPWP for automotive)

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin