DRV8434ARGER vs DRV8886PWPR So sánh

So sánh chi tiết song song của DRV8434ARGER bằng Texas Instruments và DRV8886PWPR bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
DRV8434ARGER DRV8434ARGER - 48V 2.5A Stepper Driver w/ Stall Detect | TI

DRV8434ARGER - 48V 2.5A Stepper Driver w/ Stall Detect | TI

DRV8434ARGER ✓ Hoạt động
Texas Instruments
DRV8886PWPR DRV8886PWPR - 37V 2A Bipolar Stepper Driver HTSSOP-24 | TI

DRV8886PWPR - 37V 2A Bipolar Stepper Driver HTSSOP-24 | TI

DRV8886PWPR ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số DRV8434ARGER DRV8886PWPR
Thương hiệu Texas Instruments Texas Instruments
Danh mục Motor Drivers Motor Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Motor Type Bipolar stepper Bipolar stepper (2-phase)
Number of H-Bridges 2 —
Cấu hình đầu ra NMOS H-bridge —
Supply Voltage (VM) 4.5 V to 48 V —
Full-Scale Output Current 2.5 A per phase (peak) —
RMS Output Current 1.5 A per phase (typical) 1.4 A (24 V, TA = 25 C, PCB-dependent)
Microstepping Resolution Full-step to 1/256 step —
Current Sensing Integrated (no external sense resistor) Internal (no external sense resistor)
Stall Detection Yes (GPIO output) —
Decay Mode Smart Tune (mixed decay) —
Control Interface Step/Direction + SPI STEP / DIR
Sleep Pin Yes (nSLEEP, active low) —
Fault Pin Yes (nFAULT, active low, open-drain) —
Protection Features UVLO, OCP, OVP, OTP, open load, stall UVLO, OCP, TSD, open-load detect, charge-pump UV
Nhiệt độ hoạt động -40 C to +125 C —
Hộp VQFN-24 (RGE) 4x4 mm with thermal pad HTSSOP-24 (PWP) with PowerPAD
Kiểu lắp đặt Surface Mount Surface Mount
Cấp MSL 2 (1 year floor life) —
Trạng thái RoHS Compliant Compliant
Number of Full H-Bridges — 2
Operating Supply Voltage (VM) — 8 V to 37 V
Absolute Maximum VM — 40 V
Full-Scale Output Current (per phase) — 2 A
Peak Output Current — 3 A
HS + LS On-Resistance (RDSon) — 550 mOhm
Microstepping Levels — Up to 1/16 step
Decay Modes — 8 configurable modes including Smart Tune
PWM Chopping Frequency — Up to 50 kHz
Sleep Current — 20 uA (typical)
Logic Supply Voltage (VINT) — 3 V to 5.5 V
Khoảng nhiệt độ hoạt động — -40 C to +125 C
Fault Output — nFAULT (active-low, open-drain)
AEC-Q100 Qualified — No (use DRV8886ATPWP for automotive)

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá